apport information
** Tags added: apport-collected trusty
** Description changed:
This bug has been around for a while. I have seen it in the forums circa
2007, and I have provided a solution in 2009. Since the modified code
never found its way into the mainstream kernels, I am issuing the fix as
a bug report.
The bug concerns the Soundblaster Audigy cards with the emu10k1 chip in
both i386 and amd64 architectures, in any kernel (standard, RT etc).
They have on-board joystick MIDI. There is an optional front-panel
module, which provides its own MIDI UART. Under Linux, the front MIDI
does not work. People with dual-boot systems have reported that booting
Windows first, then rebooting into Linux makes the UART function
properly.
The cause for the bug lies in the fact that the front panel MIDI is
routed through a microcontroller (resides in the front panel module),
and this microcontroller needs a defined reset signal once after power-
up. Up to this point, the GPIO _levels_ are initialized correctly, but
the reset _pulse_ is never issued. Essentially, the emu10k1 chip's GPIO2
needs to be pulled high for a brief interval.
The bug can be fixed in the file linux-
source-3.13.0/sound/pci/emu10k1/emumpu401.c in the function
snd_emu10k1_audigy_midi(). The proposed patch follows right after the
present initialization of the second UART (note the added variable "val"
to store the GPIO bits):
int snd_emu10k1_audigy_midi(struct snd_emu10k1 *emu)
{
struct snd_emu10k1_midi *midi;
int err;
unsigned int val; /* Needed in GPOUT2 pulse initialization */
midi = &emu->midi;
if ((err = emu10k1_midi_init(emu, midi, 0, "Audigy MPU-401 (UART)")) < 0)
return err;
midi->tx_enable = INTE_MIDITXENABLE;
midi->rx_enable = INTE_MIDIRXENABLE;
midi->port = A_MUDATA1;
midi->ipr_tx = IPR_MIDITRANSBUFEMPTY;
midi->ipr_rx = IPR_MIDIRECVBUFEMPTY;
midi->interrupt = snd_emu10k1_midi_interrupt;
midi = &emu->midi2;
if ((err = emu10k1_midi_init(emu, midi, 1, "Audigy MPU-401 #2")) < 0)
return err;
midi->tx_enable = INTE_A_MIDITXENABLE2;
midi->rx_enable = INTE_A_MIDIRXENABLE2;
midi->port = A_MUDATA2;
midi->ipr_tx = IPR_A_MIDITRANSBUFEMPTY2;
midi->ipr_rx = IPR_A_MIDIRECVBUFEMPTY2;
midi->interrupt = snd_emu10k1_midi_interrupt2;
/*** NEW CODE *** Pulse reset line for the second UART */
val = inl(emu->port + A_IOCFG);
outl (val | A_IOCFG_GPOUT2, emu->port + A_IOCFG);
udelay(10); /* udelay is a bad kludge, but remember that this is
called only once on startup */
outl (val, emu->port + A_IOCFG);
return 0;
}
I suspect that my use of udelay would make a real kernel hacker cringe,
but the level of GPOUT2 needs to remain high for a few microseconds to
provide a stable RESET signal.
- Anyway, this fixes the problem. I have applied the patch for pretty much
- every major upgrade of the kernel. It is sufficient to compile the
- module snd-emu10k1.ko and replace it in the module tree.
+ Anyway, this fixes the problem. I have applied the patch for pretty much
every major upgrade of the kernel. It is sufficient to compile the module
snd-emu10k1.ko and replace it in the module tree.
+ ---
+ ApportVersion: 2.14.1-0ubuntu3.2
+ Architecture: amd64
+ AudioDevicesInUse:
+ USER PID ACCESS COMMAND
+ /dev/snd/controlC2: mhaidekk 2321 F.... pulseaudio
+ /dev/snd/controlC1: mhaidekk 2321 F.... pulseaudio
+ /dev/snd/controlC0: mhaidekk 2321 F.... pulseaudio
+ CRDA: Error: [Errno 2] No such file or directory
+ CurrentDesktop: KDE
+ DistroRelease: Ubuntu 14.04
+ EcryptfsInUse: Yes
+ HibernationDevice: RESUME=UUID=b15a827a-7aa7-4add-a9b4-cb68262cfddd
+ InstallationDate: Installed on 2013-12-31 (161 days ago)
+ InstallationMedia: Kubuntu 12.04.3 LTS "Precise Pangolin" - Release amd64
(20130822)
+ IwConfig:
+ eth1 no wireless extensions.
+
+ lo no wireless extensions.
+ MachineType: BIOSTAR Group TA970
+ NonfreeKernelModules: fglrx
+ Package: linux (not installed)
+ ProcFB: 0 VESA VGA
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-29-generic
root=UUID=11a18cc0-0c2e-4ce8-9acd-44c5bb8820e2 ro
+ ProcVersionSignature: Ubuntu 3.13.0-29.53-generic 3.13.11.2
+ RelatedPackageVersions:
+ linux-restricted-modules-3.13.0-29-generic N/A
+ linux-backports-modules-3.13.0-29-generic N/A
+ linux-firmware 1.127.2
+ RfKill:
+
+ Tags: trusty
+ Uname: Linux 3.13.0-29-generic x86_64
+ UpgradeStatus: Upgraded to trusty on 2014-06-07 (3 days ago)
+ UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
+ _MarkForUpload: True
+ dmi.bios.date: 01/14/2013
+ dmi.bios.vendor: American Megatrends Inc.
+ dmi.bios.version: 4.6.4
+ dmi.board.asset.tag: None
+ dmi.board.name: TA970
+ dmi.board.vendor: BIOSTAR Group
+ dmi.chassis.asset.tag: None
+ dmi.chassis.type: 3
+ dmi.chassis.vendor: BIOSTAR Group
+ dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr4.6.4:bd01/14/2013:svnBIOSTARGroup:pnTA970:pvr:rvnBIOSTARGroup:rnTA970:rvr:cvnBIOSTARGroup:ct3:cvr:
+ dmi.product.name: TA970
+ dmi.sys.vendor: BIOSTAR Group
** Attachment added: "AlsaInfo.txt"
https://bugs.launchpad.net/bugs/1328746/+attachment/4129343/+files/AlsaInfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1328746
Title:
Soundblaster Audigy front panel MIDI fails to initialize
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1328746/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
