With linux-image-3.0.0-32-generic-pae_3.0.0-32.51_i386.deb i get the following error message when I insert my SDHC card:
[ 132.205270] mmc0: Timeout waiting for hardware interrupt. [ 132.205293] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 132.205340] sdhci: Sys addr: 0x00000000 | Version: 0x00001502 [ 132.205347] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 132.205354] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 132.205362] sdhci: Present: 0x1eff0001 | Host ctl: 0x00000001 [ 132.205369] sdhci: Power: 0x0000000f | Blk gap: 0x00000000 [ 132.205376] sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa07 [ 132.205382] sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 [ 132.205390] sdhci: Int enab: 0x00ff00c3 | Sig enab: 0x00ff00c3 [ 132.205397] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 132.205404] sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177 [ 132.205411] sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 [ 132.205416] sdhci: Host ctl2: 0x00000000 [ 132.205422] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 [ 132.205425] sdhci: =========================================== After rmmod tg3, the SDHC card is still not detected: [ 373.921459] tg3.c:v3.119 (May 18, 2011) [ 373.934630] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 373.934659] tg3 0000:04:00.0: setting latency timer to 64 After modprobe tg3, the SDHC card is still not working properly: [ 373.961035] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:42:5d:df [ 373.961048] tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 373.961056] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 373.961063] tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 373.982018] tg3 0000:04:00.0: irq 42 for MSI/MSI-X [ 373.982029] tg3 0000:04:00.0: irq 43 for MSI/MSI-X [ 373.982036] tg3 0000:04:00.0: irq 44 for MSI/MSI-X [ 374.554915] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 384.593374] mmc0: Timeout waiting for hardware interrupt. [ 384.593385] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 384.593434] sdhci: Sys addr: 0x00000000 | Version: 0x00001502 [ 384.593443] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 384.593451] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 384.593460] sdhci: Present: 0x1fff0001 | Host ctl: 0x00000001 [ 384.593469] sdhci: Power: 0x0000000d | Blk gap: 0x00000000 [ 384.593477] sdhci: Wake-up: 0x00000000 | Clock: 0x0000f447 [ 384.593486] sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 [ 384.593495] sdhci: Int enab: 0x00ff00c3 | Sig enab: 0x00ff00c3 [ 384.593503] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 384.593512] sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177 [ 384.593521] sdhci: Cmd: 0x0000371a | Max curr: 0x00000000 [ 384.593527] sdhci: Host ctl2: 0x00000000 [ 384.593535] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 [ 384.593539] sdhci: =========================================== Removed and re-insert the card: [ 386.565361] mmc0: Card removed during transfer! [ 386.565372] mmc0: Resetting controller. [ 386.574142] mmc0: error -123 whilst initialising SD card -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1178131 Title: 14e4:16bc SD card slot not working on Acer Aspire One 756 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1178131/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
