Public bug reported: Description: Ubuntu 13.10 Release: 13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10)
On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb 0000:05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb 0000:06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport 0000:00:1c.4: device [8086:8c18] error status/mask=00000001/00002000 [ 41.942261] pcieport 0000:00:1c.4: [ 0] Receiver Error (First) [ 538.342279] pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4 [ 538.342306] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 538.342763] pcieport 0000:00:1c.4: device [8086:8c18] error status/mask=00000001/00002000 [ 538.343127] pcieport 0000:00:1c.4: [ 0] Receiver Error (First) These are new Supermicro X10SL7-F motherboards with new HP NC375T in the PCIE x8 (in x4) port. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Attachment added: "lspci-vnvn.log" https://bugs.launchpad.net/bugs/1279699/+attachment/3979418/+files/lspci-vnvn.log ** Summary changed: - AER: Corrected error received: id=00e4 + AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1279699 Title: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279699/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs