Public bug reported:
possibly the same as https://bugs.launchpad.net/ubuntu/+source/linux-
source-2.6.22/+bug/153730
I had contact with someone on Digikam, which in Feisty reacted well on my
camera.
In Gutsy however, my camera is not detected. This man said me it is probably a
bug in the kernel.
I installed gphoto2 and then followed the normal procedure to connect my
camera to the computer: select USB-modus in settings on the camera, switched
it off, connected it with the USB-cable, switch it on again (after which the
camera switches off automatically).
Then I entered the commands 'gphoto2 --auto-detect', 'lsusb' and
'dmesg', this is the output:
[EMAIL PROTECTED]:~$ gphoto2 --auto-detect
Model Port
----------------------------------------------------------
[EMAIL PROTECTED]:~$ lsusb
Bus 005 Device 001: ID 0000:0000
Bus 001 Device 008: ID 0784:1691 Vivitar, Inc.
Bus 001 Device 007: ID 049c:0002 Acer Advanced Labs, Inc. Keyboard (???)
Bus 001 Device 006: ID 04a5:0001 Acer Peripherals Inc. (now BenQ Corp.)
Keyboard
Bus 001 Device 004: ID 046d:c041 Logitech, Inc.
Bus 001 Device 005: ID 04a5:9213 Acer Peripherals Inc. (now BenQ Corp.) Kbd
Hub
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
[EMAIL PROTECTED]:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14
21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] Command line: root=UUID=1041fb0d-5cf8-4a2c-9699-af6f1d34754a ro
quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bee0000 (usable)
[ 0.000000] BIOS-e820: 000000003bee0000 - 000000003bee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bee3000 - 000000003bef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003bef0000 - 000000003bf00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 245472) 1 entries of 3200
used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F75D0 checksum 0
[ 0.000000] ACPI: RSDP 000F75D0, 0024 (r2 AWARD )
[ 0.000000] ACPI: XSDT 3BEE30C0, 0044 (r1 AWARD ASUSACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: FACP 3BEEAB00, 00F4 (r3 AWARD ASUSACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: DSDT 3BEE3240, 785F (r1 AWARD ASUSACPI 1000 MSFT
3000000)
[ 0.000000] ACPI: FACS 3BEE0000, 0040
[ 0.000000] ACPI: MCFG 3BEEADC0, 003C (r1 AWARD ASUSACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: APIC 3BEEAC40, 0090 (r1 AWARD ASUSACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: SSDT 3BEEB320, 0304 (r1 AWARD ASUSACPI 42302E31 AWRD
0)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003bee0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 245472) 1 entries of 3200
used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003bee0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 245472
[ 0.000000] On node 0 totalpages: 245375
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1124 pages reserved
[ 0.000000] DMA zone: 2819 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3300 pages used for memmap
[ 0.000000] DMA32 zone: 238076 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
3bf00000:a4100000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 240895
[ 0.000000] Kernel command line:
root=UUID=1041fb0d-5cf8-4a2c-9699-af6f1d34754a ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 17.994901] time.c: Detected 1862.057 MHz processor.
[ 17.995972] Console: colour VGA+ 80x25
[ 17.995991] Checking aperture...
[ 17.996003] Calgary: detecting Calgary via BIOS EBDA area
[ 17.996005] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 18.012802] Memory: 956120k/981888k available (2274k kernel code, 25380k
reserved, 1181k data, 296k init)
[ 18.012890] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4,
Nodes=1
[ 18.092741] Calibrating delay using timer specific routine.. 3732.32
BogoMIPS (lpj=7464650)
[ 18.092781] Security Framework v1.0.0 initialized
[ 18.092787] SELinux: Disabled at boot.
[ 18.092897] Dentry cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 18.093245] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 18.094946] Mount-cache hash table entries: 256
[ 18.095057] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 18.095059] CPU: L2 cache: 2048K
[ 18.095061] CPU 0/0 -> Node 0
[ 18.095063] using mwait in idle threads.
[ 18.095065] CPU: Physical Processor ID: 0
[ 18.095067] CPU: Processor Core ID: 0
[ 18.095073] CPU0: Thermal monitoring enabled (TM1)
[ 18.095082] SMP alternatives: switching to UP code
[ 18.095278] Early unpacking initramfs... done
[ 18.590026] ACPI: Core revision 20070126
[ 18.590079] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml
not found.
[ 18.637801] Using local APIC timer interrupts.
[ 18.691420] result 16625494
[ 18.691422] Detected 16.625 MHz APIC timer.
[ 18.691793] SMP alternatives: switching to SMP code
[ 18.691881] Booting processor 1/2 APIC 0x1
[ 18.702131] Initializing CPU#1
[ 18.779580] Calibrating delay using timer specific routine.. 3724.21
BogoMIPS (lpj=7448437)
[ 18.779587] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 18.779589] CPU: L2 cache: 2048K
[ 18.779591] CPU 1/1 -> Node 0
[ 18.779593] CPU: Physical Processor ID: 0
[ 18.779594] CPU: Processor Core ID: 1
[ 18.779601] CPU1: Thermal monitoring enabled (TM2)
[ 18.779916] Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 18.783609] Brought up 2 CPUs
[ 18.837537] migration_cost=43
[ 18.837719] NET: Registered protocol family 16
[ 18.837801] ACPI: bus type pci registered
[ 18.837809] PCI: Using configuration type 1
[ 18.837811] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 18.837813] mtrr: probably your BIOS does not setup all CPUs.
[ 18.837814] mtrr: corrected configuration.
[ 18.840426] ACPI: EC: Look up EC in DSDT
[ 18.849670] ACPI: Interpreter enabled
[ 18.849676] ACPI: (supports S0 S1 S3 S4 S5)
[ 18.849699] ACPI: Using IOAPIC for interrupt routing
[ 18.858763] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.858777] PCI: Probing PCI hardware (bus 00)
[ 18.860332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.860603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 18.929203] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 18.929216] PCI: Probing PCI hardware (bus 80)
[ 18.929344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 18.929905] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 18.930106] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 18.930309] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
[ 18.930508] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
[ 18.930687] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 18.930860] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 18.931034] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 18.931218] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
[ 18.931338] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.931348] pnp: PnP ACPI init
[ 18.931355] ACPI: bus type pnp registered
[ 18.936498] pnp: PnP ACPI: found 14 devices
[ 18.936501] ACPI: ACPI bus type pnp unregistered
[ 18.936557] PCI: Using ACPI for IRQ routing
[ 18.936560] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 18.936670] NET: Registered protocol family 8
[ 18.936672] NET: Registered protocol family 20
[ 18.936690] PCI-GART: No AMD northbridge found.
[ 18.936742] pnp: 00:01: ioport range 0x400-0x47f has been reserved
[ 18.936745] pnp: 00:01: ioport range 0x500-0x50f has been reserved
[ 18.936756] pnp: 00:0a: iomem range 0x10000000-0x10000fff could not be
reserved
[ 18.936761] pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 18.936766] pnp: 00:0d: iomem range 0xcf000-0xcffff has been reserved
[ 18.936769] pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 18.936772] pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 18.936774] pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 18.937063] PCI: Bridge: 0000:00:01.0
[ 18.937064] IO window: disabled.
[ 18.937070] MEM window: dd000000-deffffff
[ 18.937074] PREFETCH window: d8000000-dbffffff
[ 18.937079] PCI: Bridge: 0000:00:03.0
[ 18.937082] IO window: b000-cfff
[ 18.937088] MEM window: dfe00000-dfefffff
[ 18.937092] PREFETCH window: disabled.
[ 18.937110] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 18.937128] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) ->
IRQ 31
[ 18.937134] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 18.937146] NET: Registered protocol family 2
[ 18.939316] Time: acpi_pm clocksource has been installed.
[ 18.983540] IP route cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 18.983905] TCP established hash table entries: 131072 (order: 9, 3145728
bytes)
[ 18.987017] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 18.988822] TCP: Hash tables configured (established 131072 bind 65536)
[ 18.988826] TCP reno registered
[ 18.999752] checking if image is initramfs... it is
[ 19.698107] Freeing initrd memory: 7212k freed
[ 19.702558] audit: initializing netlink socket (disabled)
[ 19.702588] audit(1193480049.664:1): initialized
[ 19.704770] VFS: Disk quotas dquot_6.5.1
[ 19.704823] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 19.704920] io scheduler noop registered
[ 19.704922] io scheduler anticipatory registered
[ 19.704924] io scheduler deadline registered
[ 19.705024] io scheduler cfq registered (default)
[ 19.705044] PCI: VIA PCI bridge detected. Disabling DAC.
[ 19.706623] Boot video device is 0000:01:00.0
[ 19.706771] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 19.706822] assign_interrupt_mode Found MSI capability
[ 19.706825] Allocate Port Service[0000:00:03.0:pcie00]
[ 19.706863] Allocate Port Service[0000:00:03.0:pcie02]
[ 19.727663] Real Time Clock Driver v1.12ac
[ 19.727786] Linux agpgart interface v0.102 (c) Dave Jones
[ 19.727789] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 19.727891] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.728545] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.729239] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 19.729483] input: Macintosh mouse button emulation as /class/input/input0
[ 19.729592] PNP: No PS/2 controller found. Probing ports directly.
[ 19.730121] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.730126] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.730255] mice: PS/2 mouse device common for all mice
[ 19.730426] TCP cubic registered
[ 19.730477] NET: Registered protocol family 1
[ 19.730701] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c:
unable to open rtc device (rtc0)
[ 19.730709] Freeing unused kernel memory: 296k freed
[ 20.887966] AppArmor: AppArmor initialized<5>audit(1193480050.848:2):
type=1505 info="AppArmor initialized" pid=1240
[ 20.892656] fuse init (API version 7.8)
[ 20.896407] Failure registering capabilities with primary security module.
[ 20.920980] ACPI: Fan [FAN] (on)
[ 20.924849] ACPI: SSDT 3BEEAE40, 0175 (r1 AWARD ASUSACPI 42302E31 AWRD
0)
[ 20.925170] ACPI: SSDT 3BEEB250, 00CE (r1 AWARD ASUSACPI 42302E31 AWRD
0)
[ 20.925361] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 20.925371] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 20.926703] ACPI: Thermal Zone [THRM] (40 C)
[ 21.344816] usbcore: registered new interface driver usbfs
[ 21.344842] usbcore: registered new interface driver hub
[ 21.344864] usbcore: registered new device driver usb
[ 21.345468] USB Universal Host Controller Interface driver v3.0
[ 21.345598] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 21.345611] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 21.345820] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1
[ 21.345848] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e000
[ 21.345943] usb usb1: configuration #1 chosen from 1 choice
[ 21.345965] hub 1-0:1.0: USB hub found
[ 21.345970] hub 1-0:1.0: 2 ports detected
[ 21.365261] SCSI subsystem initialized
[ 21.369408] libata version 2.21 loaded.
[ 21.437125] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 21.442977] Floppy drive(s): fd0 is 1.44M
[ 21.449007] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) ->
IRQ 22
[ 21.449031] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 21.449055] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 2
[ 21.449083] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000dc00
[ 21.449180] usb usb2: configuration #1 chosen from 1 choice
[ 21.449207] hub 2-0:1.0: USB hub found
[ 21.449213] hub 2-0:1.0: 2 ports detected
[ 21.464720] FDC 0 is a post-1991 82077
[ 21.553761] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) ->
IRQ 21
[ 21.553775] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 21.553798] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 3
[ 21.553828] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
[ 21.553935] usb usb3: configuration #1 chosen from 1 choice
[ 21.553961] hub 3-0:1.0: USB hub found
[ 21.553966] hub 3-0:1.0: 2 ports detected
[ 21.658459] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) ->
IRQ 23
[ 21.658469] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 21.658492] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 4
[ 21.658520] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d400
[ 21.658610] usb usb4: configuration #1 chosen from 1 choice
[ 21.658645] hub 4-0:1.0: USB hub found
[ 21.658650] hub 4-0:1.0: 2 ports detected
[ 21.690483] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 21.758981] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) ->
IRQ 21
[ 21.759623] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 21.759692] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 5
[ 21.759736] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdffff000
[ 21.806856] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 21.806996] usb usb5: configuration #1 chosen from 1 choice
[ 21.807026] hub 5-0:1.0: USB hub found
[ 21.807034] hub 5-0:1.0: 8 ports detected
[ 21.911762] ahci 0000:03:00.0: version 2.2
[ 21.911796] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 28 (level, low) ->
IRQ 28
[ 21.912421] PCI: Disallowing DAC for device 0000:03:00.0
[ 22.221828] usb 1-1: device not accepting address 2, error -71
[ 22.914210] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3
impl SATA mode
[ 22.914214] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum
part
[ 22.914221] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 22.914728] scsi0 : ahci
[ 22.914929] scsi1 : ahci
[ 22.915080] ata1: SATA max UDMA/133 cmd 0xffffc200005f0100 ctl
0x0000000000000000 bmdma 0x0000000000000000 irq 28
[ 22.915085] ata2: SATA max UDMA/133 cmd 0xffffc200005f0180 ctl
0x0000000000000000 bmdma 0x0000000000000000 irq 28
[ 23.228246] ata1: SATA link down (SStatus 0 SControl 300)
[ 23.542478] ata2: SATA link down (SStatus 0 SControl 300)
[ 23.544712] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
[ 23.544726] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 29 (level, low) ->
IRQ 29
[ 23.544767] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 23.544819] scsi2 : pata_jmicron
[ 23.545463] scsi3 : pata_jmicron
[ 23.545612] ata3: PATA max UDMA/100 cmd 0x000000000001cc00 ctl
0x000000000001c802 bmdma 0x000000000001bc00 irq 29
[ 23.545616] ata4: PATA max UDMA/100 cmd 0x000000000001c400 ctl
0x000000000001c002 bmdma 0x000000000001bc08 irq 29
[ 23.871833] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) ->
IRQ 23
[ 23.872085] eth0: VIA Rhine II at 0x1d000, 00:0e:a6:f8:da:cd, IRQ 23.
[ 23.872800] eth0: MII PHY found at address 1, status 0x786d advertising
01e1 Link 45e1.
[ 23.872909] sata_via 0000:00:0f.0: version 2.2
[ 23.872925] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) ->
IRQ 21
[ 23.872955] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 23.872997] scsi4 : sata_via
[ 23.873376] scsi5 : sata_via
[ 23.873651] ata5: SATA max UDMA/133 cmd 0x000000000001fc00 ctl
0x000000000001f802 bmdma 0x000000000001ec00 irq 21
[ 23.873655] ata6: SATA max UDMA/133 cmd 0x000000000001f400 ctl
0x000000000001f002 bmdma 0x000000000001ec08 irq 21
[ 23.892194] usb 1-1: new full speed USB device using uhci_hcd and address 4
[ 24.078033] ata5: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 24.081329] usb 1-1: configuration #1 chosen from 1 choice
[ 24.290770] ata6: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 24.305641] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 24.305648] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 24.306290] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 24.306325] VP_IDE: chipset revision 7
[ 24.306327] VP_IDE: not 100% native mode: will probe irqs later
[ 24.306340] VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on
pci0000:00:0f.1
[ 24.306347] ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA,
hdb:DMA
[ 24.306356] ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA,
hdd:pio
[ 24.306363] Probing IDE interface ide0...
[ 24.326790] usb 1-2: new full speed USB device using uhci_hcd and address 5
[ 24.506642] usb 1-2: configuration #1 chosen from 1 choice
[ 24.509554] hub 1-2:1.0: USB hub found
[ 24.512523] hub 1-2:1.0: 3 ports detected
[ 24.722024] hda: MAXTOR 6L040J2, ATA DISK drive
[ 24.827987] usb 1-2.1: new full speed USB device using uhci_hcd and address
6
[ 24.971831] usb 1-2.1: configuration #1 chosen from 1 choice
[ 25.004766] hdb: Maxtor 6Y120L0, ATA DISK drive
[ 25.061526] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 25.070098] Probing IDE interface ide1...
[ 25.191371] usb 1-2.2: new low speed USB device using uhci_hcd and address
7
[ 25.309261] usb 1-2.2: configuration #1 chosen from 1 choice
[ 25.315185] usbcore: registered new interface driver hiddev
[ 25.322453] input: Logitech USB Gaming Mouse as /class/input/input1
[ 25.322477] input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on
usb-0000:00:10.0-1
[ 25.333166] hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on
usb-0000:00:10.0-1
[ 25.337179] input: API API USB KB HUB as /class/input/input2
[ 25.337188] input: USB HID v1.00 Keyboard [API API USB KB HUB] on
usb-0000:00:10.0-2.1
[ 25.384085] input: HID 049c:0002 as /class/input/input3
[ 25.384111] input,hiddev97: USB HID v1.00 Device [HID 049c:0002] on
usb-0000:00:10.0-2.2
[ 25.384121] usbcore: registered new interface driver usbhid
[
25.384125]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 25.935557] hdc: HL-DT-ST DVDRAM GSA-H42L, ATAPI CD/DVD-ROM drive
[ 26.270785] ide1 at 0x170-0x177,0x376 on irq 15
[ 26.280369] hda: max request size: 128KiB
[ 26.280519] hda: 78177792 sectors (40027 MB) w/1819KiB Cache,
CHS=65535/16/63, UDMA(133)
[ 26.280688] hda: cache flushes supported
[ 26.280734] hda: hda1 hda2 hda3 hda4
[ 26.303440] hdb: max request size: 128KiB
[ 26.303580] hdb: 240121728 sectors (122942 MB) w/2048KiB Cache,
CHS=65535/16/63, UDMA(133)
[ 26.303712] hdb: cache flushes supported
[ 26.303742] hdb: hdb1 hdb2 hdb3 hdb4
[ 26.330943] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache,
UDMA(66)
[ 26.330953] Uniform CD-ROM driver Revision: 3.20
[ 26.834747] Attempting manual resume
[ 26.834750] swsusp: Resume From Partition 3:1
[ 26.834752] PM: Checking swsusp image.
[ 26.834944] PM: Resume from disk failed.
[ 26.873097] kjournald starting. Commit interval 5 seconds
[ 26.873111] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.454400] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 32.494125] Netfilter messages via NETLINK v0.30.
[ 32.505134] nf_conntrack version 0.5.0 (3835 buckets, 30680 max)
[ 33.995405] agpgart: Detected VIA P4M890 chipset
[ 34.002278] agpgart: AGP aperture is 128M @ 0xd0000000
[ 34.135072] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.161352] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.200897] input: PC Speaker as /class/input/input4
[ 34.459959] parport_pc 00:09: reported by Plug and Play ACPI
[ 34.460043] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 34.537263] usbcore: registered new interface driver xpad
[
34.537268]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c:
driver for Xbox controllers v0.1.6
[ 34.771250] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 34.771965] PCI: Setting latency timer of device 0000:80:01.0 to 64
[ 35.299498] lp0: using parport0 (interrupt-driven).
[ 35.357207] Adding 3903784k swap on /dev/hda1. Priority:-1 extents:1
across:3903784k
[ 35.691745] EXT3 FS on hda3, internal journal
[ 36.409190] kjournald starting. Commit interval 5 seconds
[ 36.409431] EXT3 FS on hda4, internal journal
[ 36.409435] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.430537] kjournald starting. Commit interval 5 seconds
[ 36.430781] EXT3 FS on hda2, internal journal
[ 36.430784] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.141961] input: Power Button (FF) as /class/input/input5
[ 37.141981] ACPI: Power Button (FF) [PWRF]
[ 37.142020] input: Power Button (CM) as /class/input/input6
[ 37.142034] ACPI: Power Button (CM) [PWRB]
[ 37.142072] input: Sleep Button (CM) as /class/input/input7
[ 37.142088] ACPI: Sleep Button (CM) [SLPB]
[ 37.199744] No dock devices found.
[ 38.556704] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 38.714060] ppdev: user-space parallel port driver
[ 39.461783] audit(1193480070.256:3): type=1503
operation="inode_permission" requested_mask="a" denied_mask="a"
name="/dev/tty" pid=5260 profile="/usr/sbin/cupsd"
[ 41.399177] Failure registering capabilities with primary security module.
[ 41.560897] Bluetooth: Core ver 2.11
[ 41.561086] NET: Registered protocol family 31
[ 41.561089] Bluetooth: HCI device and connection manager initialized
[ 41.561093] Bluetooth: HCI socket layer initialized
[ 41.579681] Bluetooth: L2CAP ver 2.8
[ 41.579686] Bluetooth: L2CAP socket layer initialized
[ 41.643108] Bluetooth: RFCOMM socket layer initialized
[ 41.643200] Bluetooth: RFCOMM TTY layer initialized
[ 41.643203] Bluetooth: RFCOMM ver 1.8
[ 46.349118] NET: Registered protocol family 17
[ 52.930443] NET: Registered protocol family 10
[ 52.930733] lo: Disabled Privacy Extensions
[ 53.175047] Inbound IN=eth0 OUT=
MAC=00:0e:a6:f8:da:cd:00:05:01:9a:98:38:08:00 SRC=91.189.94.4
DST=130.89.230.59 LEN=104 TOS=0x00 PREC=0x00 TTL=49 ID=20527 PROTO=ICMP
TYPE=3 CODE=3 [SRC=130.89.230.59 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00
TTL=55 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 ]
[ 54.179552] Inbound IN=eth0 OUT=
MAC=00:0e:a6:f8:da:cd:00:05:01:9a:98:38:08:00 SRC=91.189.94.4
DST=130.89.230.59 LEN=104 TOS=0x00 PREC=0x00 TTL=49 ID=20528 PROTO=ICMP
TYPE=3 CODE=3 [SRC=130.89.230.59 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00
TTL=55 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 ]
[ 55.170407] Inbound IN=eth0 OUT=
MAC=00:0e:a6:f8:da:cd:00:05:01:9a:98:38:08:00 SRC=91.189.94.4
DST=130.89.230.59 LEN=104 TOS=0x00 PREC=0x00 TTL=49 ID=20529 PROTO=ICMP
TYPE=3 CODE=3 [SRC=130.89.230.59 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00
TTL=55 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 ]
[ 56.176649] Inbound IN=eth0 OUT=
MAC=00:0e:a6:f8:da:cd:00:05:01:9a:98:38:08:00 SRC=91.189.94.4
DST=130.89.230.59 LEN=104 TOS=0x00 PREC=0x00 TTL=49 ID=20530 PROTO=ICMP
TYPE=3 CODE=3 [SRC=130.89.230.59 DST=91.189.94.4 LEN=76 TOS=0x00 PREC=0x00
TTL=55 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56 ]
[ 57.008450] hda-intel: Invalid position buffer, using LPIB read method
instead.
[ 63.377928] eth0: no IPv6 routers present
[ 333.334989] Inbound IN=eth0 OUT=
MAC=00:0e:a6:f8:da:cd:00:05:01:9a:98:38:08:00 SRC=62.149.226.17
DST=130.89.230.59 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=32169 DF PROTO=TCP
SPT=1165 DPT=32000 WINDOW=16384 RES=0x00 SYN URGP=0
[ 333.335043] Inbound IN=eth0 OUT=
MAC=00:0e:a6:f8:da:cd:00:05:01:9a:98:38:08:00 SRC=62.149.226.17
DST=130.89.230.59 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=32172 DF PROTO=TCP
SPT=1168 DPT=32001 WINDOW=16384 RES=0x00 SYN URGP=0
[ 336.294707] Inbound IN=eth0 OUT=
MAC=00:0e:a6:f8:da:cd:00:05:01:9a:98:38:08:00 SRC=62.149.226.17
DST=130.89.230.59 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=33909 DF PROTO=TCP
SPT=1165 DPT=32000 WINDOW=16384 RES=0x00 SYN URGP=0
[ 336.294749] Inbound IN=eth0 OUT=
MAC=00:0e:a6:f8:da:cd:00:05:01:9a:98:38:08:00 SRC=62.149.226.17
DST=130.89.230.59 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=33942 DF PROTO=TCP
SPT=1168 DPT=32001 WINDOW=16384 RES=0x00 SYN URGP=0
[ 644.899583] klammail[6749]: segfault at 00000000ffffffff rip
00002b3495f11b30 rsp 00007fff15b76d28 error 4
[ 652.374667] klammail[6780]: segfault at 00000000ffffffff rip
00002ba7f1572b30 rsp 00007fffba5136c8 error 4
[ 734.015532] usb 1-2.3: new full speed USB device using uhci_hcd and address
8
[ 734.145418] usb 1-2.3: configuration #1 chosen from 1 choice
[ 734.228643] usbcore: registered new interface driver libusual
[ 734.264911] Initializing USB Mass Storage driver...
[ 734.265574] scsi6 : SCSI emulation for USB Mass Storage devices
[ 734.265720] usb-storage: device found at 8
[ 734.265723] usb-storage: waiting for device to settle before scanning
[ 734.265873] usbcore: registered new interface driver usb-storage
[ 734.265953] USB Mass Storage support registered.
[ 739.261669] usb-storage: device scan complete
[ 739.264671] scsi 6:0:0:0: Direct-Access Supra DC-6900 1.00
PQ: 0 ANSI: 2
[ 739.311575] sd 6:0:0:0: [sda] 2012160 512-byte hardware sectors (1030 MB)
[ 739.314817] sd 6:0:0:0: [sda] Write Protect is off
[ 739.314823] sd 6:0:0:0: [sda] Mode Sense: 1f 00 00 08
[ 739.314826] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 739.323700] sd 6:0:0:0: [sda] 2012160 512-byte hardware sectors (1030 MB)
[ 739.326591] sd 6:0:0:0: [sda] Write Protect is off
[ 739.326595] sd 6:0:0:0: [sda] Mode Sense: 1f 00 00 08
[ 739.326597] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 739.326602] sda: sda1
[ 739.338658] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 739.370617] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 769.466560] usb 1-2.3: reset full speed USB device using uhci_hcd and
address 8
[ 779.652336] usb 1-2.3: reset full speed USB device using uhci_hcd and
address 8
[ 779.852021] usb 1-2.3: reset full speed USB device using uhci_hcd and
address 8
[ 790.027787] usb 1-2.3: reset full speed USB device using uhci_hcd and
address 8
[ 790.136761] sd 6:0:0:0: scsi: Device offlined - not ready after error
recovery
[ 790.136776] sd 6:0:0:0: [sda] Result: hostbyte=DID_ABORT
driverbyte=DRIVER_OK,SUGGEST_OK
[ 790.136781] end_request: I/O error, dev sda, sector 2012144
[ 790.136787] Buffer I/O error on device sda, logical block 251518
[ 790.137133] sd 6:0:0:0: rejecting I/O to offline device
[ 790.137138] Buffer I/O error on device sda, logical block 251518
[ 790.137317] sd 6:0:0:0: rejecting I/O to offline device
[ 790.137321] Buffer I/O error on device sda, logical block 0
[ 790.137463] sd 6:0:0:0: rejecting I/O to offline device
[ 790.137466] Buffer I/O error on device sda, logical block 0
[ 790.137613] sd 6:0:0:0: rejecting I/O to offline device
[ 790.137616] Buffer I/O error on device sda, logical block 1
[ 790.137757] sd 6:0:0:0: rejecting I/O to offline device
[ 790.137760] Buffer I/O error on device sda, logical block 2
[ 790.137900] sd 6:0:0:0: rejecting I/O to offline device
[ 790.137903] Buffer I/O error on device sda, logical block 0
[ 790.138050] sd 6:0:0:0: rejecting I/O to offline device
[ 790.138054] Buffer I/O error on device sda, logical block 251519
[ 790.138218] sd 6:0:0:0: rejecting I/O to offline device
[ 790.138222] Buffer I/O error on device sda, logical block 251519
[ 790.138375] sd 6:0:0:0: rejecting I/O to offline device
[ 790.138378] Buffer I/O error on device sda, logical block 251519
[ 790.138528] sd 6:0:0:0: rejecting I/O to offline device
[ 790.138605] sd 6:0:0:0: rejecting I/O to offline device
[ 790.138682] sd 6:0:0:0: rejecting I/O to offline device
[ 790.139174] sd 6:0:0:0: rejecting I/O to offline device
[ 790.139263] sd 6:0:0:0: rejecting I/O to offline device
[ 790.139341] sd 6:0:0:0: rejecting I/O to offline device
[ 790.139744] sd 6:0:0:0: rejecting I/O to offline device
[ 790.139826] sd 6:0:0:0: rejecting I/O to offline device
[ 790.139903] sd 6:0:0:0: rejecting I/O to offline device
[ 790.139980] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140064] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140141] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140223] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140301] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140379] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140459] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140536] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140613] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140690] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140767] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140844] sd 6:0:0:0: rejecting I/O to offline device
[ 790.140922] sd 6:0:0:0: rejecting I/O to offline device
[ 790.141265] sd 6:0:0:0: rejecting I/O to offline device
[ 790.141351] sd 6:0:0:0: rejecting I/O to offline device
[ 790.141429] sd 6:0:0:0: rejecting I/O to offline device
[ 790.141506] sd 6:0:0:0: rejecting I/O to offline device
[ 790.141583] sd 6:0:0:0: rejecting I/O to offline device
[ 790.141660] sd 6:0:0:0: rejecting I/O to offline device
[ 790.141737] sd 6:0:0:0: rejecting I/O to offline device
[ 790.141813] sd 6:0:0:0: rejecting I/O to offline device
[ 790.141890] sd 6:0:0:0: rejecting I/O to offline device
[ 790.141967] sd 6:0:0:0: rejecting I/O to offline device
** Affects: linux-source-2.6.22 (Ubuntu)
Importance: Undecided
Status: New
--
USB camera is not automatically mounted
https://bugs.launchpad.net/bugs/157700
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
