** Description changed:

  The bug is present already at boot (even from a USB stick boot without
  installing) in all Ubuntu (and variants) relying on Linux kernels 3.10
- to 3.12.
+ to 3.12 (-> still present in 3.13).
  
  Because it's so easy to boot via USB, I tried it on 7 computers (all of
  them Dell Optiplex 9010). The upshot is that old distros boot correctly,
  with working displays. The new 13.10 distros doesn't work (i.e. the
  display is distorted) on 3 computers.
  
  On my computer (which is one of the 3 malfunctioning), recovery mode
  also always display correctly.  Playing around with xrandr and the
  xorg.conf turoned out to be of no avail. I tried changing the Linux
  kernels (after indications from this Ubuntu forums thread:
  http://ubuntuforums.org/showthread.php?t=2186873  ). It turns out that
  kernels of version <= 3.9 are OK. Kernels  >= 3.10.19 are not OK. I'm
  willing to bisect in the 3.10.x range if deemed of interest.
  
  I kept the lshw, lspci, xdpyinfo, ddcprobe and Xorg.0.log of all these 7
  boots from USB stick. I put all those log files in a zip file availiable
  at  http://dfiles.eu/files/njfpo8b4k
  
  Here are the main differences I found in those files (except the
  Xorg.0.log which are not so handy to compare as the beginning of lines
  are always different).
  
  I guess that the most telling is the following line from ddcprobe. For
  non-correctly-displaying computers: dtiming: 1920x1080@68
  
  For correctly-displaying computers:  dtiming: 1920x1080@60
  
  For the record, there is no other ctiming or dtiming line in the output
  of ddcprobe.
  
  The configuration are otherwise strikingly similar. The other
  differences which seemed of significance (i.e. not mentionning hard
  drives partitions and serial numbers) is that uncorrectly working
  computers have the following extra line in lspci
  
  00:16.3 Serial controller: Intel Corporation 7 Series/C210 Series
  Chipset Family KT Controller (rev 04)
  
  Correspondingly, the lshw of these computers have the following extra
  section:
  
-         *-communication:1
-              description: Serial controller
-              product: 7 Series/C210 Series Chipset Family KT Controller
-              vendor: Intel Corporation
-              physical id: 16.3
-              bus info: pci@0000:00:16.3
-              version: 04
-              width: 32 bits
-              clock: 66MHz
-              capabilities: pm msi 16550 bus_master cap_list
-              configuration: driver=serial latency=0
-              resources: irq:19 ioport:f0e0(size=8) memory:f7d3a000-f7d3afff
+         *-communication:1
+              description: Serial controller
+              product: 7 Series/C210 Series Chipset Family KT Controller
+              vendor: Intel Corporation
+              physical id: 16.3
+              bus info: pci@0000:00:16.3
+              version: 04
+              width: 32 bits
+              clock: 66MHz
+              capabilities: pm msi 16550 bus_master cap_list
+              configuration: driver=serial latency=0
+              resources: irq:19 ioport:f0e0(size=8) memory:f7d3a000-f7d3afff
  
  Lastly, in the *-pci section. Also, the *-memory *-bank:n (for n an
  integer) are not of the same vendor (Samsung or Nanya technologies for
  correctly-displaying computers and Hynix/Hyundai for non-correctly-
  displaying ones).
  
  The visual distortion is roughly as follows: every line gets
  horizontally enlarged by a factor t. This factor varies with time and
  with the height of the line to make nice sine curves out of straight
  vertical lines. Actually there is a phase difference between even and
  odd lines. The leftmost part of the screen remains legible as the
  distortion effect is smaller there but the rightmost part is impossible
  to read. A straight vertical line looks like sine wave, the time
  frequency of this wave varies with time, the amplitude is always
  increasing linearly as one moves to the right of the screen. See also
  the first post in http://ubuntuforums.org/showthread.php?t=2186040
  
  Do not hesitate to contact me if further testing is of interest.
  
  Cheers,
  
  X.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1251580

Title:
  Display is heavily distorted after kernel upgrades

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-saucy/+bug/1251580/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to