Reply to request for more info: Here is a /var/log/dmesg file as it was immediately after a system crash and cold boot (see under the line of asterisks below). Following this, I included the endings of two other dmesg files, showing what came after the line, "Bluetooth: BNEP socket layer initialized," since the next two were different than the first one, which ended with that line.
************************************************************* [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-22-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #33-Ubuntu SMP Thu May 16 15:17:14 UTC 2013 (Ubuntu 3.8.0-22.33-generic 3.8.11) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-22-generic root=UUID=f0914b6a-90d7-4c75-95c1-afe10214cb3a ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7faffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7fb0000-0x00000000b7fbdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b7fbe000-0x00000000b7fdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b7fe0000-0x00000000b7fedfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b7ff0000-0x00000000b7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/M2N68-AM SE2, BIOS 0704 05/19/2009 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back [ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000B0000000 mask FFFFF8000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000140000000 aka 5120M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xb8000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0xb7faffff] [ 0.000000] [mem 0x00000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xb7dfffff] page 2M [ 0.000000] [mem 0xb7e00000-0xb7faffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xb7faffff @ [mem 0x1fffd000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff] [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G [ 0.000000] kernel direct mapping tables up to 0x13fffffff @ [mem 0xb7faf000-0xb7faffff] [ 0.000000] RAMDISK: [mem 0x36120000-0x37087fff] [ 0.000000] ACPI: RSDP 00000000000fbcd0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000b7fb0000 00038 (v01 051909 RSDT1739 20090519 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000b7fb0200 00084 (v02 051909 FACP1739 20090519 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000b7fb0450 066FA (v01 A1269 A1269000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000b7fbe000 00040 [ 0.000000] ACPI: APIC 00000000b7fb0390 00080 (v01 051909 APIC1739 20090519 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000b7fb0410 0003C (v01 051909 OEMMCFG 20090519 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000b7fbe040 00071 (v01 051909 OEMB1739 20090519 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000b7fb6b50 00038 (v01 051909 OEMHPET0 20090519 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009afff] [ 0.000000] node 0: [mem 0x00100000-0xb7faffff] [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] [ 0.000000] On node 0 totalpages: 1015611 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3909 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11711 pages used for memmap [ 0.000000] DMA32 zone: 737777 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fbe000 [ 0.000000] PM: Registered nosave memory: 00000000b7fbe000 - 00000000b7fe0000 [ 0.000000] PM: Registered nosave memory: 00000000b7fe0000 - 00000000b7fee000 [ 0.000000] PM: Registered nosave memory: 00000000b7fee000 - 00000000b7ff0000 [ 0.000000] PM: Registered nosave memory: 00000000b7ff0000 - 00000000b8000000 [ 0.000000] PM: Registered nosave memory: 00000000b8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] e820: [mem 0xb8000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s85056 r8192 d21440 u524288 [ 0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999734 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-22-generic root=UUID=f0914b6a-90d7-4c75-95c1-afe10214cb3a ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ ff40000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ ac000000 [ 0.000000] PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000 [ 0.000000] Memory: 3835316k/5242880k available (7006k kernel code, 1180436k absent, 227128k reserved, 6237k data, 996k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16252928 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2812.529 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.05 BogoMIPS (lpj=11250116) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000033] Security Framework initialized [ 0.000045] AppArmor: AppArmor initialized [ 0.000046] Yama: becoming mindful. [ 0.000407] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002059] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002799] Mount-cache hash table entries: 256 [ 0.002987] Initializing cgroup subsys cpuacct [ 0.002989] Initializing cgroup subsys memory [ 0.002998] Initializing cgroup subsys devices [ 0.003000] Initializing cgroup subsys freezer [ 0.003002] Initializing cgroup subsys blkio [ 0.003003] Initializing cgroup subsys perf_event [ 0.003006] Initializing cgroup subsys hugetlb [ 0.003029] tseg: 0000000000 [ 0.003042] CPU: Physical Processor ID: 0 [ 0.003043] CPU: Processor Core ID: 0 [ 0.003045] mce: CPU supports 6 MCE banks [ 0.003050] LVT offset 0 assigned for vector 0xf9 [ 0.003055] process: using AMD E400 aware idle routine [ 0.003058] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.003058] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.003058] tlb_flushall_shift: 4 [ 0.003159] Freeing SMP alternatives: 24k freed [ 0.004604] ACPI: Core revision 20121018 [ 0.007194] ftrace: allocating 26693 entries in 105 pages [ 0.018520] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.058200] smpboot: CPU0: AMD Athlon(tm) 7850 Dual-Core Processor (fam: 10, model: 02, stepping: 03) [ 0.165338] Performance Events: AMD PMU driver. [ 0.165343] ... version: 0 [ 0.165344] ... bit width: 48 [ 0.165345] ... generic registers: 4 [ 0.165346] ... value mask: 0000ffffffffffff [ 0.165347] ... max period: 00007fffffffffff [ 0.165347] ... fixed-purpose events: 0 [ 0.165348] ... event mask: 000000000000000f [ 0.166376] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.166459] smpboot: Booting Node 0, Processors #1 [ 0.179494] Brought up 2 CPUs [ 0.179496] smpboot: Total of 2 processors activated (11250.11 BogoMIPS) [ 0.180915] devtmpfs: initialized [ 0.182405] EVM: security.selinux [ 0.182406] EVM: security.SMACK64 [ 0.182408] EVM: security.capability [ 0.182474] PM: Registering ACPI NVS region [mem 0xb7fbe000-0xb7fdffff] (139264 bytes) [ 0.183390] regulator-dummy: no parameters [ 0.183439] NET: Registered protocol family 16 [ 0.183548] node 0 link 0: io port [1000, ffffff] [ 0.183550] TOM: 00000000c0000000 aka 3072M [ 0.183553] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.183555] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.183558] node 0 link 0: mmio [a0000, bffff] [ 0.183560] node 0 link 0: mmio [c0000000, fe0bffff] ==> [c0000000, dfffffff] and [f0000000, fe0bffff] [ 0.183562] TOM2: 0000000140000000 aka 5120M [ 0.183564] bus: [bus 00-07] on node 0 link 0 [ 0.183565] bus: 00 [io 0x0000-0xffff] [ 0.183567] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.183568] bus: 00 [mem 0xc0000000-0xdfffffff] [ 0.183569] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.183570] bus: 00 [mem 0x140000000-0xfcffffffff] [ 0.183636] ACPI: bus type pci registered [ 0.183687] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.183689] PCI: not using MMCONFIG [ 0.183690] PCI: Using configuration type 1 for base access [ 0.183691] PCI: Using configuration type 1 for extended access [ 0.183822] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.183823] mtrr: probably your BIOS does not setup all CPUs. [ 0.183824] mtrr: corrected configuration. [ 0.184563] bio: create slab <bio-0> at 0 [ 0.184668] ACPI: Added _OSI(Module Device) [ 0.184670] ACPI: Added _OSI(Processor Device) [ 0.184672] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.184673] ACPI: Added _OSI(Processor Aggregator Device) [ 0.185495] ACPI: EC: Look up EC in DSDT [ 0.186240] ACPI: Executed 1 blocks of module-level executable AML code [ 0.188095] ACPI: Interpreter enabled [ 0.188099] ACPI: (supports S0 S1 S3 S4 S5) [ 0.188114] ACPI: Using IOAPIC for interrupt routing [ 0.188136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.188847] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.202878] ACPI: No dock devices found. [ 0.202883] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.202943] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.202945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.203223] PCI host bridge to bus 0000:00 [ 0.203227] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.203229] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.203231] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.203233] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.203235] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.203236] pci_bus 0000:00: root bus resource [mem 0xb8000000-0xdfffffff] [ 0.203238] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.203259] pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000 [ 0.203431] pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100 [ 0.203438] pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff] [ 0.203473] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500 [ 0.203483] pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f] [ 0.203502] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f] [ 0.203507] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f] [ 0.203535] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.203548] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000 [ 0.203588] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310 [ 0.203596] pci 0000:00:02.0: reg 10: [mem 0xdffff000-0xdfffffff] [ 0.203628] pci 0000:00:02.0: supports D1 D2 [ 0.203630] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.203641] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320 [ 0.203651] pci 0000:00:02.1: reg 10: [mem 0xdfffec00-0xdfffecff] [ 0.203690] pci 0000:00:02.1: supports D1 D2 [ 0.203692] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.203710] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401 [ 0.203748] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300 [ 0.203758] pci 0000:00:05.0: reg 10: [mem 0xdfff8000-0xdfffbfff] [ 0.203798] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.203816] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a [ 0.203836] pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf] [ 0.203866] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000 [ 0.203875] pci 0000:00:07.0: reg 10: [mem 0xdfffd000-0xdfffdfff] [ 0.203879] pci 0000:00:07.0: reg 14: [io 0xe480-0xe487] [ 0.203911] pci 0000:00:07.0: supports D1 D2 [ 0.203913] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.203928] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185 [ 0.203936] pci 0000:00:08.0: reg 10: [io 0xe400-0xe407] [ 0.203940] pci 0000:00:08.0: reg 14: [io 0xe080-0xe083] [ 0.203943] pci 0000:00:08.0: reg 18: [io 0xe000-0xe007] [ 0.203947] pci 0000:00:08.0: reg 1c: [io 0xdc00-0xdc03] [ 0.203951] pci 0000:00:08.0: reg 20: [io 0xd880-0xd88f] [ 0.203955] pci 0000:00:08.0: reg 24: [mem 0xdfffc000-0xdfffcfff] [ 0.203988] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400 [ 0.204014] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.204027] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400 [ 0.204052] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.204064] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400 [ 0.204089] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.204099] pci 0000:00:0d.0: [10de:03d6] type 00 class 0x030000 [ 0.204105] pci 0000:00:0d.0: reg 10: [mem 0xde000000-0xdeffffff] [ 0.204111] pci 0000:00:0d.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.204115] pci 0000:00:0d.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit] [ 0.204121] pci 0000:00:0d.0: reg 30: [mem 0xdffc0000-0xdffdffff pref] [ 0.204146] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.204162] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.204175] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.204189] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.204205] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.204262] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode) [ 0.204267] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.204269] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.204271] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.204273] pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.204275] pci 0000:00:04.0: bridge window [mem 0xb8000000-0xdfffffff] (subtractive decode) [ 0.204277] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.204296] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.204318] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.204339] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.204366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.204397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.204420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.204443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.204540] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.204660] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c [ 0.204661] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.205349] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.205421] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.205492] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.205562] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.205633] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.205702] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.205770] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.205842] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 0.205914] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 0.205984] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 0.206054] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 0.206126] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 0.206196] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11 [ 0.206267] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.206335] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.206405] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.206473] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 0.206552] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.206647] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.206649] vgaarb: loaded [ 0.206650] vgaarb: bridge control possible 0000:00:0d.0 [ 0.206821] SCSI subsystem initialized [ 0.206823] ACPI: bus type scsi registered [ 0.206863] libata version 3.00 loaded. [ 0.206879] ACPI: bus type usb registered [ 0.206896] usbcore: registered new interface driver usbfs [ 0.206904] usbcore: registered new interface driver hub [ 0.206944] usbcore: registered new device driver usb [ 0.207047] PCI: Using ACPI for IRQ routing [ 0.213114] PCI: pci_cache_line_size set to 64 bytes [ 0.213147] e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff] [ 0.213149] e820: reserve RAM buffer [mem 0xb7fb0000-0xb7ffffff] [ 0.213230] NetLabel: Initializing [ 0.213231] NetLabel: domain hash size = 128 [ 0.213232] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.213242] NetLabel: unlabeled traffic allowed by default [ 0.213292] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.213297] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.213300] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.215396] Switching to clocksource hpet [ 0.220780] AppArmor: AppArmor Filesystem Enabled [ 0.220814] pnp: PnP ACPI init [ 0.220831] ACPI: bus type pnp registered [ 0.220895] pnp 00:00: [dma 4] [ 0.220918] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.220954] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.220972] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.220994] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.221511] pnp 00:04: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff] [ 0.221514] pnp 00:04: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff] [ 0.221569] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.221572] system 00:04: [io 0x0800-0x080f] has been reserved [ 0.221574] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.221576] system 00:04: [io 0x0580-0x05ff] has been reserved [ 0.221578] system 00:04: [io 0x0800-0x087f] could not be reserved [ 0.221580] system 00:04: [io 0x0880-0x08ff] has been reserved [ 0.221582] system 00:04: [io 0x0d00-0x0d7f] has been reserved [ 0.221583] system 00:04: [io 0x0d80-0x0dff] has been reserved [ 0.221586] system 00:04: [io 0x1100-0x117f] has been reserved [ 0.221588] system 00:04: [io 0x1180-0x11ff] has been reserved [ 0.221591] system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.221593] system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.221595] system 00:04: [mem 0x000de000-0x000dffff window] has been reserved [ 0.221597] system 00:04: [mem 0xfec80000-0x1fd93ffff] could not be reserved [ 0.221599] system 00:04: [mem 0xfefe0000-0xfefe01ff] has been reserved [ 0.221601] system 00:04: [mem 0xfefe1000-0xfefe1fff] has been reserved [ 0.221603] system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.221606] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.221673] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.221744] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.221747] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.221749] system 00:06: [mem 0xb8000000-0xbfffffff] has been reserved [ 0.221751] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.221793] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.221937] system 00:08: [io 0x0230-0x023f] has been reserved [ 0.221939] system 00:08: [io 0x0290-0x029f] has been reserved [ 0.221941] system 00:08: [io 0x0a00-0x0a0f] has been reserved [ 0.221943] system 00:08: [io 0x0a10-0x0a1f] has been reserved [ 0.221945] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.222349] pnp 00:09: [dma 0 disabled] [ 0.222395] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.222447] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.222450] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.222574] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.222577] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.222579] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.222581] system 00:0b: [mem 0x00100000-0xb7ffffff] could not be reserved [ 0.222583] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.222585] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.222807] pnp: PnP ACPI: found 12 devices [ 0.222808] ACPI: ACPI bus type pnp unregistered [ 0.229376] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.229384] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.229388] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.229392] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.229402] pci 0000:00:04.0: setting latency timer to 64 [ 0.229408] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.229410] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.229412] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.229413] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.229415] pci_bus 0000:00: resource 8 [mem 0xb8000000-0xdfffffff] [ 0.229417] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.229419] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.229421] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.229423] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.229425] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.229427] pci_bus 0000:01: resource 8 [mem 0xb8000000-0xdfffffff] [ 0.229428] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.229464] NET: Registered protocol family 2 [ 0.229627] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.229860] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.230058] TCP: Hash tables configured (established 32768 bind 32768) [ 0.230110] TCP: reno registered [ 0.230120] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.230151] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.230228] NET: Registered protocol family 1 [ 0.230418] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 0.807465] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.807530] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.807576] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.807630] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.807683] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.807740] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.807800] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.807864] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.807869] pci 0000:00:0d.0: Boot video device [ 0.807879] PCI: CLS 64 bytes, default 64 [ 0.807932] Trying to unpack rootfs image as initramfs... [ 1.053782] Freeing initrd memory: 15776k freed [ 1.059635] PCI-DMA: Disabling AGP. [ 1.062057] PCI-DMA: aperture base @ ac000000 size 65536 KB [ 1.062058] PCI-DMA: using GART IOMMU. [ 1.062061] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.066065] LVT offset 1 assigned for vector 0x400 [ 1.066076] IBS: LVT offset 1 assigned [ 1.066103] perf: AMD IBS detected (0x00000007) [ 1.066248] Initialise module verification [ 1.066285] audit: initializing netlink socket (disabled) [ 1.066297] type=2000 audit(1369829776.960:1): initialized [ 1.090315] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.091792] VFS: Disk quotas dquot_6.5.2 [ 1.091838] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.092300] fuse init (API version 7.20) [ 1.092383] msgmni has been set to 7650 [ 1.092868] Key type asymmetric registered [ 1.092870] Asymmetric key parser 'x509' registered [ 1.092903] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.092933] io scheduler noop registered [ 1.092935] io scheduler deadline registered (default) [ 1.092944] io scheduler cfq registered [ 1.093059] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X [ 1.093122] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X [ 1.093177] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X [ 1.093232] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.093245] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.093356] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.093360] ACPI: Power Button [PWRB] [ 1.093396] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.093398] ACPI: Power Button [PWRF] [ 1.096015] GHES: HEST is not enabled! [ 1.096078] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.116426] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.117801] Linux agpgart interface v0.103 [ 1.119019] brd: module loaded [ 1.119703] loop: module loaded [ 1.120028] libphy: Fixed MDIO Bus: probed [ 1.120078] tun: Universal TUN/TAP device driver, 1.6 [ 1.120080] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 1.120118] PPP generic driver version 2.4.2 [ 1.120159] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.120161] ehci-pci: EHCI PCI platform driver [ 1.120201] ehci-pci 0000:00:02.1: setting latency timer to 64 [ 1.120205] ehci-pci 0000:00:02.1: EHCI Host Controller [ 1.120211] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.120219] ehci-pci 0000:00:02.1: debug port 1 [ 1.120241] ehci-pci 0000:00:02.1: cache line size of 64 is not supported [ 1.120262] ehci-pci 0000:00:02.1: irq 22, io mem 0xdfffec00 [ 1.131292] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.131312] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.131314] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.131318] usb usb1: Product: EHCI Host Controller [ 1.131319] usb usb1: Manufacturer: Linux 3.8.0-22-generic ehci_hcd [ 1.131321] usb usb1: SerialNumber: 0000:00:02.1 [ 1.131418] hub 1-0:1.0: USB hub found [ 1.131422] hub 1-0:1.0: 10 ports detected [ 1.131552] ehci-platform: EHCI generic platform driver [ 1.131558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.131587] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.131589] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.131594] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 1.131618] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdffff000 [ 1.189287] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.189289] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.189291] usb usb2: Product: OHCI Host Controller [ 1.189292] usb usb2: Manufacturer: Linux 3.8.0-22-generic ohci_hcd [ 1.189294] usb usb2: SerialNumber: 0000:00:02.0 [ 1.189363] hub 2-0:1.0: USB hub found [ 1.189367] hub 2-0:1.0: 10 ports detected [ 1.189480] uhci_hcd: USB Universal Host Controller Interface driver [ 1.189532] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.189534] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.189685] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.189776] mousedev: PS/2 mouse device common for all mice [ 1.189895] rtc_cmos 00:01: RTC can wake from S4 [ 1.190035] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.190072] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.190147] device-mapper: uevent: version 1.0.3 [ 1.190199] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-de...@redhat.com [ 1.190205] cpuidle: using governor ladder [ 1.190206] cpuidle: using governor menu [ 1.190209] ledtrig-cpu: registered to indicate activity on CPUs [ 1.190211] EFI Variables Facility v0.08 2004-May-17 [ 1.190392] ashmem: initialized [ 1.190491] TCP: cubic registered [ 1.190576] NET: Registered protocol family 10 [ 1.190730] NET: Registered protocol family 17 [ 1.190746] Key type dns_resolver registered [ 1.190947] Loading module verification certificates [ 1.191943] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 7fb074b2e4851c3043f2f3c12342cb419e9d7cc5' [ 1.191955] registered taskstats version 1 [ 1.194123] Key type trusted registered [ 1.195896] Key type encrypted registered [ 1.197766] rtc_cmos 00:01: setting system clock to 2013-05-29 12:16:18 UTC (1369829778) [ 1.197810] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead. [ 1.198631] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.198634] EDD information not available. [ 1.199909] Freeing unused kernel memory: 996k freed [ 1.200176] Write protecting the kernel read-only data: 12288k [ 1.203193] Freeing unused kernel memory: 1176k freed [ 1.206239] Freeing unused kernel memory: 1080k freed [ 1.206577] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.217329] udevd[95]: starting version 175 [ 1.265766] sata_nv 0000:00:08.0: version 3.5 [ 1.265937] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 1.265988] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.271335] scsi0 : sata_nv [ 1.271662] scsi1 : sata_nv [ 1.271711] ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 21 [ 1.271714] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 21 [ 1.273020] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 1.273953] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.274104] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 1.274121] forcedeth 0000:00:07.0: setting latency timer to 64 [ 1.739233] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.763331] ata1.00: ATA-7: WDC WD1600JS-55MHB0, 02.01C03, max UDMA/133 [ 1.763336] ata1.00: 312581808 sectors, multi 16: LBA48 [ 1.771321] ata1.00: configured for UDMA/133 [ 1.771457] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-55M 02.0 PQ: 0 ANSI: 5 [ 1.771631] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.771663] sd 0:0:0:0: [sda] Write Protect is off [ 1.771665] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.771678] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.771723] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.795871] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:24:8c:dc:12:c6 [ 1.795874] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 1.795915] pata_amd 0000:00:06.0: version 0.4.1 [ 1.795950] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.796173] scsi2 : pata_amd [ 1.796585] scsi3 : pata_amd [ 1.796614] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.796615] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.810749] sda: sda1 sda2 < sda5 > [ 1.811039] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.959528] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22LP20, 1.04, max UDMA/66 [ 1.959537] ata3: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11) [ 1.975458] ata3.00: configured for UDMA/33 [ 2.063159] tsc: Refined TSC clocksource calibration: 2812.791 MHz [ 2.063165] Switching to clocksource tsc [ 2.239162] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.247806] ata2.00: ATA-8: WDC WD3200AAJS-00B4A0, 01.03A01, max UDMA/133 [ 2.247810] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.255786] ata2.00: configured for UDMA/133 [ 2.255884] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 01.0 PQ: 0 ANSI: 5 [ 2.256010] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.256026] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.256044] sd 1:0:0:0: [sdb] Write Protect is off [ 2.256046] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.256060] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.257152] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22LP20 1.04 PQ: 0 ANSI: 5 [ 2.259148] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.259151] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.259232] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.259287] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 2.259408] ata4: port disabled--ignoring [ 2.259962] sdb: sdb1 [ 2.260118] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.362541] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.362545] EXT4-fs (sda1): write access will be enabled during recovery [ 2.467100] usb 2-1: new full-speed USB device number 2 using ohci_hcd [ 2.694086] usb 2-1: New USB device found, idVendor=04a9, idProduct=2206 [ 2.694091] usb 2-1: New USB device strings: Mfr=64, Product=77, SerialNumber=0 [ 2.694094] usb 2-1: Product: CanoScan [ 2.694096] usb 2-1: Manufacturer: Canon [ 2.995227] EXT4-fs (sda1): orphan cleanup on readonly fs [ 2.999031] usb 2-3: new low-speed USB device number 3 using ohci_hcd [ 3.018345] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7477849 [ 3.069568] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 6948639 [ 3.106170] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1967977 [ 3.128506] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5506997 [ 3.131726] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5505924 [ 3.131786] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1967993 [ 3.131811] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 786436 [ 3.133141] EXT4-fs (sda1): 7 orphan inodes deleted [ 3.133142] EXT4-fs (sda1): recovery complete [ 3.214009] usb 2-3: New USB device found, idVendor=045e, idProduct=00cb [ 3.214012] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.214014] usb 2-3: Product: Microsoft Basic Optical Mouse v2.0 [ 3.214015] usb 2-3: Manufacturer: Microsoft [ 3.228056] usbcore: registered new interface driver usbhid [ 3.228059] usbhid: USB HID core driver [ 3.230762] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input3 [ 3.230851] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:02.0-3/input0 [ 3.333645] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.518961] usb 2-4: new full-speed USB device number 4 using ohci_hcd [ 3.728939] usb 2-4: New USB device found, idVendor=03eb, idProduct=3301 [ 3.728942] usb 2-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.728945] usb 2-4: Product: Standard USB Hub [ 3.737944] hub 2-4:1.0: USB hub found [ 3.740934] hub 2-4:1.0: 4 ports detected [ 15.828740] Adding 5239804k swap on /dev/sda5. Priority:-1 extents:1 across:5239804k [ 15.990123] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.049009] udevd[346]: starting version 175 [ 16.440841] type=1400 audit(1369851393.741:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=485 comm="apparmor_parser" [ 16.440889] type=1400 audit(1369851393.741:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=486 comm="apparmor_parser" [ 16.441254] type=1400 audit(1369851393.745:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=485 comm="apparmor_parser" [ 16.441314] type=1400 audit(1369851393.745:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=486 comm="apparmor_parser" [ 16.441462] type=1400 audit(1369851393.745:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=485 comm="apparmor_parser" [ 16.441529] type=1400 audit(1369851393.745:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=486 comm="apparmor_parser" [ 17.162465] Disabling lock debugging due to kernel taint [ 17.227701] MCE: In-kernel MCE decoding enabled. [ 17.249779] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled [ 17.274472] EDAC MC: Ver: 3.0.0 [ 17.339332] microcode: CPU0: patch_level=0x01000095 [ 17.362836] lp: driver loaded but no devices found [ 17.365050] AMD64 EDAC driver v3.4.0 [ 17.365090] EDAC amd64: DRAM ECC disabled. [ 17.365098] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 17.365098] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 17.365098] (Note that use of the override may cause unknown side effects.) [ 17.377488] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 17.377510] i2c i2c-1: nForce2 SMBus adapter at 0x700 [ 17.896244] microcode: CPU1: patch_level=0x01000095 [ 17.896311] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba [ 17.954400] [drm] Initialized drm 1.1.0 20060810 [ 18.249074] wmi: Mapper loaded [ 18.264663] kvm: disabled by bios [ 18.266351] kvm: disabled by bios [ 18.377642] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23 [ 18.377648] hda_intel: Disabling MSI [ 18.377676] snd_hda_intel 0000:00:05.0: setting latency timer to 64 [ 18.897211] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 19.187773] init: failsafe main process (791) killed by TERM signal [ 19.502432] type=1400 audit(1369851396.805:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=848 comm="apparmor_parser" [ 19.502727] type=1400 audit(1369851396.805:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=847 comm="apparmor_parser" [ 19.502859] type=1400 audit(1369851396.805:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=848 comm="apparmor_parser" [ 19.503048] type=1400 audit(1369851396.805:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=847 comm="apparmor_parser" [ 19.876757] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input4 [ 19.876903] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input5 [ 19.876990] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input6 [ 19.877761] nouveau 0000:00:0d.0: setting latency timer to 64 [ 19.877930] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22 [ 19.880774] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2 [ 19.880779] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C) [ 19.880781] nouveau [ DEVICE][0000:00:0d.0] Family : NV40 [ 19.881533] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image... [ 19.920476] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid [ 19.920477] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN [ 19.920600] nouveau [ VBIOS][0000:00:0d.0] BIT signature found [ 19.920602] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.28.00 [ 19.920812] nouveau [ PFB][0000:00:0d.0] RAM type: unknown [ 19.920814] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB [ 19.920815] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags [ 19.946773] [TTM] Zone kernel: Available graphics memory: 1960160 kiB [ 19.946775] [TTM] Initializing pool allocator [ 19.946779] [TTM] Initializing DMA pool allocator [ 19.947787] nouveau [ DRM] VRAM: 125 MiB [ 19.947792] nouveau [ DRM] GART: 512 MiB [ 19.947796] nouveau [ DRM] BIT BIOS found [ 19.947799] nouveau [ DRM] Bios version 05.61.32.28 [ 19.947801] nouveau [ DRM] TMDS table version 1.1 [ 19.947803] nouveau [ DRM] DCB version 3.0 [ 19.947805] nouveau [ DRM] DCB outp 00: 01000310 00000023 [ 19.947807] nouveau [ DRM] DCB outp 01: 00110204 942b0003 [ 19.947809] nouveau [ DRM] DCB conn 00: 0000 [ 19.947811] nouveau [ DRM] DCB conn 01: 1131 [ 19.947812] nouveau [ DRM] DCB conn 02: 0110 [ 19.947813] nouveau [ DRM] DCB conn 03: 0111 [ 19.947815] nouveau [ DRM] DCB conn 04: 0113 [ 19.948095] nouveau W[ DRM] DCB type 4 not known [ 19.948098] nouveau W[ DRM] Unknown-1 has no encoders, removing [ 19.949394] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 19.949395] [drm] No driver support for vblank timestamp query. [ 19.950329] nouveau [ DRM] 1 available performance level(s) [ 19.950333] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100% [ 19.950334] nouveau [ DRM] c: [ 19.951582] nouveau [ DRM] MM: using M2MF for buffer copies [ 20.000743] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ffff880129a62400 [ 20.000810] fbcon: nouveaufb (fb0) is primary device [ 20.025712] Bluetooth: Core ver 2.16 [ 20.025734] NET: Registered protocol family 31 [ 20.025734] Bluetooth: HCI device and connection manager initialized [ 20.025929] Bluetooth: HCI socket layer initialized [ 20.025930] Bluetooth: L2CAP socket layer initialized [ 20.025935] Bluetooth: SCO socket layer initialized [ 20.066987] Console: switching to colour frame buffer device 160x64 [ 20.069278] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device [ 20.069283] nouveau 0000:00:0d.0: registered panic notifier [ 20.069289] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0 [ 20.215635] Bluetooth: RFCOMM TTY layer initialized [ 20.215650] Bluetooth: RFCOMM socket layer initialized [ 20.215652] Bluetooth: RFCOMM ver 1.11 [ 20.232133] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.232136] Bluetooth: BNEP filters: protocol multicast [ 20.232144] Bluetooth: BNEP socket layer initialized *********************** Ending of second dmesg file ***************************** ... [ 19.398851] Bluetooth: BNEP socket layer initialized [ 19.422445] [TTM] Zone kernel: Available graphics memory: 1960160 kiB [ 19.422446] [TTM] Initializing pool allocator [ 19.422451] [TTM] Initializing DMA pool allocator [ 19.423455] nouveau [ DRM] VRAM: 125 MiB [ 19.423460] nouveau [ DRM] GART: 512 MiB [ 19.423464] nouveau [ DRM] BIT BIOS found [ 19.423469] nouveau [ DRM] Bios version 05.61.32.28 [ 19.423472] nouveau [ DRM] TMDS table version 1.1 [ 19.423473] nouveau [ DRM] DCB version 3.0 [ 19.423476] nouveau [ DRM] DCB outp 00: 01000310 00000023 [ 19.423478] nouveau [ DRM] DCB outp 01: 00110204 942b0003 [ 19.423479] nouveau [ DRM] DCB conn 00: 0000 [ 19.423482] nouveau [ DRM] DCB conn 01: 1131 [ 19.423483] nouveau [ DRM] DCB conn 02: 0110 [ 19.423484] nouveau [ DRM] DCB conn 03: 0111 [ 19.423486] nouveau [ DRM] DCB conn 04: 0113 [ 19.423774] nouveau W[ DRM] DCB type 4 not known [ 19.423777] nouveau W[ DRM] Unknown-1 has no encoders, removing [ 19.425088] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 19.425089] [drm] No driver support for vblank timestamp query. [ 19.426024] nouveau [ DRM] 1 available performance level(s) [ 19.426027] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100% [ 19.426029] nouveau [ DRM] c: [ 19.427281] nouveau [ DRM] MM: using M2MF for buffer copies [ 19.476451] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ffff88012a104800 [ 19.476513] fbcon: nouveaufb (fb0) is primary device [ 19.539025] Console: switching to colour frame buffer device 160x64 [ 19.541305] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device [ 19.541307] nouveau 0000:00:0d.0: registered panic notifier [ 19.541312] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0 [ 19.668550] init: avahi-cups-reload main process (965) terminated with status 1 [ 19.875840] ppdev: user-space parallel port driver *********************** Ending of third and last dmesg file ***************************** ... [ 20.121503] Bluetooth: BNEP socket layer initialized [ 20.449899] init: avahi-cups-reload main process (994) terminated with status 1 ******************************************************************************* Thanks, Greg. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1176062 Title: System crashes when starting Firefox and/or Thunderbird To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1176062/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs