Hi,
I am not wuiet sure, but I guess, I do have the excat same bug in gutsy-
tribe 5 on 2 different machines.
I also did an init 1, umounted /var/run/var/lock, and as described
above, the directories were not empty. So I deleted all the files. But
on next reboot, everything was there, again.
I can not use NetworkManager (which works on my first macine as a
workaround), because I use a very complex /etc/network/interfaces file:
auto lo
iface lo inet loopback
mapping eth0 # lan
script /usr/sbin/guessnet-ifupdown
map lan-home
map default: default-net
map timeout: 20
map verbose: true
mapping eth1 # wlan
script /usr/sbin/guessnet-ifupdown
map wlan-home
map wlan-home2
map wlan-fh
map default: default-net
map timeout: 20
map verbose: true
#
## lan
#
iface lan-home inet dhcp
test1 peer address 192.168.3.1 mac 00:12:17:15:F5:CC
post-up /etc/init.d/openvpn start licherstr
pre-down /etc/init.d/openvpn stop licherstr
#
## wlan
#
iface wlan-home inet dhcp
test1 wireless essid "RNS"
pre-up /etc/init.d/wpasupplicant.init-daemon start
post-up /etc/init.d/openvpn start licherstr
pre-down /etc/init.d/openvpn stop licherstr
post-down /etc/init.d/wpasupplicant.init-daemon stop
iface wlan-home2 inet dhcp
test1 wireless essid "RNS_FSt12"
pre-up /etc/init.d/wpasupplicant.init-daemon start
post-up /etc/init.d/openvpn start licherstr
pre-down /etc/init.d/openvpn stop licherstr
post-down /etc/init.d/wpasupplicant.init-daemon stop
iface wlan-fh inet dhcp
test1 wireless essid "FHGIFB2"
pre-up /etc/init.d/wpasupplicant.init-daemon start
post-up /etc/init.d/openvpn start licherstr
pre-down /etc/init.d/openvpn stop licherstr
post-down /etc/init.d/wpasupplicant.init-daemon stop
#
## Default
#
iface default-net inet dhcp
pre-up /etc/init.d/wpasupplicant.init-daemon start
post-up /etc/init.d/openvpn start licherstr
pre-down /etc/init.d/openvpn stop licherstr
post-down /etc/init.d/wpasupplicant.init-daemon stop
The file wpasupplicant.init-daemon is taken from
/usr/share/doc/wpasupplicant/examples and modified for my device eth1.
Everytime after having logged into gnome session, I have to open a
terminal and run ifup eth1 (Running ifdown eth1 before, I get the
information: Device has not been configured, yet. Or similar message).
Important: The exactly same setup was working absolutely fine under
Feisty. So this is a Gutsy bug.
What I tested:
cd /etc
mv initramfs-tools initramfs-tools-old
dpkg --force-depends -P initramfs-tools
aptitude install initramfs-tools
Removing the -old folder
Rebooted
Because mountkernfs.sh is in rcS.d as S01, I guess the problem is
created in the initrd.
drwxr-xr-x 2 root root 4096 2007-09-27 19:34 .
drwxr-xr-x 140 root root 12288 2007-09-28 11:19 ..
-rw-r--r-- 1 root root 785 2007-09-21 09:11 README
lrwxrwxrwx 1 root root 24 2007-02-27 17:12 S01mountkernfs.sh ->
../init.d/mountkernfs.sh
[...]
lrwxrwxrwx 1 root root 20 2007-02-27 17:12 S40networking ->
../init.d/networking
[...]
As you can see, there _should_ be no problem
Thanks
Christian
--
Intefraces do not get assigned IP-addresses on boot
https://bugs.launchpad.net/bugs/105236
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
