You have been subscribed to a public bug:
My Medion MD96420 came with this DVB-T Tuner card, which doesn't seem to
have any drivers either out of the box or from v4l-dbv. As far as I can
tell, the remote control for it doesn't work either. Here are some
specs:
lsb_release -rd
Description: Ubuntu hardy (development branch)
Release: 8.04
uname -a
Linux ShadyLappyMKII 2.6.24-15-generic #1 SMP Tue Apr 8 00:33:51 UTC 2008 i686
GNU/Linux
sudo lspci -vvnn (for the TV Tuner card)
...
06:00.0 Multimedia controller [0480]: Philips Semiconductors Unknown device
[1131:7160] (rev 03)
Subsystem: Creatix Polymedia GmbH Unknown device [16be:0034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <256ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <4us, L1 <64us
Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [74] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Vendor Specific Information
sudo lsusb -v (for the remote control receiver)
...
Bus 004 Device 002: ID 0bc7:0006 X10 Wireless Technology, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0bc7 X10 Wireless Technology, Inc.
idProduct 0x0006
bcdDevice 1.00
iManufacturer 1 X10 WTI
iProduct 2 RF receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
...
Complete output from lspci -vvnn and lsusb -v, as well as dmesg output follows.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: Incomplete
** Tags: apport-collected kernel-core kernel-needs-review needs-kernel-logs
needs-upstream-testing
--
Philips Semiconductors DVB TV Tuner Card Not Working
https://bugs.launchpad.net/bugs/215624
You received this bug notification because you are a member of Ubuntu Bugs,
which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
