Public bug reported:
This problem started occurring in Gutsy Gibbon beta after an upgrade
from Feisty Fawn. I am running the latest Gutsy packages - no updates
are available from update-manager.
When I suspend my Dell Latitude D820 via Fn-ESC standby key, it appears
to suspend normally. The screen goes black and the power LED blinks.
When I resume from suspend, the battery indicator in my GNOME system
tray panel has a popup that says "Sleep Problem", see the help file for
possible problems.
I have "ACPI_SLEEP=true" in /etc/default/acpi-support. Here are messages
from relevant log files:
>From /var/log/messages
Oct 11 19:38:06 lager gnome-power-manager: (jtimberman) Suspending computer
because the suspend button has been pressed
Oct 11 19:38:08 lager dhcdbd: Unrequested down ?:3
Oct 11 19:38:08 lager kernel: [ 1032.248000] ACPI: PCI interrupt for device
0000:09:00.0 disabled
Oct 11 19:38:09 lager kernel: [ 1032.460000] ACPI: PCI interrupt for device
0000:0c:00.0 disabled
Oct 11 19:39:30 lager gnome-power-manager: (jtimberman) Resuming computer
Oct 11 19:39:30 lager gnome-power-manager: (jtimberman) suspend failed
Oct 11 19:39:30 lager kernel: [ 1034.388000] Stopping tasks ... done.
Oct 11 19:39:30 lager kernel: [ 1034.536000] Suspending console(s)
Oct 11 19:39:30 lager kernel: [ 1034.572000] sd 0:0:0:0: [sda] Synchronizing
SCSI cache
Oct 11 19:39:30 lager kernel: [ 1035.016000] sd 0:0:0:0: [sda] Stopping disk
Oct 11 19:39:30 lager kernel: [ 1035.980000] pnp: Device 00:0c disabled.
Oct 11 19:39:30 lager kernel: [ 1036.000000] ACPI: PCI interrupt for device
0000:00:1f.2 disabled
Oct 11 19:39:30 lager kernel: [ 1036.016000] ACPI: PCI interrupt for device
0000:00:1d.7 disabled
Oct 11 19:39:30 lager kernel: [ 1036.032000] ACPI: PCI interrupt for device
0000:00:1d.3 disabled
Oct 11 19:39:30 lager kernel: [ 1036.032000] ACPI: PCI interrupt for device
0000:00:1d.2 disabled
Oct 11 19:39:30 lager kernel: [ 1036.032000] ACPI: PCI interrupt for device
0000:00:1d.1 disabled
Oct 11 19:39:30 lager kernel: [ 1036.032000] ACPI: PCI interrupt for device
0000:00:1d.0 disabled
Oct 11 19:39:30 lager kernel: [ 1036.036000] ACPI: PCI interrupt for device
0000:00:1b.0 disabled
Oct 11 19:39:30 lager kernel: [ 1036.056000] Disabling non-boot CPUs ...
Oct 11 19:39:30 lager kernel: [ 1036.172000] CPU 1 is now offline
Oct 11 19:39:30 lager kernel: [ 1036.172000] SMP alternatives: switching to UP
code
Oct 11 19:39:30 lager kernel: [ 1036.172000] CPU1 is down
Oct 11 19:39:30 lager kernel: [ 1036.172000] Enabling non-boot CPUs ...
Oct 11 19:39:30 lager kernel: [ 1036.184000] SMP alternatives: switching to SMP
code
Oct 11 19:39:30 lager kernel: [ 1036.184000] Booting processor 1/1 eip 3000
Oct 11 19:39:30 lager kernel: [ 1036.192000] Initializing CPU#1
Oct 11 19:39:30 lager kernel: [ 1036.272000] Calibrating delay using timer
specific routine.. 3657.65 BogoMIPS (lpj=7315301)
Oct 11 19:39:30 lager kernel: [ 1036.272000] monitor/mwait feature present.
Oct 11 19:39:30 lager kernel: [ 1036.272000] CPU: L1 I cache: 32K, L1 D cache:
32K
Oct 11 19:39:30 lager kernel: [ 1036.272000] CPU: L2 cache: 2048K
Oct 11 19:39:30 lager kernel: [ 1036.272000] CPU: Physical Processor ID: 0
Oct 11 19:39:30 lager kernel: [ 1036.272000] CPU: Processor Core ID: 1
Oct 11 19:39:30 lager kernel: [ 1036.272000] CPU1: Intel(R) Core(TM)2 CPU
T5600 @ 1.83GHz stepping 06
Oct 11 19:39:30 lager kernel: [ 1036.272000] CPU1 is up
Oct 11 19:39:30 lager kernel: [ 1036.752000] Switched to high resolution mode
on CPU 1
Oct 11 19:39:30 lager kernel: [ 1036.784000] ACPI: PCI Interrupt
0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Oct 11 19:39:30 lager kernel: [ 1036.800000] ACPI: PCI Interrupt
0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
Oct 11 19:39:30 lager kernel: [ 1037.864000] hda_intel: azx_get_response
timeout, switching to polling mode...
Oct 11 19:39:30 lager kernel: [ 1037.904000] ACPI: PCI Interrupt
0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
Oct 11 19:39:30 lager kernel: [ 1037.904000] usb usb1: root hub lost power or
was reset
Oct 11 19:39:30 lager kernel: [ 1037.904000] PCI: Enabling device 0000:00:1d.1
(0000 -> 0001)
Oct 11 19:39:30 lager kernel: [ 1037.904000] ACPI: PCI Interrupt
0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
Oct 11 19:39:30 lager kernel: [ 1037.904000] usb usb2: root hub lost power or
was reset
Oct 11 19:39:30 lager kernel: [ 1037.904000] PCI: Enabling device 0000:00:1d.2
(0000 -> 0001)
Oct 11 19:39:30 lager kernel: [ 1037.904000] ACPI: PCI Interrupt
0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
Oct 11 19:39:30 lager kernel: [ 1037.904000] usb usb3: root hub lost power or
was reset
Oct 11 19:39:30 lager kernel: [ 1037.904000] PCI: Enabling device 0000:00:1d.3
(0000 -> 0001)
Oct 11 19:39:30 lager kernel: [ 1037.904000] ACPI: PCI Interrupt
0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
Oct 11 19:39:30 lager kernel: [ 1037.904000] usb usb4: root hub lost power or
was reset
Oct 11 19:39:30 lager kernel: [ 1037.920000] ACPI: PCI Interrupt
0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
Oct 11 19:39:30 lager kernel: [ 1037.936000] ACPI: PCI Interrupt
0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
Oct 11 19:39:30 lager kernel: [ 1037.936000] Yenta O2: res at 0x94/0xD4: 00/ea
Oct 11 19:39:30 lager kernel: [ 1037.936000] Yenta O2: enabling read
prefetch/write burst
Oct 11 19:39:30 lager kernel: [ 1038.000000] ohci1394: fw-host0: OHCI-1394 1.1
(PCI): IRQ=[19] MMIO=[ef9ff000-ef9ff7ff] Max Packet=[2048] IR/IT
contexts=[8/8]
Oct 11 19:39:30 lager kernel: [ 1038.032000] pnp: Device 00:0c activated.
Oct 11 19:39:30 lager kernel: [ 1038.232000] sd 0:0:0:0: [sda] Starting disk
Oct 11 19:39:30 lager kernel: [ 1038.428000] ata2.00: configured for UDMA/33
Oct 11 19:39:30 lager kernel: [ 1038.564000] ata1.00: configured for UDMA/133
Oct 11 19:39:30 lager kernel: [ 1038.568000] sd 0:0:0:0: [sda] 117210240
512-byte hardware sectors (60012 MB)
Oct 11 19:39:30 lager kernel: [ 1038.572000] Restarting tasks ... <5>sd
0:0:0:0: [sda] Write Protect is off
Oct 11 19:39:30 lager kernel: [ 1038.600000] usb 2-1: USB disconnect, address 6
Oct 11 19:39:30 lager kernel: [ 1038.600000] usb 2-1.2: USB disconnect, address
7
Oct 11 19:39:30 lager kernel: [ 1038.604000] sd 0:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 11 19:39:30 lager kernel: [ 1039.028000] done.
Oct 11 19:39:30 lager kernel: [ 1039.100000] usb 5-2: USB disconnect, address 6
Oct 11 19:39:30 lager kernel: [ 1039.352000] usb 5-2: new high speed USB device
using ehci_hcd and address 8
Oct 11 19:39:31 lager kernel: [ 1039.492000] usb 5-2: configuration #1 chosen
from 1 choice
Oct 11 19:39:31 lager kernel: [ 1039.492000] hub 5-2:1.0: USB hub found
Oct 11 19:39:31 lager kernel: [ 1039.492000] hub 5-2:1.0: 4 ports detected
Oct 11 19:39:31 lager kernel: [ 1039.604000] input: PS/2 Mouse as
/class/input/input18
Oct 11 19:39:31 lager kernel: [ 1039.624000] input: AlpsPS/2 ALPS GlidePoint as
/class/input/input19
Oct 11 19:39:31 lager kernel: [ 1039.732000] tg3.c:v3.77 (May 31, 2007)
Oct 11 19:39:31 lager kernel: [ 1039.732000] ACPI: PCI Interrupt
0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18
Oct 11 19:39:31 lager kernel: [ 1039.752000] eth0: Tigon3 [partno(BCM5752KFBG)
rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:19:b9:69:df:1f
Oct 11 19:39:31 lager kernel: [ 1039.752000] eth0: RXcsums[1] LinkChgREG[0]
MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
Oct 11 19:39:31 lager kernel: [ 1039.752000] eth0: dma_rwctrl[76180000]
dma_mask[64-bit]
Oct 11 19:39:31 lager kernel: [ 1039.768000] ieee80211: 802.11
data/management/control stack, git-1.1.13
Oct 11 19:39:31 lager kernel: [ 1039.768000] ieee80211: Copyright (C) 2004-2005
Intel Corporation <[EMAIL PROTECTED]>
Oct 11 19:39:31 lager kernel: [ 1039.872000] ADDRCONF(NETDEV_UP): eth0: link is
not ready
Oct 11 19:39:31 lager kernel: [ 1039.872000] ipw3945: Intel(R) PRO/Wireless
3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
Oct 11 19:39:31 lager kernel: [ 1039.872000] ipw3945: Copyright(c) 2003-2006
Intel Corporation
Oct 11 19:39:31 lager kernel: [ 1039.876000] ACPI: PCI Interrupt
0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Oct 11 19:39:31 lager kernel: [ 1039.876000] ipw3945: Detected Intel
PRO/Wireless 3945ABG Network Connection
Oct 11 19:39:31 lager kernel: [ 1040.252000] usb 2-1: new full speed USB device
using uhci_hcd and address 8
Oct 11 19:39:32 lager kernel: [ 1040.404000] usb 2-1: configuration #1 chosen
from 1 choice
Oct 11 19:39:32 lager kernel: [ 1040.408000] hub 2-1:1.0: USB hub found
Oct 11 19:39:32 lager kernel: [ 1040.408000] hub 2-1:1.0: 3 ports detected
Oct 11 19:39:31 lager kernel: [ 1040.680000] input: Lid Switch as
/class/input/input20
Oct 11 19:39:31 lager kernel: [ 1040.680000] ACPI: Lid Switch [LID]
Oct 11 19:39:31 lager kernel: [ 1040.680000] input: Power Button (CM) as
/class/input/input21
Oct 11 19:39:31 lager kernel: [ 1040.680000] ACPI: Power Button (CM) [PBTN]
Oct 11 19:39:31 lager kernel: [ 1040.680000] input: Sleep Button (CM) as
/class/input/input22
Oct 11 19:39:31 lager kernel: [ 1040.684000] ACPI: Sleep Button (CM) [SBTN]
Oct 11 19:39:31 lager kernel: [ 1040.724000] ACPI: Thermal Zone [THM] (38 C)
Oct 11 19:39:31 lager kernel: [ 1040.728000] usb 2-1.2: new full speed USB
device using uhci_hcd and address 9
Oct 11 19:39:31 lager kernel: [ 1040.768000] ACPI: AC Adapter [AC] (off-line)
Oct 11 19:39:31 lager kernel: [ 1040.820000] ACPI: Battery Slot [BAT0] (battery
present)
Oct 11 19:39:31 lager kernel: [ 1040.820000] ACPI: Battery Slot [BAT1] (battery
absent)
Oct 11 19:39:31 lager kernel: [ 1040.848000] usb 2-1.2: configuration #1 chosen
from 1 choice
Oct 11 19:39:32 lager kernel: [ 1041.672000] ipw3945: Detected geography ABG
(11 802.11bg channels, 13 802.11a channels)
Oct 11 19:39:32 lager kernel: [ 1041.916000] ADDRCONF(NETDEV_UP): eth1: link is
not ready
Oct 11 19:39:46 lager kernel: [ 1056.276000] ADDRCONF(NETDEV_CHANGE): eth1:
link becomes ready
Oct 11 19:39:52 lager dhcdbd: dhco_input_option: Value -1 cannot be converted
to type L
Oct 11 19:39:52 lager dhcdbd: dhco_parse_option_settings: bad option setting:
new_dhcp_lease_time = -1
Oct 11 19:39:52 lager dhcdbd: message_handler: message handler not found under
/com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.domain_name
Oct 11 19:39:52 lager dhcdbd: message_handler: message handler not found under
/com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.nis_domain
Oct 11 19:39:52 lager dhcdbd: message_handler: message handler not found under
/com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.nis_servers
>From /var/log/acpid
[Thu Oct 11 19:38:06 2007] received event "button/sleep SBTN 00000080 00000001"
[Thu Oct 11 19:38:06 2007] notifying client 5194[107:114]
[Thu Oct 11 19:38:06 2007] notifying client 5229[0:0]
[Thu Oct 11 19:38:06 2007] executing action "/etc/acpi/sleep.sh"
[Thu Oct 11 19:38:06 2007] BEGIN HANDLER MESSAGES
[Thu Oct 11 19:38:06 2007] END HANDLER MESSAGES
[Thu Oct 11 19:38:06 2007] action exited with status 0
[Thu Oct 11 19:38:06 2007] completed event "button/sleep SBTN 00000080 00000001"
[Thu Oct 11 19:39:30 2007] received event "ac_adapter AC 00000080 00000000"
[Thu Oct 11 19:39:30 2007] notifying client 5194[107:114]
[Thu Oct 11 19:39:30 2007] notifying client 5229[0:0]
[Thu Oct 11 19:39:30 2007] client has disconnected
[Thu Oct 11 19:39:30 2007] executing action "/etc/acpi/power.sh"
[Thu Oct 11 19:39:30 2007] BEGIN HANDLER MESSAGES
[Thu Oct 11 19:39:30 2007] END HANDLER MESSAGES
[Thu Oct 11 19:39:30 2007] action exited with status 0
[Thu Oct 11 19:39:30 2007] completed event "ac_adapter AC 00000080 00000000"
[Thu Oct 11 19:39:30 2007] received event "button/lid LID 00000080 00000001"
[Thu Oct 11 19:39:30 2007] notifying client 5194[107:114]
[Thu Oct 11 19:39:30 2007] executing action "/etc/acpi/lid.sh"
[Thu Oct 11 19:39:30 2007] BEGIN HANDLER MESSAGES
[Thu Oct 11 19:39:30 2007] END HANDLER MESSAGES
[Thu Oct 11 19:39:30 2007] action exited with status 0
[Thu Oct 11 19:39:30 2007] completed event "button/lid LID 00000080 00000001"
[Thu Oct 11 19:39:30 2007] received event "battery BAT0 00000081 00000001"
[Thu Oct 11 19:39:30 2007] notifying client 5194[107:114]
[Thu Oct 11 19:39:30 2007] executing action "/etc/acpi/power.sh"
[Thu Oct 11 19:39:30 2007] BEGIN HANDLER MESSAGES
[Thu Oct 11 19:39:30 2007] END HANDLER MESSAGES
[Thu Oct 11 19:39:30 2007] action exited with status 0
[Thu Oct 11 19:39:30 2007] completed event "battery BAT0 00000081 00000001"
[Thu Oct 11 19:39:30 2007] received event "battery BAT1 00000081 00000000"
[Thu Oct 11 19:39:30 2007] notifying client 5194[107:114]
[Thu Oct 11 19:39:30 2007] executing action "/etc/acpi/power.sh"
[Thu Oct 11 19:39:30 2007] BEGIN HANDLER MESSAGES
[Thu Oct 11 19:39:30 2007] END HANDLER MESSAGES
[Thu Oct 11 19:39:30 2007] action exited with status 0
[Thu Oct 11 19:39:30 2007] completed event "battery BAT1 00000081 00000000"
[Thu Oct 11 19:39:31 2007] client connected from 5229[0:0]
[Thu Oct 11 19:39:31 2007] 1 client rule loaded
** Affects: ubuntu
Importance: Undecided
Status: New
--
Sleep problem: resume from stand by
https://bugs.launchpad.net/bugs/151804
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
