@talat-b87

It seems to me that the link is up, I have no clue why the link is being
showed as failed.

Settings for eth7:
        Supported ports: [ ]
        Supported link modes:   1000baseT/Full 
                                1000baseKX/Full 
                                10000baseT/Full 
                                10000baseKX4/Full 
                                10000baseKR/Full 
                                40000baseKR4/Full 
                                40000baseCR4/Full 
                                40000baseSR4/Full 
                                40000baseLR4/Full 
        Supported pause frame use: No
        Supports auto-negotiation: No
        Advertised link modes:  1000baseT/Full 
                                1000baseKX/Full 
                                10000baseT/Full 
                                10000baseKX4/Full 
                                10000baseKR/Full 
                                40000baseKR4/Full 
                                40000baseCR4/Full 
                                40000baseSR4/Full 
                                40000baseLR4/Full 
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Speed: 56000Mb/s
        Duplex: Full
        Port: Other
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        Link detected: yes


[ 17.666714] mlx4_core 0000:08:00.0: mlx4_ib: Port 1 logical link is up

root@nova-compute:/home/ubuntu# ibstat
CA 'mlx4_0'
        CA type: MT4103
        Number of ports: 2
        Firmware version: 2.35.5100
        Hardware version: 0
        Node GUID: 0xe41d2d03000a1120
        System image GUID: 0xe41d2d03000a1123
        Port 1:
                State: Active
                Physical state: LinkUp
                Rate: 56
                Base lid: 3
                LMC: 0
                SM lid: 2
                Capability mask: 0x02514868
                Port GUID: 0xe41d2d03000a1121
                Link layer: InfiniBand

@inaddy, Could you please copy this to vivid/trusty series?

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1507482

Title:
  ethtool self-test failed and creates a FW reset.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1507482/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to