Public bug reported: This bug report applies to both, Ubuntu 13.10 with the Kernel 3.11.0-15 Generic Kernel and after upgrading to the Development version of the 14.04 with the 3.13.0-5 Generic Kernel.
cyrex@cyrex:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 Codename: trusty NOTE: Again, this also applies to 13.10. The package that might be related to this is acpid with version 2.0.18 I was previously using the Intel DP35DP motherboard with no errors on both versions (13.10 and 14.04) After testing the Asus Z87-PRO I started having this errors. I quickly searched for a Firmware upgrade. I applied the Z87-PRO BIOS 1707 firmware update but still the errors were there. The visible impact is: + Slow reading/writing to any Disks (I have an SSD and 2 HDD). All are very slow to the point of copying 1 MB takes about 2 minutes. + Downloading from either the integrated Wireless card or the Wired Card is very slow. My connection was normal between 500KB/Sec to 1MB/Sec. It now holds steady at around 23KB/Sec. +Booting has no slow problems, the only issues is the visible graphic glyphs that appear before entering the Desktop (Using an Nvidia 440 card). Here is the motherboard: http://www.asus.com/Motherboards/Z87PRO/#specifications I read through several bug reports similar and found that applying the processor.nocst=1 parameter to the kernel would solve this. It did not, it actually added another error: microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x7 [ 3.111908] platform microcode: Direct firmware load failed with error -2 [ 3.111909] platform microcode: Falling back to user helper [ 3.115058] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x7 [ 3.115068] platform microcode: Direct firmware load failed with error -2 [ 3.115070] platform microcode: Falling back to user helper [ 3.115742] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x7 [ 3.115751] platform microcode: Direct firmware load failed with error -2 [ 3.115754] platform microcode: Falling back to user helper [ 3.116061] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x7 [ 3.116069] platform microcode: Direct firmware load failed with error -2 [ 3.116071] platform microcode: Falling back to user helper [ 3.116391] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x7 [ 3.116401] platform microcode: Direct firmware load failed with error -2 [ 3.116407] platform microcode: Falling back to user helper [ 3.116730] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x7 [ 3.116744] platform microcode: Direct firmware load failed with error -2 [ 3.116747] platform microcode: Falling back to user helper My current dmesg looks like the file I have uploaded. The ACPI lines shown are: cyrex@cyrex:~$ dmesg | grep ACPI [ 0.000000] BIOS-e820: [mem 0x00000000ca8bf000-0x00000000ca8c5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dd98a000-0x00000000dd9a2fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dd9a3000-0x00000000ddee1fff] ACPI NVS [ 0.000000] ACPI: RSDP 000f0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT dd98f080 000074 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP dd99da68 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT dd98f188 00E8DB (v02 ALASKA A M I 00000031 INTL 20091112) [ 0.000000] ACPI: FACS ddee0080 000040 [ 0.000000] ACPI: APIC dd99db78 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT dd99dc10 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: LPIT dd99dc58 00005C (v01 ALASKA A M I 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT dd99dcb8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112) [ 0.000000] ACPI: SSDT dd99e1f8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112) [ 0.000000] ACPI: MCFG dd99ecd0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET dd99ed10 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT dd99ed48 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT dd99f0b8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.003538] ACPI: Core revision 20131115 [ 0.008908] ACPI: All ACPI Tables successfully acquired [ 0.182573] PM: Registering ACPI NVS region [mem 0xca8bf000-0xca8c5fff] (28672 bytes) [ 0.182639] PM: Registering ACPI NVS region [mem 0xdd9a3000-0xddee1fff] (5500928 bytes) [ 0.183736] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.183802] ACPI: bus type PCI registered [ 0.183849] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.184924] ACPI: Added _OSI(Module Device) [ 0.184971] ACPI: Added _OSI(Processor Device) [ 0.185018] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.185065] ACPI: Added _OSI(Processor Aggregator Device) [ 0.188315] ACPI: Executed 1 blocks of module-level executable AML code [ 0.190266] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.202104] ACPI: SSDT dd980c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112) [ 0.202606] ACPI: Dynamic OEM Table Load: [ 0.202706] ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112) [ 0.214179] ACPI: SSDT dd980618 0005AA (v01 PmRef ApIst 00003000 INTL 20091112) [ 0.214723] ACPI: Dynamic OEM Table Load: [ 0.214823] ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20091112) [ 0.226082] ACPI: SSDT dd97fd98 000119 (v01 PmRef ApCst 00003000 INTL 20091112) [ 0.226583] ACPI: Dynamic OEM Table Load: [ 0.226682] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20091112) [ 0.238753] ACPI: Interpreter enabled [ 0.238806] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.238929] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.239059] ACPI: (supports S0 S3 S4 S5) [ 0.239105] ACPI: Using IOAPIC for interrupt routing [ 0.239169] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.239364] ACPI: No dock devices found. [ 0.244287] ACPI: Power Resource [FN00] (off) [ 0.244380] ACPI: Power Resource [FN01] (off) [ 0.244471] ACPI: Power Resource [FN02] (off) [ 0.244560] ACPI: Power Resource [FN03] (off) [ 0.244651] ACPI: Power Resource [FN04] (off) [ 0.245302] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.246816] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.246997] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.247297] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.247502] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.247669] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.247821] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.247972] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.248127] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.248335] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.248834] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.254438] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.262279] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.270636] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.271036] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.271433] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.271828] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.272224] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.272619] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.273014] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.273409] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.274068] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.274172] ACPI: \_SB_.PCI0: notify handler is installed [ 0.274614] ACPI: bus type USB registered [ 0.274890] PCI: Using ACPI for IRQ routing [ 0.283912] pnp: PnP ACPI init [ 0.283961] ACPI: bus type PNP registered [ 0.284101] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.284115] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.284126] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.284175] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.284200] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.284761] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.284775] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.284849] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.284944] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.285019] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.285892] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.286027] pnp: PnP ACPI: found 11 devices [ 0.286074] ACPI: bus type PNP unregistered [ 0.286122] PnPBIOS: Disabled by ACPI PNP [ 0.587809] ACPI: Power Button [PWRB] [ 0.587939] ACPI: Power Button [PWRF] [ 0.588016] ACPI: Fan [FAN0] (off) [ 0.588074] ACPI: Fan [FAN1] (off) [ 0.588131] ACPI: Fan [FAN2] (off) [ 0.588188] ACPI: Fan [FAN3] (off) [ 0.588245] ACPI: Fan [FAN4] (off) [ 0.588599] ACPI: Thermal Zone [TZ00] (28 C) [ 0.588819] ACPI: Thermal Zone [TZ01] (30 C) [ 1.348741] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 1.348890] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node f743df60), AE_NOT_FOUND (20131115/psparse-536) [ 1.353378] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 1.353527] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node f743dfa8), AE_NOT_FOUND (20131115/psparse-536) [ 1.354919] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 1.355068] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node f743df60), AE_NOT_FOUND (20131115/psparse-536) [ 1.363371] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 1.363520] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node f743dfa8), AE_NOT_FOUND (20131115/psparse-536) [ 2.955625] ACPI Warning: 0x00001828-0x0000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 2.955631] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.955634] ACPI Warning: 0x00001c30-0x00001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251) [ 2.955637] ACPI Warning: 0x00001c30-0x00001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251) [ 2.955639] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.955642] ACPI Warning: 0x00001c00-0x00001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251) [ 2.955644] ACPI Warning: 0x00001c00-0x00001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251) [ 2.955647] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.096611] asus_wmi: Disabling ACPI video driver My worries are in the following messages: ACPI Warning: 0x00001828-0x0000182f SystemIO conflicts with Region XXXX ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node f743dfa8).... PnPBIOS: Disabled by ACPI PNP pci 0000:00:01.0: System wakeup disabled by ACPI ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) Apart from the bug, how can I interpret this warning, messages and errors? Thank you. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: acpi (not installed) ProcVersionSignature: Ubuntu 3.13.0-5.20-generic 3.13.0 Uname: Linux 3.13.0-5-generic i686 NonfreeKernelModules: nvidia ApportVersion: 2.13.1-0ubuntu1 Architecture: i386 Date: Thu Jan 23 09:36:27 2014 SourcePackage: acpi UpgradeStatus: Upgraded to trusty on 2014-01-23 (0 days ago) ** Affects: acpi (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 trusty ** Attachment added: "Dmesg Log" https://bugs.launchpad.net/bugs/1271978/+attachment/3955176/+files/dmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1271978 Title: Multiple ACPI Errors when using an Asus Z87-Pro To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/acpi/+bug/1271978/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
