I also face the same problem. As of now, I have found no stable
solution.
The boot from grub menu to the login screen is fast. But GDM takes too
long to load.
I notice the following:
1. GDM loads only nautilus of late. It used to load several other components as
well. Is something broken? How do I know and what file do I attach as a report
for this?
2. gnome-panel does not start at all. It is frustrating that it does not start
at all. I wonder if you people face this or not. Let me explain. I am currently
using Compiz-Fusion and full effect. But that does not seem to matter at all.
This problem has been there ever since.
3. I had run into another problem prior to this: device-mapper: table: 254:1:
linear: dm-linear: Device lookup failed which keeps getting spammed on my tty
screen and prevents gnome from loading properly. I noticed this by pressing
Ctrl+Alt+F1. So I uninstalled evms as has been suggested in other bugs: eg:
Bug# 115616 in linux-source-2.6.22 However, this problem does not seem to have
gone at all.
4. I have tried this several times now and am actually scared to shut down my
laptop since I am completely uncertain if it will reload. In fact, Pidgin loads
automatically since I have it on the session start-up programs list. This time
around I was saved because for some reason Gutsy was kind enough to give me a
terminal at start-up by default. I loaded Firefox through that. I am a normal
user and so don't know the command name to start the gnome panel. I searched on
the net and found that it is 'gnome-panel'. Note that I am also a contributor
to the CPAN pages and also contribute some software to the community. I still
don't know all Linux commands. I completely disagree that a hacker must be
knowing everything about this and this problem is simply bugging. I as even a
hacker (I hacked several problems for my mom and dad at home on Dapper) think
that sometimes the hacker community acts way too arrogantly in dealing with
problems. Instead of helping people by using their expertise they expect people
to do some debugging, but how will they do it if they don't know where to look
for error messages at all!!? In this particular case for example, NO ERROR
MESSAGE IS FLAGGED BY ANY PROGRAM except security modules. I ONLY FIND SOME
ERRORS IN THE .xsession-errors BUT THAT IS A KNOWN BUG IN GTK+ and some
messages in dmesg. There is nothing apparent at all that I can figure that is
directly liked with GNOME-panel, but for some reason gnome is broken. This is
an emergency problem and not something that needs 1000 confirmations before
some hacker begins solving it. That way we will never have a solution.
5. I have not installed anything new. If Ubuntu installed something in the
process of having installed Gutsy Gibbon I am not responsible and that is the
sole responsibility of the developers. I myself am a developer of some
Electrical Engineering CAD tools, but NEVER EVER release a new version without
having had complete confidence on it. This is totally irresponsible of
Canonical to have released a version of Ubuntu without any proper solution to
these problems with GNOME.
6. I recreated the initramfs linux image for my platform. The output of my
'uname -r' : 2.6.22-14-386. This problem has not gone still.
Summary:
HP: V6102AU
Everything on this works so far, except GNOME which breaks very often.
VERY HIGHLY CRITICAL
Inform me of the report files you need.
dmesg output:
[ 0.000000] Linux version 2.6.22-14-386 ([EMAIL PROTECTED]) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 Sun Oct 14 22:36:54
GMT 2007 (Ubuntu 2.6.22-14.46-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003df00000 (usable)
[ 0.000000] BIOS-e820: 000000003df00000 - 000000003df17000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003df17000 - 000000003df80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003df80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 95MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f89d0
[ 0.000000] Entering add_active_range(0, 0, 253696) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 253696
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 253696
[ 0.000000] On node 0 totalpages: 253696
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 190 pages used for memmap
[ 0.000000] HighMem zone: 24130 pages, LIFO batch:3
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F89A0 checksum 0
[ 0.000000] ACPI: RSDP 000F89A0, 0014 (r0 HP )
[ 0.000000] ACPI: RSDT 3DF0FB99, 0038 (r1 HP RSDT 6040000 LTP
0)
[ 0.000000] ACPI: FACP 3DF16D52, 0074 (r1 HP MCP51M 6040000 PTL_
F4240)
[ 0.000000] ACPI: DSDT 3DF0FBD1, 7181 (r1 HP MCP51M 6040000 MSFT
100000E)
[ 0.000000] ACPI: FACS 3DF17FC0, 0040
[ 0.000000] ACPI: SSDT 3DF16DC6, 0182 (r1 HP POWERNOW 6040000 LTP
1)
[ 0.000000] ACPI: MCFG 3DF16F48, 003C (r1 HP MCFG 6040000 LTP
0)
[ 0.000000] ACPI: APIC 3DF16F84, 0054 (r1 HP APIC 6040000 LTP
0)
[ 0.000000] ACPI: BOOT 3DF16FD8, 0028 (r1 HP $SBFTBL$ 6040000 LTP
1)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:8 APIC version 16
[ 0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: nVIDIA Product ID: C51-MCP51 APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 251714
[ 0.000000] Kernel command line:
root=UUID=c7e91ba1-35fa-4431-ae80-ea1a30d5bdfa ro quiet splash noapic vga=792
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1607.414 MHz processor.
[ 14.929541] spurious 8259A interrupt: IRQ7.
[ 14.929566] Console: colour dummy device 80x25
[ 14.929924] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 14.930581] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 14.950228] Memory: 993992k/1014784k available (1929k kernel code, 20100k
reserved, 877k data, 348k init, 97280k highmem)
[ 14.950240] virtual kernel memory layout:
[ 14.950241] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB)
[ 14.950243] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.950245] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 14.950246] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 14.950248] .init : 0xc03c0000 - 0xc0417000 ( 348 kB)
[ 14.950249] .data : 0xc02e25d5 - 0xc03bda04 ( 877 kB)
[ 14.950251] .text : 0xc0100000 - 0xc02e25d5 (1929 kB)
[ 14.950254] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 14.950302] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1,
Nodes=1
[ 15.030319] Calibrating delay using timer specific routine.. 3217.60
BogoMIPS (lpj=6435208)
[ 15.030344] Security Framework v1.0.0 initialized
[ 15.030350] SELinux: Disabled at boot.
[ 15.030356] Mount-cache hash table entries: 512
[ 15.030451] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000
00000000 00002001 00000000 0000001f
[ 15.030459] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.030462] CPU: L2 Cache: 256K (64 bytes/line)
[ 15.030464] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410
00002001 00000000 0000001f
[ 15.030475] Compat vDSO mapped to ffffe000.
[ 15.030484] CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
[ 15.030489] Checking 'hlt' instruction... OK.
[ 15.046841] Early unpacking initramfs... done
[ 15.439164] ACPI: Core revision 20070126
[ 15.439241] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 15.441455] ACPI: setting ELCR to 0200 (from 0ca0)
[ 15.500149] Booting paravirtualized kernel on bare hardware
[ 15.500226] Time: 4:29:28 Date: 10/11/107
[ 15.500247] NET: Registered protocol family 16
[ 15.500317] EISA bus registered
[ 15.500332] ACPI: bus type pci registered
[ 15.515837] PCI: BIOS BUG #81[49435000] found
[ 15.515842] PCI: Using configuration type 1
[ 15.515844] Setting up standard PCI resources
[ 15.517605] ACPI: EC: Look up EC in DSDT
[ 15.517907] ACPI: EC: GPE=0x10, ports=0x66, 0x62
[ 15.519535] ACPI: Interpreter enabled
[ 15.519538] ACPI: (supports S0 S3 S4 S5)
[ 15.519553] ACPI: Using PIC for interrupt routing
[ 15.525794] ACPI: EC: GPE=0x10, ports=0x66, 0x62
[ 15.525846] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.525854] PCI: Probing PCI hardware (bus 00)
[ 15.526996] PCI: Transparent bridge - 0000:00:10.0
[ 15.527024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.527123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 15.527154] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 15.527185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 15.558131] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.558311] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[ 15.558476] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
[ 15.558639] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.558801] ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.558963] ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.559126] ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 9 10 *11 14 15)
[ 15.559288] ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.559451] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 15.559614] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15)
[ 15.559777] ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 9 10 *11 14 15)
[ 15.559939] ACPI: PCI Interrupt Link [LUS2] (IRQs 5 *7 9 10 11 14 15)
[ 15.560101] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 15.560263] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.560425] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.560586] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.560748] ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.560919] ACPI: PCI Interrupt Link [LTID] (IRQs *5 7 9 10 11 14 15)
[ 15.561082] ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 9 *10 11 14 15)
[ 15.561167] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.561177] pnp: PnP ACPI init
[ 15.561186] ACPI: bus type pnp registered
[ 15.563390] pnp: PnP ACPI: found 11 devices
[ 15.563392] ACPI: ACPI bus type pnp unregistered
[ 15.563396] PnPBIOS: Disabled by ACPI PNP
[ 15.563442] PCI: Using ACPI for IRQ routing
[ 15.563446] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 15.563533] NET: Registered protocol family 8
[ 15.563535] NET: Registered protocol family 20
[ 15.563587] pnp: 00:00: iomem range 0xffc00000-0xffffffff could not be
reserved
[ 15.563591] pnp: 00:00: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 15.563595] pnp: 00:00: iomem range 0xfee00000-0xfeefffff could not be
reserved
[ 15.563598] pnp: 00:00: iomem range 0x0-0x0 could not be reserved
[ 15.563604] pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 15.563610] pnp: 00:03: ioport range 0x1000-0x107f has been reserved
[ 15.563613] pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
[ 15.563616] pnp: 00:03: ioport range 0x1400-0x147f has been reserved
[ 15.563619] pnp: 00:03: ioport range 0x1480-0x14ff has been reserved
[ 15.563622] pnp: 00:03: ioport range 0x1800-0x187f has been reserved
[ 15.563626] pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
[ 15.563629] pnp: 00:03: ioport range 0x2000-0x203f has been reserved
[ 15.566277] Time: tsc clocksource has been installed.
[ 15.593889] PCI: Bridge: 0000:00:02.0
[ 15.593892] IO window: 4000-4fff
[ 15.593896] MEM window: b3000000-b31fffff
[ 15.593899] PREFETCH window: d0000000-d01fffff
[ 15.593902] PCI: Bridge: 0000:00:03.0
[ 15.593903] IO window: disabled.
[ 15.593906] MEM window: b3200000-b33fffff
[ 15.593909] PREFETCH window: disabled.
[ 15.593912] PCI: Bridge: 0000:00:10.0
[ 15.593913] IO window: disabled.
[ 15.593917] MEM window: b3400000-b34fffff
[ 15.593920] PREFETCH window: disabled.
[ 15.593932] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 15.593938] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 15.593946] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 15.593958] NET: Registered protocol family 2
[ 15.630293] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.630392] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 15.631265] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.631501] TCP: Hash tables configured (established 131072 bind 65536)
[ 15.631504] TCP reno registered
[ 15.642398] checking if image is initramfs... it is
[ 16.242255] Switched to high resolution mode on CPU 0
[ 16.558558] Freeing initrd memory: 7800k freed
[ 16.558640] Simple Boot Flag at 0x36 set to 0x1
[ 16.558885] audit: initializing netlink socket (disabled)
[ 16.558897] audit(1194755369.552:1): initialized
[ 16.558945] highmem bounce pool size: 64 pages
[ 16.560498] VFS: Disk quotas dquot_6.5.1
[ 16.560512] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.560597] io scheduler noop registered
[ 16.560599] io scheduler anticipatory registered
[ 16.560601] io scheduler deadline registered
[ 16.560618] io scheduler cfq registered (default)
[ 16.560634] Boot video device is 0000:00:05.0
[ 16.778203] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 16.778225] assign_interrupt_mode Found MSI capability
[ 16.778228] Allocate Port Service[0000:00:02.0:pcie00]
[ 16.778282] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 16.778302] assign_interrupt_mode Found MSI capability
[ 16.778305] Allocate Port Service[0000:00:03.0:pcie00]
[ 16.778406] isapnp: Scanning for PnP cards...
[ 17.131469] isapnp: No Plug & Play device found
[ 17.153299] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 17.154325] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 17.154491] input: Macintosh mouse button emulation as /class/input/input0
[ 17.154553] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64
irq 1,12
[ 17.171089] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.171094] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.171235] mice: PS/2 mouse device common for all mice
[ 17.172153] EISA: Probing bus 0 at eisa.0
[ 17.172159] Cannot allocate resource for EISA slot 1
[ 17.172162] Cannot allocate resource for EISA slot 2
[ 17.172164] Cannot allocate resource for EISA slot 3
[ 17.172166] Cannot allocate resource for EISA slot 4
[ 17.172179] EISA: Detected 0 cards.
[ 17.172262] TCP cubic registered
[ 17.172272] NET: Registered protocol family 1
[ 17.172292] Using IPI Shortcut mode
[ 17.172463] Magic number: 15:204:464
[ 17.172812] Freeing unused kernel memory: 348k freed
[ 17.210099] input: AT Translated Set 2 keyboard as /class/input/input1
[ 18.459381] AppArmor: AppArmor initialized<5>audit(1194755371.452:2):
type=1505 info="AppArmor initialized" pid=1356
[ 18.468966] fuse init (API version 7.8)
[ 18.475604] Failure registering capabilities with primary security module.
[ 18.494057] ACPI: Thermal Zone [THRM] (63 C)
[ 18.510096] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
[EMAIL PROTECTED]
[ 18.529841] md: linear personality registered for level -1
[ 18.538077] md: multipath personality registered for level -4
[ 18.543306] md: raid0 personality registered for level 0
[ 18.548879] md: raid1 personality registered for level 1
[ 18.553910] raid5: automatically using best checksumming function: pIII_sse
[ 18.573867] pIII_sse : 4887.000 MB/sec
[ 18.573870] raid5: using function: pIII_sse (4887.000 MB/sec)
[ 18.641891] raid6: int32x1 679 MB/s
[ 18.709916] raid6: int32x2 696 MB/s
[ 18.777920] raid6: int32x4 587 MB/s
[ 18.845959] raid6: int32x8 424 MB/s
[ 18.913862] raid6: mmxx1 1277 MB/s
[ 18.981840] raid6: mmxx2 2341 MB/s
[ 19.049819] raid6: sse1x1 1292 MB/s
[ 19.117821] raid6: sse1x2 2162 MB/s
[ 19.185790] raid6: sse2x1 2173 MB/s
[ 19.253775] raid6: sse2x2 2992 MB/s
[ 19.253778] raid6: using algorithm sse2x2 (2992 MB/s)
[ 19.253781] md: raid6 personality registered for level 6
[ 19.253783] md: raid5 personality registered for level 5
[ 19.253785] md: raid4 personality registered for level 4
[ 19.287661] md: raid10 personality registered for level 10
[ 20.100604] usbcore: registered new interface driver usbfs
[ 20.100628] usbcore: registered new interface driver hub
[ 20.100648] usbcore: registered new device driver usb
[ 20.101354] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 20.101674] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
[ 20.101678] PCI: setting IRQ 11 as level-triggered
[ 20.101682] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 11
(level, low) -> IRQ 11
[ 20.101694] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 20.101698] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 20.101832] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus
number 1
[ 20.101849] ohci_hcd 0000:00:0b.0: irq 11, io mem 0xb0004000
[ 20.124239] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.124244] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 20.157941] SCSI subsystem initialized
[ 20.163018] libata version 2.21 loaded.
[ 20.223825] usb usb1: configuration #1 chosen from 1 choice
[ 20.223852] hub 1-0:1.0: USB hub found
[ 20.223863] hub 1-0:1.0: 8 ports detected
[ 20.309679] forcedeth.c: Reverse Engineered nForce ethernet driver. Version
0.60.
[ 20.325782] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 20.325801] NFORCE-MCP51: chipset revision 241
[ 20.325804] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 20.325808] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling
workaround.
[ 20.325813] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
[ 20.325821] ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA,
hdb:pio
[ 20.325832] Probing IDE interface ide0...
[ 20.629611] usb 1-3: new full speed USB device using ohci_hcd and address 2
[ 20.850717] usb 1-3: configuration #1 chosen from 1 choice
[ 21.061648] hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
[ 21.157535] usb 1-6: new low speed USB device using ohci_hcd and address 3
[ 21.372644] usb 1-6: configuration #1 chosen from 1 choice
[ 21.398825] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 21.407358] sata_nv 0000:00:0e.0: version 3.4
[ 21.407373] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
[ 21.407636] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 5
[ 21.407640] PCI: setting IRQ 5 as level-triggered
[ 21.407644] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 5
(level, low) -> IRQ 5
[ 21.407683] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 21.407747] scsi0 : sata_nv
[ 21.407986] scsi1 : sata_nv
[ 21.408180] ata1: SATA max UDMA/133 cmd 0x000130c0 ctl 0x000130b6 bmdma
0x00013090 irq 5
[ 21.408185] ata2: SATA max UDMA/133 cmd 0x000130b8 ctl 0x000130b2 bmdma
0x00013098 irq 5
[ 21.418185] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
[ 21.418193] Uniform CD-ROM driver Revision: 3.20
[ 21.873452] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 21.881619] ata1.00: ATA-7: ST9100824AS, 7.24, max UDMA/100
[ 21.881622] ata1.00: 195371568 sectors, multi 16: LBA48
[ 21.897612] ata1.00: configured for UDMA/100
[ 22.209394] ata2: SATA link down (SStatus 0 SControl 300)
[ 22.220069] scsi 0:0:0:0: Direct-Access ATA ST9100824AS 7.24
PQ: 0 ANSI: 5
[ 22.220824] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 7
[ 22.220828] PCI: setting IRQ 7 as level-triggered
[ 22.220833] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 7
(level, low) -> IRQ 7
[ 22.220844] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 22.220848] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 22.221063] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus
number 2
[ 22.221095] ehci_hcd 0000:00:0b.1: debug port 1
[ 22.221099] PCI: cache line size of 64 is not supported by device
0000:00:0b.1
[ 22.221108] ehci_hcd 0000:00:0b.1: irq 7, io mem 0xb0005000
[ 22.221118] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 22.221167] usb 1-3: USB disconnect, address 2
[ 22.223878] usb usb2: configuration #1 chosen from 1 choice
[ 22.224084] hub 2-0:1.0: USB hub found
[ 22.224093] hub 2-0:1.0: 8 ports detected
[ 22.237449] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 22.237487] sd 0:0:0:0: [sda] Write Protect is off
[ 22.237490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.237526] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 22.237576] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 22.237584] sd 0:0:0:0: [sda] Write Protect is off
[ 22.237587] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.237598] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 22.237603] sda: sda1 sda2 < sda5 >
[ 22.278010] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.283057] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.325833] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
[ 22.325837] PCI: setting IRQ 10 as level-triggered
[ 22.325842] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 10
(level, low) -> IRQ 10
[ 22.375601] usb 1-6: USB disconnect, address 3
[ 22.377814] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]
MMIO=[b3400000-b34007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 22.382243] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10
[ 22.382247] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 10
(level, low) -> IRQ 10
[ 22.382253] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 22.382261] forcedeth: using HIGHDMA
[ 22.679107] kjournald starting. Commit interval 5 seconds
[ 22.679117] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.901586] eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0
[ 23.229258] usb 1-3: new full speed USB device using ohci_hcd and address 4
[ 23.459368] usb 1-3: configuration #1 chosen from 1 choice
[ 23.653355] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc000838cac00]
[ 23.765192] usb 1-6: new low speed USB device using ohci_hcd and address 5
[ 23.980291] usb 1-6: configuration #1 chosen from 1 choice
[ 38.555912] Linux agpgart interface v0.102 (c) Dave Jones
[ 38.595163] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 38.595193] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 38.737495] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.784468] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.820608] nvidia: module license 'NVIDIA' taints kernel.
[ 39.099874] NET: Registered protocol family 17
[ 39.281230] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 11
[ 39.281235] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 11
(level, low) -> IRQ 11
[ 39.281243] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 39.281479] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep
12 14:12:24 PDT 2007
[ 40.197780] input: PC Speaker as /class/input/input2
[ 40.237051] Bluetooth: Core ver 2.11
[ 40.237091] NET: Registered protocol family 31
[ 40.237094] Bluetooth: HCI device and connection manager initialized
[ 40.237097] Bluetooth: HCI socket layer initialized
[ 40.288192] ieee80211_crypt: registered algorithm 'NULL'
[ 40.332115] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 40.332119] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL
PROTECTED]>
[ 40.393984] Bluetooth: HCI USB driver ver 2.9
[ 40.396247] usbcore: registered new interface driver hci_usb
[ 40.405691] Real Time Clock Driver v1.12ac
[ 40.565960] sdhci: Secure Digital Host Controller Interface driver
[ 40.565964] sdhci: Copyright(c) Pierre Ossman
[ 40.566005] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev
19)
[ 40.566289] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[ 40.566292] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 11
(level, low) -> IRQ 11
[ 40.566357] mmc0: SDHCI at 0xb3400800 irq 11 DMA
[ 40.714042] usbcore: registered new interface driver hiddev
[ 40.720153] input: Microsoft Microsoft(R) Compact Optical Mouse as
/class/input/input3
[ 40.720216] input: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact
Optical Mouse] on usb-0000:00:0b.0-6
[ 40.720229] usbcore: registered new interface driver usbhid
[ 40.720233]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 40.767494] bcm43xx driver
[ 40.767856] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 9
[ 40.767859] PCI: setting IRQ 9 as level-triggered
[ 40.767863] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 9
(level, low) -> IRQ 9
[ 40.767873] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 41.232506] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps:
0xa04713/0x200000
[ 41.293753] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 42.154419] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
[ 42.154424] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 10
(level, low) -> IRQ 10
[ 42.154441] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 42.904048] lp: driver loaded but no devices found
[ 43.107945] ndiswrapper version 1.45 loaded (smp=no)
[ 43.172733] usbcore: registered new interface driver ndiswrapper
[ 43.926544] EXT3 FS on sda1, internal journal
[ 44.657061] NET: Registered protocol family 10
[ 44.657152] lo: Disabled Privacy Extensions
[ 50.285758] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology
TL-50 processors (version 2.00.00)
[ 50.285789] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13
[ 50.285791] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 50.539279] ACPI: AC Adapter [ACAD] (on-line)
[ 50.590582] ACPI: Battery Slot [BAT0] (battery present)
[ 50.608898] No dock devices found.
[ 50.692588] input: Power Button (FF) as /class/input/input5
[ 50.696784] ACPI: Power Button (FF) [PWRF]
[ 50.740618] input: Power Button (CM) as /class/input/input6
[ 50.744661] ACPI: Power Button (CM) [PWRB]
[ 50.790873] input: Sleep Button (CM) as /class/input/input7
[ 50.794946] ACPI: Sleep Button (CM) [SLPB]
[ 50.839401] input: Lid Switch as /class/input/input8
[ 50.843454] ACPI: Lid Switch [LID]
[ 50.942797] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 50.942923] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 53.659386] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 55.488983] eth0: no IPv6 routers present
[ 56.368112] ppdev: user-space parallel port driver
[ 56.833361] audit(1194755410.127:3): type=1503 operation="inode_permission"
requested_mask="a" denied_mask="a" name="/dev/tty" pid=8006
profile="/usr/sbin/cupsd"
[ 57.017362] apm: BIOS not found.
[ 48.096000] Marking TSC unstable due to: cpufreq changes.
[ 48.100000] Time: acpi_pm clocksource has been installed.
[ 48.588000] Clocksource tsc unstable (delta = -248005825 ns)
[ 51.112000] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
[ 51.252000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 51.276000] NFSD: starting 90-second grace period
[ 96.412000] spurious 8259A interrupt: IRQ15.
[ 119.724000] Bluetooth: L2CAP ver 2.8
[ 119.724000] Bluetooth: L2CAP socket layer initialized
[ 119.820000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 120.348000] Bluetooth: RFCOMM socket layer initialized
[ 120.348000] Bluetooth: RFCOMM TTY layer initialized
[ 120.348000] Bluetooth: RFCOMM ver 1.8
[ 163.796000] Failure registering capabilities with primary security module.
--
[Gutsy] GNOME takes too much time to load during system boot
https://bugs.launchpad.net/bugs/151544
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
