** Description changed: + SRU Justification: + + [Impact] + Users of Mellanox mlx4_{core,en} drivers may be missing hardware enablement features. + [Test Case] + Test Mellanox hardware and ensure functionality with mlx4_{core,en} drivers. + [Fix] + As described below, and summarized in Comment #5. + + -- + The following changes since commit b87885d70c29324b66ee7d4f979a9f95cc46564b: - UBUNTU: Ubuntu-3.13.0-42.71 (2014-12-05 14:35:11 +0000) + UBUNTU: Ubuntu-3.13.0-42.71 (2014-12-05 14:35:11 +0000) are attached to this tracker as patch files. The main goal for this is patch-set is to add functionality to: 1. reduce cache misses by aligning CQE/EQE writes to the actual cache line size 2. set/get link speed using ethtool [-s]. 3. set rx/tx vlan offload 4. bug fixes all of the patches are upsream (net-next), except for the last one which is a bug fix waiting for review: https://patchwork.ozlabs.org/patch/418451/ Ido Shamay (3): - net/mlx4_core: Enable CQE/EQE stride support - net/mlx4_core: Cache line EQE size support - net/mlx4_en: Add mlx4_en_get_cqe helper + net/mlx4_core: Enable CQE/EQE stride support + net/mlx4_core: Cache line EQE size support + net/mlx4_en: Add mlx4_en_get_cqe helper Saeed Mahameed (12): - net/mlx4_core: Introduce mlx4_get_module_info for cable module info reading - ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support - net/mlx4_core: Introduce ACCESS_REG CMD and eth_prot_ctrl dev cap - net/mlx4_core: Add ethernet backplane autoneg device capability - ethtool, net/mlx4_en: Add 100M, 20G, 56G speeds ethtool reporting support - net/mlx4_en: Use PTYS register to query ethtool settings - net/mlx4_en: Use PTYS register to set ethtool settings (Speed) - net/mlx4_en: Add support for setting rxvlan offload OFF/ON - net/mlx4_en: Add ethtool support for [rx|tx]vlan offload set to OFF/ON - net/mlx4_core: Prevent VF from changing port configuration - net/mlx4_en: mlx4_en_set_settings() always fails when autoneg is set - net/mlx4_en: ethtool force speed when asking for autoneg=off + net/mlx4_core: Introduce mlx4_get_module_info for cable module info reading + ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support + net/mlx4_core: Introduce ACCESS_REG CMD and eth_prot_ctrl dev cap + net/mlx4_core: Add ethernet backplane autoneg device capability + ethtool, net/mlx4_en: Add 100M, 20G, 56G speeds ethtool reporting support + net/mlx4_en: Use PTYS register to query ethtool settings + net/mlx4_en: Use PTYS register to set ethtool settings (Speed) + net/mlx4_en: Add support for setting rxvlan offload OFF/ON + net/mlx4_en: Add ethtool support for [rx|tx]vlan offload set to OFF/ON + net/mlx4_core: Prevent VF from changing port configuration + net/mlx4_en: mlx4_en_set_settings() always fails when autoneg is set + net/mlx4_en: ethtool force speed when asking for autoneg=off
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1400127 Title: Mellanox updates for Trusty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400127/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs