Public bug reported: croy-i5-ubuntu% lsb_release -rd Description: Ubuntu 16.04 LTS Release: 16.04
croy-i5-ubuntu% apt-cache policy ethtool ethtool: Installed: 1:4.5-1 Candidate: 1:4.5-1 Version table: *** 1:4.5-1 500 500 http://gb.archive.ubuntu.com/ubuntu xenial/main amd64 Packages 100 /var/lib/dpkg/status ------------------------------------------------------------------------------------------------------------------------------------------------------------------- When I suspend to disk I would like to be able to use WOL magic packet to wake After explicitly setting the 'g' flag or via /etc/network/interfaces ethtool shows 'd' after usb resume/wake I run a dual boot setup with Archlinux. This is not an issue here, WOL works. ------------------------------------------------------------------------------------------------------------------------------------------------------------------- croy-i5-ubuntu% sudo ethtool eno1 | grep Wake Supports Wake-on: pumbg Wake-on: d sudo ethtool -s eno1 wol g croy-i5-ubuntu% sudo ethtool eno1 | grep Wake Supports Wake-on: pumbg Wake-on: g systemctl suspend WOL not working usb wake croy-i5-ubuntu% sudo ethtool eno1 | grep Wake Supports Wake-on: pumbg Wake-on: d I have followed; https://help.ubuntu.com/community/WakeOnLan where setting /etc/network/interfaces iface eno1 inet dhcp up ethtool -s eno1 wol g sudo systemctl restart networking.service croy-i5-ubuntu% sudo ethtool eno1 | grep Wake Supports Wake-on: pumbg Wake-on: g systemctl suspend WOL not working usb wake croy-i5-ubuntu% sudo ethtool eno1 | grep Wake Supports Wake-on: pumbg Wake-on: d croy-i5-ubuntu% cat /proc/acpi/wakeup Device S-state Status Sysfs node PS2K S3 *enabled pnp:00:02 BR20 S4 *disabled pci:0000:00:1e.0 EUSB S3 *enabled pci:0000:00:1d.0 USBE S3 *enabled pci:0000:00:1a.0 PEX0 S4 *disabled pci:0000:00:1c.0 PEX1 S4 *disabled PEX2 S4 *disabled PEX3 S4 *disabled PEX4 S4 *disabled pci:0000:00:1c.4 PEX5 S4 *disabled PEX6 S4 *disabled pci:0000:00:1c.6 PEX7 S4 *disabled pci:0000:00:1c.7 GBE S4 *disabled pci:0000:00:19.0 <------------------------------ Now disabled P0P1 S4 *disabled P0P2 S4 *disabled P0P3 S4 *disabled P0P4 S4 *disabled GBE1 S4 *disabled SLPB S0 *disabled PWRB S3 *enabled platform:PNP0C0C:00 sudo systemctl restart networking.service croy-i5-ubuntu% cat /proc/acpi/wakeup Device S-state Status Sysfs node PS2K S3 *enabled pnp:00:02 BR20 S4 *disabled pci:0000:00:1e.0 EUSB S3 *enabled pci:0000:00:1d.0 USBE S3 *enabled pci:0000:00:1a.0 PEX0 S4 *disabled pci:0000:00:1c.0 PEX1 S4 *disabled PEX2 S4 *disabled PEX3 S4 *disabled PEX4 S4 *disabled pci:0000:00:1c.4 PEX5 S4 *disabled PEX6 S4 *disabled pci:0000:00:1c.6 PEX7 S4 *disabled pci:0000:00:1c.7 GBE S4 *enabled pci:0000:00:19.0 <------------------------------ Now enabled P0P1 S4 *disabled P0P2 S4 *disabled P0P3 S4 *disabled P0P4 S4 *disabled GBE1 S4 *disabled SLPB S0 *disabled PWRB S3 *enabled platform:PNP0C0C:00 ** Affects: ubuntu Importance: Undecided Status: New ** Tags: bot-comment ethtool wol ** Description changed: - croy-i5-ubuntu% lsb_release -rd + croy-i5-ubuntu% lsb_release -rd Description: Ubuntu 16.04 LTS Release: 16.04 croy-i5-ubuntu% apt-cache policy ethtool ethtool: - Installed: 1:4.5-1 - Candidate: 1:4.5-1 - Version table: - *** 1:4.5-1 500 - 500 http://gb.archive.ubuntu.com/ubuntu xenial/main amd64 Packages - 100 /var/lib/dpkg/status + Installed: 1:4.5-1 + Candidate: 1:4.5-1 + Version table: + *** 1:4.5-1 500 + 500 http://gb.archive.ubuntu.com/ubuntu xenial/main amd64 Packages + 100 /var/lib/dpkg/status ------------------------------------------------------------------------------------------------------------------------------------------------------------------- When I suspend to disk I would like to be able to use WOL magic packet to wake After explicitly setting the 'g' flag or via /etc/network/interfaces ethtool shows 'd' after usb resume/wake + I run a dual boot setup with Archlinux. This is not an issue here, WOL + works. + ------------------------------------------------------------------------------------------------------------------------------------------------------------------- croy-i5-ubuntu% sudo ethtool eno1 | grep Wake - Supports Wake-on: pumbg - Wake-on: d + Supports Wake-on: pumbg + Wake-on: d sudo ethtool -s eno1 wol g croy-i5-ubuntu% sudo ethtool eno1 | grep Wake - Supports Wake-on: pumbg - Wake-on: g + Supports Wake-on: pumbg + Wake-on: g systemctl suspend WOL not working usb wake croy-i5-ubuntu% sudo ethtool eno1 | grep Wake - Supports Wake-on: pumbg - Wake-on: d + Supports Wake-on: pumbg + Wake-on: d I have followed; https://help.ubuntu.com/community/WakeOnLan where setting /etc/network/interfaces iface eth0 inet dhcp - up ethtool -s eth0 wol g + up ethtool -s eth0 wol g sudo systemctl restart networking.service croy-i5-ubuntu% sudo ethtool eno1 | grep Wake - Supports Wake-on: pumbg - Wake-on: g + Supports Wake-on: pumbg + Wake-on: g systemctl suspend WOL not working usb wake croy-i5-ubuntu% sudo ethtool eno1 | grep Wake - Supports Wake-on: pumbg - Wake-on: d + Supports Wake-on: pumbg + Wake-on: d croy-i5-ubuntu% cat /proc/acpi/wakeup Device S-state Status Sysfs node PS2K S3 *enabled pnp:00:02 BR20 S4 *disabled pci:0000:00:1e.0 EUSB S3 *enabled pci:0000:00:1d.0 USBE S3 *enabled pci:0000:00:1a.0 PEX0 S4 *disabled pci:0000:00:1c.0 PEX1 S4 *disabled PEX2 S4 *disabled PEX3 S4 *disabled PEX4 S4 *disabled pci:0000:00:1c.4 PEX5 S4 *disabled PEX6 S4 *disabled pci:0000:00:1c.6 PEX7 S4 *disabled pci:0000:00:1c.7 GBE S4 *disabled pci:0000:00:19.0 <------------------------------ Now disabled P0P1 S4 *disabled P0P2 S4 *disabled P0P3 S4 *disabled P0P4 S4 *disabled GBE1 S4 *disabled SLPB S0 *disabled PWRB S3 *enabled platform:PNP0C0C:00 sudo systemctl restart networking.service croy-i5-ubuntu% cat /proc/acpi/wakeup Device S-state Status Sysfs node PS2K S3 *enabled pnp:00:02 BR20 S4 *disabled pci:0000:00:1e.0 EUSB S3 *enabled pci:0000:00:1d.0 USBE S3 *enabled pci:0000:00:1a.0 PEX0 S4 *disabled pci:0000:00:1c.0 PEX1 S4 *disabled PEX2 S4 *disabled PEX3 S4 *disabled PEX4 S4 *disabled pci:0000:00:1c.4 PEX5 S4 *disabled PEX6 S4 *disabled pci:0000:00:1c.6 PEX7 S4 *disabled pci:0000:00:1c.7 GBE S4 *enabled pci:0000:00:19.0 <------------------------------ Now enabled P0P1 S4 *disabled P0P2 S4 *disabled P0P3 S4 *disabled P0P4 S4 *disabled GBE1 S4 *disabled SLPB S0 *disabled PWRB S3 *enabled platform:PNP0C0C:00 ** Description changed: croy-i5-ubuntu% lsb_release -rd Description: Ubuntu 16.04 LTS Release: 16.04 croy-i5-ubuntu% apt-cache policy ethtool ethtool: Installed: 1:4.5-1 Candidate: 1:4.5-1 Version table: *** 1:4.5-1 500 500 http://gb.archive.ubuntu.com/ubuntu xenial/main amd64 Packages 100 /var/lib/dpkg/status ------------------------------------------------------------------------------------------------------------------------------------------------------------------- When I suspend to disk I would like to be able to use WOL magic packet to wake After explicitly setting the 'g' flag or via /etc/network/interfaces ethtool shows 'd' after usb resume/wake I run a dual boot setup with Archlinux. This is not an issue here, WOL works. ------------------------------------------------------------------------------------------------------------------------------------------------------------------- croy-i5-ubuntu% sudo ethtool eno1 | grep Wake Supports Wake-on: pumbg Wake-on: d sudo ethtool -s eno1 wol g croy-i5-ubuntu% sudo ethtool eno1 | grep Wake Supports Wake-on: pumbg Wake-on: g systemctl suspend WOL not working usb wake croy-i5-ubuntu% sudo ethtool eno1 | grep Wake Supports Wake-on: pumbg Wake-on: d I have followed; https://help.ubuntu.com/community/WakeOnLan where setting /etc/network/interfaces - iface eth0 inet dhcp - up ethtool -s eth0 wol g + iface eno1 inet dhcp + up ethtool -s eno1 wol g sudo systemctl restart networking.service croy-i5-ubuntu% sudo ethtool eno1 | grep Wake Supports Wake-on: pumbg Wake-on: g systemctl suspend WOL not working usb wake croy-i5-ubuntu% sudo ethtool eno1 | grep Wake Supports Wake-on: pumbg Wake-on: d croy-i5-ubuntu% cat /proc/acpi/wakeup Device S-state Status Sysfs node PS2K S3 *enabled pnp:00:02 BR20 S4 *disabled pci:0000:00:1e.0 EUSB S3 *enabled pci:0000:00:1d.0 USBE S3 *enabled pci:0000:00:1a.0 PEX0 S4 *disabled pci:0000:00:1c.0 PEX1 S4 *disabled PEX2 S4 *disabled PEX3 S4 *disabled PEX4 S4 *disabled pci:0000:00:1c.4 PEX5 S4 *disabled PEX6 S4 *disabled pci:0000:00:1c.6 PEX7 S4 *disabled pci:0000:00:1c.7 GBE S4 *disabled pci:0000:00:19.0 <------------------------------ Now disabled P0P1 S4 *disabled P0P2 S4 *disabled P0P3 S4 *disabled P0P4 S4 *disabled GBE1 S4 *disabled SLPB S0 *disabled PWRB S3 *enabled platform:PNP0C0C:00 sudo systemctl restart networking.service croy-i5-ubuntu% cat /proc/acpi/wakeup Device S-state Status Sysfs node PS2K S3 *enabled pnp:00:02 BR20 S4 *disabled pci:0000:00:1e.0 EUSB S3 *enabled pci:0000:00:1d.0 USBE S3 *enabled pci:0000:00:1a.0 PEX0 S4 *disabled pci:0000:00:1c.0 PEX1 S4 *disabled PEX2 S4 *disabled PEX3 S4 *disabled PEX4 S4 *disabled pci:0000:00:1c.4 PEX5 S4 *disabled PEX6 S4 *disabled pci:0000:00:1c.6 PEX7 S4 *disabled pci:0000:00:1c.7 GBE S4 *enabled pci:0000:00:19.0 <------------------------------ Now enabled P0P1 S4 *disabled P0P2 S4 *disabled P0P3 S4 *disabled P0P4 S4 *disabled GBE1 S4 *disabled SLPB S0 *disabled PWRB S3 *enabled platform:PNP0C0C:00 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1576398 Title: WOL reverts to 'd' after suspend or reboot when explicitly setting 'g' via 'ethtool -s eth0 wol g' or via /etc/network/interfaces To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1576398/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
