** Description changed: SRU Justification: ------------------ Impact: Wi-Fi access point isn’t visible to outside devices after reboot Test Case: Configure Wi-Fi AP using setup wizard: $ sudo wifi-ap.setup-wizard Check configured AP settings: $ sudo wifi-ap.config get debug: false dhcp.lease-time: 12h dhcp.range-start: 10.0.60.2 dhcp.range-stop: 10.0.60.200 disabled: false share.disabled: false share.network-interface: wlan0 wifi.address: 10.0.60.1 wifi.channel: 6 wifi.country-code: wifi.hostapd-driver: nl80211 wifi.interface: wlan0 wifi.interface-mode: direct wifi.netmask: ff000000 wifi.operation-mode: g wifi.security: wpa2 wifi.security-passphrase: some-password wifi.ssid: dell-gateway + Check in third-party stations. SSID is invisible. + Restart AP and check its status: $ sudo wifi-ap.status restart-ap Check status of AP. It is showing true. $ sudo wifi-ap.status ap.active: true - At this point, Wi-Fi access point is not visible. + At this point also, Wi-Fi access point is not visible. Fix: - Power save is not enabled in AP mode and modified the same in source code. + Power save is enabled in AP mode. it must be disabled. Regression potential: Ran "wifi-ap.status restart-ap" command in every 1 minute and observed whether it is visible to third party devices are not. And it is behaving as expected. This patch is for tracking only, please don't triage.
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1773400 Title: Redpine: wifi-ap stopped working after restart To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1773400/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
