What is saying to me this command? $ dmesg | tail -50 [ 917.124303] cfg80211: Calling CRDA to update world regulatory domain [ 917.217462] ene_ir 00:09: System wakeup enabled by ACPI [ 917.217487] i8042 aux 00:08: System wakeup disabled by ACPI [ 917.217503] i8042 kbd 00:07: System wakeup enabled by ACPI [ 917.512770] ahci 0000:00:1f.2: BIOS update required for suspend/resume [ 917.512789] pci_legacy_suspend(): ahci_pci_device_suspend+0x0/0x80 [ahci] returns -5 [ 917.512794] dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -5 [ 917.512796] PM: Device 0000:00:1f.2 failed to suspend async: error -5 [ 917.676130] PM: Some devices failed to suspend, or early wake event detected [ 917.676504] usb usb3: root hub lost power or was reset [ 917.676714] usb usb4: root hub lost power or was reset [ 917.677175] usb usb5: root hub lost power or was reset [ 917.677383] usb usb6: root hub lost power or was reset [ 917.677557] usb usb7: root hub lost power or was reset [ 917.677730] usb usb8: root hub lost power or was reset [ 917.692322] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 917.738071] r8169 0000:03:00.0 eth0: link down [ 917.889756] i8042 kbd 00:07: System wakeup disabled by ACPI [ 917.889765] ene_ir 00:09: System wakeup disabled by ACPI [ 918.008054] ata5: SATA link down (SStatus 0 SControl 300) [ 918.016043] ata6: SATA link down (SStatus 0 SControl 300) [ 918.156087] usb 4-2: reset low-speed USB device number 2 using uhci_hcd [ 918.176049] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 918.178952] ata1.00: configured for UDMA/100 [ 918.192048] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 918.192074] sd 0:0:0:0: [sda] Starting disk [ 918.219766] ata2.00: configured for UDMA/100 [ 919.291117] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 919.294052] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 919.319622] PM: resume of devices complete after 1643.487 msecs [ 919.320125] PM: Finishing wakeup. [ 919.320126] Restarting tasks ... done. [ 919.326239] video LNXVIDEO:00: Restoring backlight state [ 919.331716] cfg80211: World regulatory domain updated: [ 919.331723] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 919.331726] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 919.331728] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 919.331730] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 919.331733] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 919.331735] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 922.535073] wlan0: authenticate with a4:7a:a4:84:62:56 [ 922.535937] wlan0: send auth to a4:7a:a4:84:62:56 (try 1/3) [ 922.539136] wlan0: authenticated [ 922.539553] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 922.540980] wlan0: associate with a4:7a:a4:84:62:56 (try 1/3) [ 922.545427] wlan0: RX AssocResp from a4:7a:a4:84:62:56 (capab=0x411 status=0 aid=5) [ 922.550785] wlan0: associated [ 929.832819] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 929.835191] sd 6:0:0:0: [sdb] Asking for cache data failed [ 929.835195] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Maybe this can be helpfull to solve my problem...i really dont understand too much but this line "Some devices failed to suspend, or early wake event detected" i think might be the problem -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1326739 Title: [ubunutu 14.04] hp-dv5 resume instantly from suspend mode To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pm-utils/+bug/1326739/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
