I've just installed Kubuntu 7.10 and yes, this bug still persists. I've just booted into Kubuntu with two USB mass storage devices connected (a external HD and a small USB flash drive) and neither is detected.
lsusb output: [EMAIL PROTECTED]:~$ lsusb Bus 002 Device 003: ID 4146:ba01 USBest Technology Intuix Flash Drive Bus 002 Device 002: ID 067b:2507 Prolific Technology, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 dmesg output: [EMAIL PROTECTED]:~$ dmesg [ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: root=UUID=a33e88ec-7cf1-4fa7-91a5-72127ad15d7b ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bef0000 (usable) [ 0.000000] BIOS-e820: 000000007bef0000 - 000000007bef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bef3000 - 000000007bf00000 (ACPI data) [ 0.000000] BIOS-e820: 000000007c000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 507632) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F72A0 checksum 0 [ 0.000000] ACPI: RSDP 000F72A0, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT 7BEF30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7BEFB0C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7BEF3240, 7E07 (r1 NVIDIA ASUSACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 7BEF0000, 0040 [ 0.000000] ACPI: SSDT 7BEFB2C0, 0206 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET 7BEFB540, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 7BEFB5C0, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 7BEFB200, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007bef0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 507632) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007bef0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 507632 [ 0.000000] On node 0 totalpages: 507535 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1125 pages reserved [ 0.000000] DMA zone: 2818 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6884 pages used for memmap [ 0.000000] DMA32 zone: 496652 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 499470 [ 0.000000] Kernel command line: root=UUID=a33e88ec-7cf1-4fa7-91a5-72127ad15d7b ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 17.751237] time.c: Detected 2104.388 MHz processor. [ 17.754023] Console: colour VGA+ 80x25 [ 17.754039] Checking aperture... [ 17.754042] CPU 0: aperture @ 130c000000 size 32 MB [ 17.754043] Aperture too small (32 MB) [ 17.760698] No AGP bridge found [ 17.776778] Memory: 1990512k/2030528k available (2274k kernel code, 39628k reserved, 1181k data, 296k init) [ 17.776821] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 17.855584] Calibrating delay using timer specific routine.. 4212.23 BogoMIPS (lpj=8424466) [ 17.855613] Security Framework v1.0.0 initialized [ 17.855619] SELinux: Disabled at boot. [ 17.855771] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 17.856827] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.857331] Mount-cache hash table entries: 256 [ 17.857446] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 17.857449] CPU: L2 Cache: 512K (64 bytes/line) [ 17.857451] CPU 0/0 -> Node 0 [ 17.857453] CPU: Physical Processor ID: 0 [ 17.857455] CPU: Processor Core ID: 0 [ 17.857471] SMP alternatives: switching to UP code [ 17.857699] Early unpacking initramfs... done [ 18.133675] ACPI: Core revision 20070126 [ 18.133739] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.178546] Using local APIC timer interrupts. [ 18.226010] result 12526114 [ 18.226012] Detected 12.526 MHz APIC timer. [ 18.227179] SMP alternatives: switching to SMP code [ 18.227293] Booting processor 1/2 APIC 0x1 [ 18.237558] Initializing CPU#1 [ 18.315203] Calibrating delay using timer specific routine.. 4208.82 BogoMIPS (lpj=8417654) [ 18.315209] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.315211] CPU: L2 Cache: 512K (64 bytes/line) [ 18.315214] CPU 1/1 -> Node 0 [ 18.315215] CPU: Physical Processor ID: 0 [ 18.315217] CPU: Processor Core ID: 1 [ 18.315309] AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01 [ 18.319015] Brought up 2 CPUs [ 19.069852] migration_cost=178 [ 19.069834] NET: Registered protocol family 16 [ 19.069913] ACPI: bus type pci registered [ 19.069918] PCI: Using configuration type 1 [ 19.071506] ACPI: EC: Look up EC in DSDT [ 19.079371] ACPI: Interpreter enabled [ 19.079374] ACPI: (supports S0 S1 S3 S4 S5) [ 19.079390] ACPI: Using IOAPIC for interrupt routing [ 19.091719] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 19.091728] PCI: Probing PCI hardware (bus 00) [ 19.092615] PCI: Transparent bridge - 0000:00:10.0 [ 19.092651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 19.092951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 19.206645] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.206866] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) [ 19.207081] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.207301] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.207516] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.207731] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.207947] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15) [ 19.208161] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.208379] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.208594] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.208809] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.209024] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.209240] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 19.209455] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.209670] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.209885] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.210105] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.210320] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.210537] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 19.210752] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.211003] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 19.211244] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 19.211484] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 19.211725] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 19.211965] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 19.212205] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 19.212445] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 19.212685] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 19.212927] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 19.213169] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 19.213411] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 19.213656] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 19.213900] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 19.214143] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 19.214385] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 19.214626] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 19.214867] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 19.215109] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 19.215352] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 19.215593] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 19.215835] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 19.215958] Linux Plug and Play Support v0.97 (c) Adam Belay [ 19.215971] pnp: PnP ACPI init [ 19.215980] ACPI: bus type pnp registered [ 19.222252] pnp: PnP ACPI: found 14 devices [ 19.222255] ACPI: ACPI bus type pnp unregistered [ 19.222309] PCI: Using ACPI for IRQ routing [ 19.222313] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 19.222395] NET: Registered protocol family 8 [ 19.222397] NET: Registered protocol family 20 [ 19.222469] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 19.222474] hpet0: 3 32-bit timers, 25000000 Hz [ 19.223531] pnp: 00:01: ioport range 0x4000-0x407f has been reserved [ 19.223534] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved [ 19.223536] pnp: 00:01: ioport range 0x4400-0x447f has been reserved [ 19.223539] pnp: 00:01: ioport range 0x4480-0x44ff has been reserved [ 19.223542] pnp: 00:01: ioport range 0x4800-0x487f has been reserved [ 19.223545] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved [ 19.223547] pnp: 00:01: ioport range 0x2000-0x207f has been reserved [ 19.223550] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved [ 19.223554] pnp: 00:01: iomem range 0x7c000000-0x7fffffff could not be reserved [ 19.223565] pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved [ 19.223569] pnp: 00:0d: iomem range 0xf0000-0xf3fff could not be reserved [ 19.223572] pnp: 00:0d: iomem range 0xf4000-0xf7fff could not be reserved [ 19.223575] pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 19.223578] pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 19.223849] PCI: Bridge: 0000:00:02.0 [ 19.223851] IO window: c000-cfff [ 19.223855] MEM window: fde00000-fdefffff [ 19.223857] PREFETCH window: fdd00000-fddfffff [ 19.223860] PCI: Bridge: 0000:00:03.0 [ 19.223862] IO window: b000-bfff [ 19.223864] MEM window: fdc00000-fdcfffff [ 19.223867] PREFETCH window: fdb00000-fdbfffff [ 19.223870] PCI: Bridge: 0000:00:04.0 [ 19.223872] IO window: d000-dfff [ 19.223874] MEM window: fd800000-fd8fffff [ 19.223877] PREFETCH window: fd700000-fd7fffff [ 19.223880] PCI: Bridge: 0000:00:10.0 [ 19.223882] IO window: a000-afff [ 19.223886] MEM window: fda00000-fdafffff [ 19.223889] PREFETCH window: fd900000-fd9fffff [ 19.223901] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 19.223907] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 19.223912] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 19.223919] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 19.223930] NET: Registered protocol family 2 [ 19.226079] Time: hpet clocksource has been installed. [ 19.265892] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 19.266586] TCP established hash table entries: 262144 (order: 10, 6291456 bytes) [ 19.269400] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 19.269908] TCP: Hash tables configured (established 262144 bind 65536) [ 19.269912] TCP reno registered [ 19.281920] checking if image is initramfs... it is [ 19.821537] Freeing initrd memory: 7170k freed [ 19.825918] audit: initializing netlink socket (disabled) [ 19.825933] audit(1193325711.036:1): initialized [ 19.827880] VFS: Disk quotas dquot_6.5.1 [ 19.827930] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 19.828008] io scheduler noop registered [ 19.828010] io scheduler anticipatory registered [ 19.828012] io scheduler deadline registered [ 19.828096] io scheduler cfq registered (default) [ 19.828115] Boot video device is 0000:00:05.0 [ 19.853853] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 19.853874] assign_interrupt_mode Found MSI capability [ 19.853877] Allocate Port Service[0000:00:02.0:pcie00] [ 19.853939] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 19.853957] assign_interrupt_mode Found MSI capability [ 19.853959] Allocate Port Service[0000:00:03.0:pcie00] [ 19.854012] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 19.854030] assign_interrupt_mode Found MSI capability [ 19.854032] Allocate Port Service[0000:00:04.0:pcie00] [ 19.878934] Real Time Clock Driver v1.12ac [ 19.879155] hpet_resources: 0xfefff000 is busy [ 19.879174] Linux agpgart interface v0.102 (c) Dave Jones [ 19.879177] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.879281] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.879899] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.880598] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.880720] input: Macintosh mouse button emulation as /class/input/input0 [ 19.880794] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 19.881107] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.881112] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.881263] mice: PS/2 mouse device common for all mice [ 19.881384] TCP cubic registered [ 19.881434] NET: Registered protocol family 1 [ 19.881622] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 19.881632] Freeing unused kernel memory: 296k freed [ 19.915518] input: AT Translated Set 2 keyboard as /class/input/input1 [ 21.058866] AppArmor: AppArmor initialized<5>audit(1193325712.272:2): type=1505 info="AppArmor initialized" pid=1285 [ 21.065347] fuse init (API version 7.8) [ 21.070469] Failure registering capabilities with primary security module. [ 21.091280] ACPI: Fan [FAN] (on) [ 21.097335] ACPI: Thermal Zone [THRM] (40 C) [ 21.609856] usbcore: registered new interface driver usbfs [ 21.609887] usbcore: registered new interface driver hub [ 21.609908] usbcore: registered new device driver usb [ 21.610627] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 21.611070] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 21.611081] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 21.611275] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 21.611282] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 21.611443] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 21.611463] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000 [ 21.656715] SCSI subsystem initialized [ 21.662118] libata version 2.21 loaded. [ 21.671008] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 21.671014] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 21.677363] usb usb1: configuration #1 chosen from 1 choice [ 21.677392] hub 1-0:1.0: USB hub found [ 21.677402] hub 1-0:1.0: 8 ports detected [ 21.786882] sata_nv 0000:00:0e.0: version 3.4 [ 21.787327] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 [ 21.787337] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22 [ 21.787552] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 21.788129] scsi0 : sata_nv [ 21.790730] scsi1 : sata_nv [ 21.791213] ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001e000 irq 22 [ 21.791218] ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001e008 irq 22 [ 22.090308] usb 1-3: new full speed USB device using ohci_hcd and address 2 [ 22.266300] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 22.297771] usb 1-3: configuration #1 chosen from 1 choice [ 22.438232] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100 [ 22.605866] usb 1-8: new full speed USB device using ohci_hcd and address 3 [ 22.622003] ata1.00: configured for UDMA/100 [ 22.810132] usb 1-8: configuration #1 chosen from 1 choice [ 22.813228] usbcore: registered new interface driver libusual [ 22.816105] Initializing USB Mass Storage driver... [ 22.816168] scsi2 : SCSI emulation for USB Mass Storage devices [ 22.816216] usb-storage: device found at 2 [ 22.816218] usb-storage: waiting for device to settle before scanning [ 22.816254] scsi3 : SCSI emulation for USB Mass Storage devices [ 22.816287] usb-storage: device found at 3 [ 22.816288] usb-storage: waiting for device to settle before scanning [ 22.816299] usbcore: registered new interface driver usb-storage [ 22.816301] USB Mass Storage support registered. [ 22.937253] ata2: SATA link down (SStatus 0 SControl 300) [ 22.948509] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB00 PQ: 0 ANSI: 5 [ 22.948804] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [ 22.948828] NFORCE-MCP51: chipset revision 161 [ 22.948830] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 22.948837] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller [ 22.948845] ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA [ 22.948854] ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA [ 22.948861] Probing IDE interface ide0... [ 22.966529] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 22.966535] Uniform CD-ROM driver Revision: 3.20 [ 22.966728] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 22.969721] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 23.245172] hda: ST360015A, ATA DISK drive [ 23.920724] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 23.924362] Probing IDE interface ide1... [ 24.495773] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 24.495787] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 21 [ 24.495961] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 24.495969] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 24.496033] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 24.496063] ehci_hcd 0000:00:0b.1: debug port 1 [ 24.496067] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 24.496080] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000 [ 24.496088] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.496328] usb 1-3: USB disconnect, address 2 [ 24.496183] usb usb2: configuration #1 chosen from 1 choice [ 24.496223] hub 2-0:1.0: USB hub found [ 24.496250] hub 2-0:1.0: 8 ports detected [ 24.507366] hda: max request size: 128KiB [ 24.507674] hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) [ 24.507785] hda: cache flushes supported [ 24.507827] hda: hda1 hda2 hda3 [ 24.627361] usb 1-8: USB disconnect, address 3 [ 24.804514] Attempting manual resume [ 24.804518] swsusp: Resume From Partition 3:2 [ 24.804520] PM: Checking swsusp image. [ 24.804677] PM: Resume from disk failed. [ 25.002891] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 25.148702] usb 2-3: configuration #1 chosen from 1 choice [ 25.148954] scsi4 : SCSI emulation for USB Mass Storage devices [ 25.148799] usb-storage: device found at 2 [ 25.148803] usb-storage: waiting for device to settle before scanning [ 25.394399] usb 2-8: new high speed USB device using ehci_hcd and address 3 [ 25.530980] usb 2-8: configuration #1 chosen from 1 choice [ 25.531104] scsi5 : SCSI emulation for USB Mass Storage devices [ 25.530951] usb-storage: device found at 3 [ 25.530955] usb-storage: waiting for device to settle before scanning [ 30.144414] usb-storage: device scan complete [ 30.179754] scsi 4:0:0:0: Direct-Access SAMSUNG MP0804H UE10 PQ: 0 ANSI: 0 [ 30.179986] scsi 4:0:0:0: Attached scsi generic sg1 type 0 [ 30.527949] usb-storage: device scan complete [ 30.531555] scsi 5:0:0:0: Direct-Access Pretec 256MB Wave 1.00 PQ: 0 ANSI: 2 [ 30.531971] scsi 5:0:0:0: Attached scsi generic sg2 type 0 [ 31.847469] sd 4:0:0:0: [sda] 156368015 512-byte hardware sectors (80060 MB) [ 31.858576] sd 4:0:0:0: [sda] Write Protect is off [ 31.858582] sd 4:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 31.858585] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 31.861268] sd 4:0:0:0: [sda] 156368015 512-byte hardware sectors (80060 MB) [ 31.865138] sd 4:0:0:0: [sda] Write Protect is off [ 31.865140] sd 4:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 31.865142] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 31.865147] sda:<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 32.277666] sda1 [ 32.277784] sd 4:0:0:0: [sda] Attached SCSI disk [ 32.285652] sd 5:0:0:0: [sdb] 512000 512-byte hardware sectors (262 MB) [ 32.289644] sd 5:0:0:0: [sdb] Write Protect is off [ 32.289650] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 32.289653] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 32.301833] sd 5:0:0:0: [sdb] 512000 512-byte hardware sectors (262 MB) [ 32.305823] sd 5:0:0:0: [sdb] Write Protect is off [ 32.305826] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 32.305829] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 32.305835] sdb: sdb1 [ 32.311826] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 32.345375] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 32.360275] ath_hal: module license 'Proprietary' taints kernel. [ 32.365422] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 32.504440] input: PC Speaker as /class/input/input2 [ 32.608086] wlan: 0.8.4.2 (0.9.3.2) [ 32.654669] input: GenPS/2 Genius Mouse as /class/input/input3 [ 32.886600] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 32.886613] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16 [ 32.886621] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 32.886793] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 [ 32.914833] ath_pci: 0.9.4.5 (0.9.3.2) [ 32.915303] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 32.915313] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 33.431881] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 33.431906] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 33.451220] parport_pc 00:09: reported by Plug and Play ACPI [ 33.451253] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 33.476412] ath_rate_sample: 1.2 (0.9.3.2) [ 33.476736] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 33.476740] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 33.476748] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 33.476753] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 33.476756] wifi0: mac 5.9 phy 4.3 radio 4.6 [ 33.476760] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 33.476762] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 33.476764] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 33.476766] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 33.476768] wifi0: Use hw queue 8 for CAB traffic [ 33.476770] wifi0: Use hw queue 9 for beacons [ 33.528071] wifi0: Atheros 5212: mem=0xfdaf0000, irq=17 [ 33.706218] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 33.706231] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20 [ 33.706410] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 34.355116] loop: module loaded [ 34.393405] lp0: using parport0 (interrupt-driven). [ 34.491467] Adding 979956k swap on /dev/hda2. Priority:-1 extents:1 across:979956k [ 35.702260] No dock devices found. [ 35.743347] input: Power Button (FF) as /class/input/input4 [ 35.743631] ACPI: Power Button (FF) [PWRF] [ 35.744847] input: Power Button (CM) as /class/input/input5 [ 35.745120] ACPI: Power Button (CM) [PWRB] [ 36.041742] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (version 2.00.00) [ 36.041589] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xa [ 36.041594] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xb [ 36.041596] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xd [ 36.041599] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 41.024955] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 41.024961] vboxdrv: Successfully done. [ 41.386890] Failure registering capabilities with primary security module. [ 59.809329] NET: Registered protocol family 10 [ 59.809427] lo: Disabled Privacy Extensions [ 60.960523] NET: Registered protocol family 17 [ 69.832911] ath0: no IPv6 routers present -- USB drive not detected if booted with drive connected https://bugs.launchpad.net/bugs/49890 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
