Public bug reported: Hi all, odd issue and I would like to know if I am the only one with this. I have been uploading sketches with arduino 1.8.6 on my linux box (ubuntu 16.xx,17.xx and 18.04) with no problem (uno, mega and leonardo). Now since I upgraded to ubuntu 18.10 no joy for leonardo anymore! I am still able to upload to Uno and Mega though. I did not change the arduino toolchain at all, only the rest was upgraded. I suspect a problem with the new CDC driver. In any case this is the log:
avrdude: Version 6.3-20171130 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch System wide configuration file is "/home/emmanuel/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino14/etc/avrdude.conf" User configuration file is "/home/emmanuel/.avrduderc" User configuration file does not exist or is not a regular file, skipping Using Port : /dev/ttyACM1 Using Programmer : avr109 Overriding Baud Rate : 57600 AVR Part : ATmega32U4 Chip Erase delay : 9000 us PAGEL : PD7 BS2 : PA0 RESET disposition : dedicated RETRY pulse : SCK serial program mode : yes parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 ByteDelay : 0 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 65 20 4 0 no 1024 4 0 9000 9000 0x00 0x00 flash 65 6 128 0 yes 32768 128 256 4500 4500 0x00 0x00 lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 Programmer Type : butterfly Description : Atmel AppNote AVR109 Boot Loader Connecting to programmer: . Found programmer: Id = "CATERIN"; type = S Software Version = 1.0; No Hardware Version given. Programmer supports auto addr increment. Programmer supports buffered memory access with buffersize=128 bytes. Programmer supports the following devices: Device code: 0x44 avrdude: devcode selected: 0x44 avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.00s avrdude: Device signature = 0x1e9587 (probably m32u4) avrdude: reading input file "/tmp/arduino_build_164818/RR-duino.ino.hex" avrdude: writing flash (18572 bytes): Writing | avrdude: butterfly_recv(): programmer is not responding avrdude: error: programmer did not respond to command: write block ***failed; ***failed; repeated a lot and then several: avrdude: Error: butterfly programmer uses avr_write_page() but does not provide a cmd() method. *** page 127 (addresses 0x0000 - 0x007f) failed to write with different page numbers BTW I can still upload sketches to my leonardo on another linux box, but first I have to reflash the bootloader (that I can do on the problematic linux box via a tinyUSB !!) Anyone could help pls? TIA Manu ** Affects: avrdude (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1806768 Title: cannot upload to arduino leaonardo anymore with cosmic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/avrdude/+bug/1806768/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs