** Description changed: Currently there is no way to tell when the phone is using data. This is important when deciding whether to put it into Flight Mode, when leaving Wi-Fi coverage, or when adjusting settings. It also makes apps seem less responsive when they were developed by someone who has a much faster Internet connection than you do. These issues can be resolved by implementing the network activity indicator. <https://wiki.ubuntu.com/Networking#activity-indicator> <https://wiki.ubuntu.com/Networking#activity-indicator>: "Therefore on the phone and tablet only, the “Network activity” indicator, a spinner, should be present whenever any process has used the network in the past five seconds. Its menu should list all applications that have used the network in the past five seconds, most recent first but updating only once every five seconds." (This bug report is under indicator-network initially because it covers a similar area. I have no opinion on whether the code should be part of the same package.) - This is a CTA Level 3 requirement. Clarifying if this is for WiFi data - activity only. + This is a CTA Level 3 requirement. + + 2407-2013 Technical requirements for security capability of smart mobile terminal + https://drive.google.com/open?id=0B4-sMl3SwjOIX1liUjNuVjlYTE0 + 2408-2013 Test methods for security capability of smart mobile terminal + https://drive.google.com/open?id=0B4-sMl3SwjOIT2JuNVEyY1JDc0k + + According to the requirement listed in 5.3.1.1.6 both WLAN and cellular + data are required to show data activity in the main user interface. + + -- exact language -- + + 5.3.1.1.6 mobile data network connectivity + when mobile smart terminal is connecting to a mobile data network, it should meet the following security capability requirements: + a) mobile smart terminal should provide a switch, to turn on / off mobile data network connection; + b) when the application request to access mobile data network, users should be given the appropriate prompt to approve the access; + c) when mobile smart terminal is connected to mobile data network, the mobile smart terminal should display corresponding state on the main interface; + d) when the transmitting data via mobile data network, the mobile smart terminal should prompt the state in main user interface + Above the two states in c) and d) should be prompted different. + + 5.3.1.1.6 移动通信网络数据连接 + 移动智能终端通信网络数据连接,应满足以下安全能力要求: + a) 移动智能终端应提供开关,可开启/关闭移动通信网络数据连接; + b)应用软件调用开启移动通信网络数据连接功能时,应给用户相应的提示,当用户确认后连接方可 + 开启; + c) 移动通信网络当移动通信网络的数据连接处于已连接状态,移动智能终端应在用户主界面上给用 + 户相应的状态提示; + d)当移动通信网络正在传送数据时,移动智能终端应在用户主界面上给用户相应的状态提示。 + 上述c)和d)的两种状态提示应不同。 + + ---- + 5.3.1.1.7 WLAN network connectivity + when mobile smart terminal is connecting to a WLAN, it should meet the following security capability requirements: + a) mobile smart terminal should provide a switch, to turn on / off WLAN connection; + b) when the application request to access WLAN, users should be given the appropriate prompt to approve the access; + c) when mobile smart terminal is connected to WLAN, the mobile smart terminal should display corresponding state on the main interface; + d) when the transmitting data via WLAN, the mobile smart terminal should prompt the state in main user interface + Above the two states in c) and d) should be prompted different. + + 5.3.1.1.7 WLAN 网络连接 + 移动智能终端WLAN网络连接应满足以下安全能力要求: + a) 移动智能终端应提供开关,可开启/关闭WLAN网络连接; + b)应用软件调用开启WLAN网络连接功能时,应给用户相应的提示,当用户确认后连接方可开启; + c) 当WLAN网络连接处于已连接状态,移动智能终端应在用户主界面上给用户相应的状态提示; + d)当WLAN网络正在传送数据时,移动智能终端应在用户主界面上给用户相应的状态提示。 + 上述c)和d)的两种状态提示应不同。
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1470852 Title: Network activity indicator not implemented To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1470852/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
