Public bug reported: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
affects /ubuntu/multipath-tools importance high # version 0.4.7-2ubuntu3 Test executed for: gutsy binary-amd64 multipath-tools Outcome: erroneous package! blame: arg:tmp/multipath-tools/src/multipath-tools.deb deb:multipath-tools multipath-tools badpkg: installation of multipath-tools failed, exit code 100 quitting: erroneous package: installation of multipath-tools failed, exit code 100 erroneous package! This message is automatically generated by the autopkgtest package testing system. You are receiving it because: The test results appear to indicate a problem with the package and reports for package maintainers for gutsy are being directed to [EMAIL PROTECTED] The top and tail of the test log, which is intended to be sufficient to diagnose most failures, can be found below. However, in case this is not sufficient, a complete log can be found along with output files, saved temporary files, and so on, at: http://autopkgtest.ubuntu.com/autopkgtest-output/ The test environment is an amd64 Xen guest with limited amounts of memory. The relevant dependencies are installed for each test but very few other packages. Most autopkgtest reports are FTBFS problems. Please forgive this bug report if the problem is due to archive skew; in that case you've just been unlucky with the timing. Feel free to close the bug if the skew has been fixed, or will be fixed soon. If you have any questions about this service please contact me at: Ian Jackson <[EMAIL PROTECTED]> Regards, Ian - -8<- ++++++ fetching http://archive.ubuntu.com/ubuntu/dists/gutsy/main/binary-amd64/Packages.gz ++++++ ++++++ selecting ++++++ selected multipath-tools (age <never-yet>, score 28342600) Package: multipath-tools Priority: extra Section: admin Installed-Size: 680 Maintainer: Fabio M. Di Nitto <[EMAIL PROTECTED]> Original-Maintainer: Debian LVM Team <[EMAIL PROTECTED]> Architecture: amd64 Version: 0.4.7-2ubuntu3 Depends: libc6 (>= 2.6-1), libdevmapper1.02.1, libncurses5 (>= 5.6), libreadline5 (>= 5.2), libsysfs2, udev (>> 0.086), initscripts (>= 2.85-16), dmsetup, sysv-rc (>= 2.86.ds1-14.1ubuntu2) Suggests: sg3-utils Conflicts: sg-utils Filename: pool/main/m/multipath-tools/multipath-tools_0.4.7-2ubuntu3_amd64.deb Size: 181572 MD5sum: 26de8dbad6db46b688da7d548f923686 SHA1: 5673c49f290be71d9c248a871e54c35c791fcbee SHA256: c2c6a240274e868ac11908e93d6a401d3dc9c8800447aba89e81b2d7fd700873 Description: Command-line utilities for administering multipath disk access These tools are in charge of maintaining the disk multipath device maps and react to path and map events. Bugs: mailto:[EMAIL PROTECTED] Origin: Ubuntu ++++++ fetching http://archive.ubuntu.com/ubuntu/pool/main/m/multipath-tools/multipath-tools_0.4.7-2ubuntu3_amd64.deb ++++++ ++++++ starting test ++++++ + adt-run --tmp-dir tmp/multipath-tools/tmp --output-dir tmp/multipath-tools/out --log-file tmp/multipath-tools/log --summary tmp/_summary --built-binaries-filter=__ --binaries=install --binary tmp/multipath-tools/src/multipath-tools.deb --instantiate --- adt-virt-xenlvm --userv --distro=gutsy -- adt-run: trace: ** init adt-run: trace: ** start adt-run: trace: $ vserver: adt-virt-xenlvm --userv --distro=gutsy -- File descriptor 6 left open File descriptor 7 left open adt-run: trace: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ starting adt-run: trace: ** open, scratch=None File descriptor 6 left open File descriptor 11 left open File descriptor 6 left open File descriptor 11 left open adt-run: trace: * initialising adt-run: trace: * no key generation needed adt-run: trace: * reset adt-run: trace: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ builds ... adt-run: trace: @@@@@@@@@@@@@@@@@@@@ deb deb0 adt-run: trace: * register what=deb0 deb_forbuilds=install pkg=multipath-tools af=deb0-deb~tmp/multipath-tools/src/multipath-tools.deb:tmp/multipath-tools/src/multipath-tools.deb!|- adt-run: trace: @@@@@@@@@@@@@@@@@@@@ instantiate instantiate1 adt-run: trace: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ builds done. adt-run: trace: * reset adt-run: trace: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ tests ... adt-run: trace: @@@@@@@@@@@@@@@@@@@@ test deb deb0 adt-run: trace: * register what=deb0 deb_fortests=install pkg=multipath-tools af=deb0-deb~tmp/multipath-tools/src/multipath-tools.deb:tmp/multipath-tools/src/multipath-tools.deb!|- adt-run: trace: @@@@@@@@@@@@@@@@@@@@ test instantiate instantiate1 adt-run: trace: ** reset ** File descriptor 6 left open File descriptor 11 left open File descriptor 6 left open File descriptor 11 left open adt-run: trace: * publish adt-run: trace: $ ftparchive: sh -ec <SCRIPT> x tmp/multipath-tools/tmp/binaries /home/iwj/.autopkgtest/gpg adt-run: trace: $ apt-key: sh -ec <SCRIPT> OK Get:1 file: Release.gpg [189B] Get:2 http://archive.ubuntu.com gutsy Release.gpg [191B] Hit http://archive.ubuntu.com gutsy Release Get:3 file: Release [724B] Hit http://archive.ubuntu.com gutsy/main Packages Hit http://archive.ubuntu.com gutsy/restricted Packages Hit http://archive.ubuntu.com gutsy/universe Packages Hit http://archive.ubuntu.com gutsy/multiverse Packages Ign file: Packages Fetched 1B in 0s (16B/s) Reading package lists... adt-run: trace: * publish reinstall checking... adt-run: trace: * publish install... adt-run: trace: $ apt-get-install-multipath-tools: sh -c apt-get\\ -qy\\ -o\\ Debug::pkgProblemResolver=true\\ -o\\ Dir::Etc::sourcelist=/root/adt-downtmp/binaries/sources.list\\ install\\ multipath-tools\\ >&2 Reading package lists... Building dependency tree... Reading state information... Starting Starting 2 Done The following extra packages will be installed: dmsetup Suggested packages: sg3-utils The following NEW packages will be installed: dmsetup multipath-tools 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 41.7kB/223kB of archives. After unpacking 848kB of additional disk space will be used. Get:1 http://archive.ubuntu.com gutsy/main dmsetup 2:1.02.20-1ubuntu4 [41.7kB] Fetched 41.7kB in 0s (2107kB/s) Selecting previously deselected package dmsetup. (Reading database ... 10414 files and directories currently installed.) Unpacking dmsetup (from .../dmsetup_2%3a1.02.20-1ubuntu4_amd64.deb) ... Selecting previously deselected package multipath-tools. Unpacking multipath-tools (from .../binaries/./multipath-tools.deb) ... FATAL: Could not load /lib/modules/2.6.16.53/modules.dep: No such file or directory dpkg: error processing /root/adt-downtmp/binaries/./multipath-tools.deb (--unpack): subprocess pre-installation script returned error exit status 1 E: Sub-process /usr/bin/dpkg returned an error code (1) blame: arg:tmp/multipath-tools/src/multipath-tools.deb deb:multipath-tools multipath-tools badpkg: installation of multipath-tools failed, exit code 100 adt-run: erroneous package: installation of multipath-tools failed, exit code 100 adt-run: trace: ** stop adt-run: trace: ** close, scratch=tb-scratch~/root/adt-downtmp:-/|/root/adt-downtmp/! ++++++ RESULTS erroneous package! ++++++ ++++++ bundling ++++++ ++++++ uploading ++++++ ++++++ contacting maintainer_email_override ++++++ ++++++ tested. ++++++ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux) iD8DBQFHICCs4qsES9Ynl2gRAsALAJ0c15bvYVfLoIVSzI2zn7M/cMY7rwCeNVhJ NmcB3T4ALko3efZig8NdNz0= =niFS -----END PGP SIGNATURE----- ** Affects: multipath-tools (Ubuntu) Importance: High Status: New -- autopkgtest gutsy multipath-tools amd64: erroneous package! https://bugs.launchpad.net/bugs/156957 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
