Here's an example of my /var/log/messages from the incident. The key error is: Aug 19 08:16:47 localhost kernel: [15183.828000] Error taking CPU1 up: -5
Aug 18 22:21:03 localhost dhcdbd: Unrequested down ?:3 Aug 18 22:21:07 localhost kernel: [15173.236000] ACPI: PCI interrupt for device 0000:03:00.0 disabled Aug 19 08:16:47 localhost kernel: [15175.160000] Stopping tasks ... done. Aug 19 08:16:47 localhost kernel: [15175.332000] Suspending console(s) Aug 19 08:16:47 localhost kernel: [15175.372000] sd 0:0:0:0: [sda] Synchronizing SCSI cache Aug 19 08:16:47 localhost kernel: [15175.608000] sd 0:0:0:0: [sda] Stopping disk Aug 19 08:16:47 localhost kernel: [15178.148000] ACPI: PCI interrupt for device 0000:03:01.1 disabled Aug 19 08:16:47 localhost kernel: [15178.184000] NVRM: RmPowerManagement: 3 Aug 19 08:16:47 localhost kernel: [15178.392000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled Aug 19 08:16:47 localhost kernel: [15178.408000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled Aug 19 08:16:47 localhost kernel: [15178.424000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled Aug 19 08:16:47 localhost kernel: [15178.424000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled Aug 19 08:16:47 localhost kernel: [15178.424000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled Aug 19 08:16:47 localhost kernel: [15178.424000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled Aug 19 08:16:47 localhost kernel: [15178.616000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled Aug 19 08:16:47 localhost kernel: [15178.636000] Disabling non-boot CPUs ... Aug 19 08:16:47 localhost kernel: [15178.752000] CPU 1 is now offline Aug 19 08:16:47 localhost kernel: [15178.752000] SMP alternatives: switching to UP code Aug 19 08:16:47 localhost kernel: [15178.752000] CPU1 is down Aug 19 08:16:47 localhost kernel: [15178.752000] Enabling non-boot CPUs ... Aug 19 08:16:47 localhost kernel: [15178.764000] SMP alternatives: switching to SMP code Aug 19 08:16:47 localhost kernel: [15178.764000] Booting processor 1/1 eip 3000 Aug 19 08:16:47 localhost kernel: [15178.772000] Initializing CPU#1 Aug 19 08:16:47 localhost kernel: [15178.772000] c01fd3cb Aug 19 08:16:47 localhost kernel: [15178.772000] Modules linked in: hci_usb battery ac thermal fan button snd_rtctimer binfmt_misc rfcomm l2cap bluetooth ppdev acpi_cpufreq cpufre q_stats cpufreq_powersave cpufreq_conservative cpufreq_ondemand freq_table cpufreq_userspace sbs dock video container ipv6 sbp2 parport_pc lp parport fuse hsfhda(F) hsfserial hsfe ngine(P) hsfosspec snd_hda_intel snd_hda_codec snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_de vice snd nvidia(P) sdhci iTCO_wdt iTCO_vendor_support xpad mmc_core serio_raw soundcore i2c_core af_packet psmouse pcspkr intel_agp snd_page_alloc agpgart shpchp pci_hotplug joyde v evdev xt_tcpudp nf_conntrack_ipv4 xt_state ipt_REJECT xt_limit ipt_LOG nf_conntrack_ftp nf_conntrack nfnetlink iptable_filter ip_tables x_tables ext3 jbd mbcache sha256 aes_i586 cbc blkcipher usbhid hid sg sd_mod sr_mod cdrom ata_generic ohci1394 ieee1394 uhci_hcd ata_piix libata scsi_mod ehci_hcd usbcore dm_c Aug 19 08:16:47 localhost kernel: ypt dm_mod processor capability commoncap Aug 19 08:16:47 localhost kernel: [15183.828000] Stuck ?? Aug 19 08:16:47 localhost kernel: [15183.828000] Inquiring remote APIC #1... Aug 19 08:16:47 localhost kernel: [15183.828000] ... APIC #1 ID: failed Aug 19 08:16:47 localhost kernel: [15183.828000] ... APIC #1 VERSION: failed Aug 19 08:16:47 localhost kernel: [15183.828000] ... APIC #1 SPIV: failed Aug 19 08:16:47 localhost kernel: [15183.828000] Error taking CPU1 up: -5 Aug 19 08:16:47 localhost kernel: [15183.852000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 Aug 19 08:16:47 localhost kernel: [15184.340000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18 Aug 19 08:16:47 localhost kernel: [15184.340000] usb usb2: root hub lost power or was reset Aug 19 08:16:47 localhost kernel: [15184.340000] PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) Aug 19 08:16:47 localhost kernel: [15184.340000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 Aug 19 08:16:47 localhost kernel: [15184.340000] usb usb3: root hub lost power or was reset Aug 19 08:16:47 localhost kernel: [15184.340000] PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) Aug 19 08:16:47 localhost kernel: [15184.340000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 Aug 19 08:16:47 localhost kernel: [15184.340000] usb usb4: root hub lost power or was reset Aug 19 08:16:47 localhost kernel: [15184.340000] PCI: Enabling device 0000:00:1d.3 (0000 -> 0001) Aug 19 08:16:47 localhost kernel: [15184.340000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 Aug 19 08:16:47 localhost kernel: [15184.340000] usb usb5: root hub lost power or was reset Aug 19 08:16:47 localhost kernel: [15184.356000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18 Aug 19 08:16:47 localhost kernel: [15184.372000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 19 Aug 19 08:16:47 localhost kernel: [15184.372000] NVRM: RmPowerManagement: 4 Aug 19 08:16:47 localhost kernel: [15184.624000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[ecbfd800-ecbfdfff] Max Packet=[2048] IR/IT contexts=[4/4] Aug 19 08:16:47 localhost kernel: [15184.628000] ata1.00: configured for UDMA/133 Aug 19 08:16:47 localhost kernel: [15184.628000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) Aug 19 08:16:47 localhost kernel: [15184.628000] sd 0:0:0:0: [sda] Write Protect is off Aug 19 08:16:47 localhost kernel: [15184.628000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 19 08:16:47 localhost kernel: [15184.644000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23 Aug 19 08:16:47 localhost kernel: [15184.904000] ata2.00: configured for UDMA/33 Aug 19 08:16:47 localhost kernel: [15185.424000] sd 0:0:0:0: [sda] Starting disk Aug 19 08:16:47 localhost kernel: [15185.604000] Restarting tasks ... <6>usb 3-1: USB disconnect, address 3 Aug 19 08:16:47 localhost kernel: [15185.768000] usb 4-1: USB disconnect, address 3 Aug 19 08:16:47 localhost kernel: [15185.772000] done. Aug 19 08:16:47 localhost kernel: [15186.332000] b44.c:v1.01 (Jun 16, 2006) Aug 19 08:16:47 localhost kernel: [15186.332000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 19 Aug 19 08:16:47 localhost kernel: [15186.340000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:c5:5c:54 Aug 19 08:16:47 localhost kernel: [15186.408000] ADDRCONF(NETDEV_UP): eth0: link is not ready Aug 19 08:16:47 localhost kernel: [15186.744000] usb 3-1: new low speed USB device using uhci_hcd and address 4 Aug 19 08:16:48 localhost kernel: [15186.916000] usb 3-1: configuration #1 chosen from 1 choice Aug 19 08:16:48 localhost kernel: [15186.932000] input: Logitech Optical USB Mouse as /class/input/input18 Aug 19 08:16:48 localhost kernel: [15186.932000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1 Aug 19 08:16:48 localhost kernel: [15187.172000] usb 4-1: new low speed USB device using uhci_hcd and address 4 Aug 19 08:16:48 localhost kernel: [15187.328000] usb 4-1: configuration #1 chosen from 1 choice Aug 19 08:16:48 localhost kernel: [15187.344000] input: HID 1267:0103 as /class/input/input19 Aug 19 08:16:48 localhost kernel: [15187.344000] input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.2-1 Aug 19 08:16:48 localhost kernel: [15187.364000] input: HID 1267:0103 as /class/input/input20 Aug 19 08:16:48 localhost kernel: [15187.364000] input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.2-1 Aug 19 08:16:48 localhost kernel: [15187.604000] usb 5-2: new full speed USB device using uhci_hcd and address 6 Aug 19 08:16:49 localhost kernel: [15187.784000] usb 5-2: configuration #1 chosen from 1 choice Aug 19 08:16:49 localhost kernel: [15187.788000] hub 5-2:1.0: USB hub found Aug 19 08:16:49 localhost kernel: [15187.788000] hub 5-2:1.0: 3 ports detected Aug 19 08:16:49 localhost kernel: [15188.100000] usb 5-2.1: new full speed USB device using uhci_hcd and address 7 Aug 19 08:16:49 localhost kernel: [15188.232000] usb 5-2.1: configuration #1 chosen from 1 choice Aug 19 08:16:49 localhost kernel: [15188.520000] usb 5-2.2: new full speed USB device using uhci_hcd and address 8 Aug 19 08:16:49 localhost kernel: [15188.648000] usb 5-2.2: configuration #1 chosen from 1 choice Aug 19 08:16:49 localhost kernel: [15188.656000] input: Broadcom Corp as /class/input/input21 Aug 19 08:16:49 localhost kernel: [15188.656000] input: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.3-2.2 Aug 19 08:16:49 localhost kernel: [15188.856000] usb 5-2.3: new full speed USB device using uhci_hcd and address 9 Aug 19 08:16:49 localhost kernel: [15188.868000] input: Lid Switch as /class/input/input22 Aug 19 08:16:49 localhost kernel: [15188.868000] ACPI: Lid Switch [LID] Aug 19 08:16:49 localhost kernel: [15188.868000] input: Power Button (CM) as /class/input/input23 Aug 19 08:16:49 localhost kernel: [15188.868000] ACPI: Power Button (CM) [PBTN] Aug 19 08:16:49 localhost kernel: [15188.868000] input: Sleep Button (CM) as /class/input/input24 Aug 19 08:16:49 localhost kernel: [15188.868000] ACPI: Sleep Button (CM) [SBTN] Aug 19 08:16:49 localhost kernel: [15188.888000] ACPI: Thermal Zone [THM] (34 C) Aug 19 08:16:49 localhost kernel: [15188.924000] ACPI: AC Adapter [AC] (on-line) Aug 19 08:16:49 localhost kernel: [15188.952000] ACPI: Battery Slot [BAT0] (battery present) Aug 19 08:16:50 localhost kernel: [15189.000000] usb 5-2.3: configuration #1 chosen from 1 choice Aug 19 08:16:50 localhost kernel: [15189.008000] input: Broadcom Corp as /class/input/input25 Aug 19 08:16:50 localhost kernel: [15189.008000] input: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.3-2.3 Aug 19 08:16:50 localhost kernel: [15189.404000] b44: eth0: Link is up at 100 Mbps, full duplex. Aug 19 08:16:50 localhost kernel: [15189.404000] b44: eth0: Flow control is off for TX and off for RX. Aug 19 08:16:50 localhost kernel: [15189.404000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Aug 19 08:16:51 localhost kernel: [15190.372000] usb 5-2: USB disconnect, address 6 Aug 19 08:16:51 localhost kernel: [15190.372000] usb 5-2.1: USB disconnect, address 7 Aug 19 08:16:51 localhost kernel: [15190.624000] usb 5-2.2: USB disconnect, address 8 Aug 19 08:16:51 localhost kernel: [15190.624000] usb 5-2.3: USB disconnect, address 9 -- Only one CPU core active after resume from suspend to ram on Core2 Duo https://bugs.launchpad.net/bugs/133530 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
