Public bug reported: Ok, I removed Windows XP Pro from my pc after using the Feisty Fawn Live Dvd for about a month. Using it, all my hardware worked (2 IDE hdd connected to Mb<Master & Slave>, 2 Sata hdd connected to 2 ports on Mb plus 1 Sata hdd connected to Highpoint 1540 4 port Sata interface card, 1 Asus DVD Writer.) Motherboard is Asus A7N8X Deluxe. I took the plunge because after using it, I felt that Ubuntu was a far superior OS to the XP Pro that I was using and that since everything worked, there would be no real risk involved in cutting myself lose from the MS yoke. I wiped and formated the 10gb IDE system drive that I used for XP and installed Feisty on to it, all went smoothly..... until I did a reboot into what I thought would be my brand new, installed ubuntu system; It didnt.
I then posted this on Ubuntu questions in launchpad: https://answers.launchpad.net/ubuntu/+question/12661 "have tried now for over a week to get a fresh install of ubuntu 7.04 to boot on my hard drive. I initially used a 10.1 IBM hdd which was my old windows xp system drive. I completely raw partitioned it and installed feisty from the live cd and the installation went without a hitch, until the reboot!. the pc gets to the splash screen and then just freeezes. I get the same with recovery boot.... no error message it just stops. I have tried installing server, text mode, and command line and all of them just freeze shortly after saying its loading. In desperation I went out and bought a new 160gb maxtor drive and installed feisty to that but with the same result, it just hangs at the splash screen never to move again. The thing is, everythig works great from the cd version(and the dvd version, but it just wont work when installed to the hard drive. I am at my wits end as I have already removed windows xp from my pc and dont want to go back to it. Please can someone help me to get 7.04 running on my hard drive as I have invested both time and money in this and I really want it to work, but from my hard drive,not the cd. I tried debug mode but it still just hangs, either at the splash screen or in recovery mode, both without an error message. the thing is, it installs to the drive great, with no errors, it just wont start up properly on the hdd. Help! Please!" I got few replies and had lost a lot of sleep when I reached this point..... Eureka! I have solved the problem ubuntu is no installed on my new hard drive. I think the developers need to look at this problem though as it was only after trying to use a PC Linux live cd that I got a proper pointer to the problem. Unlike the Ubuntu 7.04 Live Cd which loads and runs flawlessly on my pc, the PC Linux one would not load up in any mode... it just crashed after picking any loadup option. When I used the v switch I say a line that said "nforce2 not in 100% native mode" and this was the clue I needed to try adn solve the install and bootup problem. My problem with the Ubuntu install stemmed from the fact that I wasnt getting an undestandable error message from Ubuntu when it kept on locking up on boot. When the splash and quiet was removed from the kernel boot line (or recovery mode was used) the only message I got was "hpt37xxx has no clock data saved from bios", which told me nothing and besides it then went on for about five lines after that, all about PIO modes for various hard drives. PC Linux's "nforce2 not in 100% native mode" was more informative to me as it told me that perhaps it was something not native to the NForce2 that was the problem and so it proved. I took both sata drives and plugged them into the motherboard, and the one remaining sata drive plugged into my HighPoint 1540 4port Sata interface card, I removed (I didnt remove the card although that would have been the next step.) The PC Linux live cd booted up fine after that with no errors so, I reinstalled Ubuntu with the drive not connected to the Sata interface card, and yes you guessed it, when I booted up from the hard drive it worked first time and pretty soon the login screen was there!!! :) So my options now are to see if there is a fix for the incompatability with the HighPoint 1540 4 port Sata interface card and apply it, if not then it will have to be a new motherboard with more "native" sata ports as I need the use of that drive and ubuntu will not recognize it even if I hot plug it in after boot-up. Many thanks to all who tried to solve my problem and especially to Mike Ocran. If he didnt give me the PC Linux live cd to try I dont know when if ever, I would have got Ubuntu to run from my hard drive. Future Ubuntu releases could learn from this.... the PC Linux Live CD wouldnt run with the problem it saw with the interface card (kudos to Ubuntu for being able to bypas that problem and load normally), however its reporting of a problem was clear enough to indicate where the problem might lie, unlike Ubuntu's "hpt37xxx has no clock data saved from bios" which told me nothing. Perhaps if the Ubuntu Live CD had not loaded up on my pc but had given me the message the PC Linux one did, I would have got the solution much sooner. However the problem is still not solved. I can boot up feisty and now gutsy from my hard drive as long as I do not plug the SATA hdd into port 1 or 2 of the Highpoint 1540 sata interface card, if I do, I get the same problem. If I plug the drive into ports 3 or 4 then the OS will boot, however I cannot see the drive or access its contents. I have tried the gutsy live cd and here I get a different problem. Once logged in I can see the drive but I cannot access its contents so what has changed between the Feisty Live DVD and the Gusty Live Cd to cause this. If I could lift the feisty DVD setup and put it on my hard drive then I would do that and be done with gutsy, for at least I know that the feisty Live Dvd environment works but I dont know how. I will post below the dmesg that I get from my current installation of gutsy along with my gutsy fstab contents. I will then boot into the feisty live DvD environment and post the same. Perhaps someone will be able to tell me how to get my drive working when I boot from my hard drive and not the DVD. One other thing, my interface card is a HPT374 SATA device but it seems to be using a HPT366 driver which is trying to set up my Sata hdd as Ide drive, which it is not. Here are the files......... [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F75F0 checksum 0 [ 0.000000] ACPI: RSDP 000F75F0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FFF30C0, 43E7 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF74C0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Built 1 zonelists. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=a3e58666-62ca-406b-bbfc-c843c9a9b239 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2088.125 MHz processor. [ 43.167630] Console: colour VGA+ 80x25 [ 43.168193] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 43.168664] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 43.195911] Memory: 1027620k/1048512k available (2015k kernel code, 20104k reserved, 916k data, 364k init, 131008k highmem) [ 43.195921] virtual kernel memory layout: [ 43.195922] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 43.195923] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 43.195925] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 43.195926] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 43.195927] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 43.195928] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 43.195930] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 43.195933] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 43.195976] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 43.275935] Calibrating delay using timer specific routine.. 4179.47 BogoMIPS (lpj=8358952) [ 43.275968] Security Framework v1.0.0 initialized [ 43.275975] SELinux: Disabled at boot. [ 43.275991] Mount-cache hash table entries: 512 [ 43.276137] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [ 43.276147] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 43.276149] CPU: L2 Cache: 512K (64 bytes/line) [ 43.276152] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 [ 43.276163] Compat vDSO mapped to ffffe000. [ 43.276176] Checking 'hlt' instruction... OK. [ 43.292062] SMP alternatives: switching to UP code [ 43.292331] Freeing SMP alternatives: 11k freed [ 43.292644] Early unpacking initramfs... done [ 43.590836] ACPI: Core revision 20070126 [ 43.590921] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 43.593713] CPU0: AMD Athlon(tm) XP 2800+ stepping 00 [ 43.593733] Total of 1 processors activated (4179.47 BogoMIPS). [ 43.593930] ENABLING IO-APIC IRQs [ 43.594122] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 43.739639] Brought up 1 CPUs [ 43.739762] Booting paravirtualized kernel on bare hardware [ 43.739827] Time: 11:36:58 Date: 10/11/107 [ 43.739851] NET: Registered protocol family 16 [ 43.739941] EISA bus registered [ 43.739954] ACPI: bus type pci registered [ 43.771908] PCI: PCI BIOS revision 2.10 entry at 0xfb470, last bus=3 [ 43.771911] PCI: Using configuration type 1 [ 43.771912] Setting up standard PCI resources [ 43.779466] ACPI: EC: Look up EC in DSDT [ 43.783880] ACPI: Interpreter enabled [ 43.783883] ACPI: (supports S0 S1 S3 S4 S5) [ 43.783899] ACPI: Using IOAPIC for interrupt routing [ 43.791299] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 43.791308] PCI: Probing PCI hardware (bus 00) [ 43.791381] PCI: nForce2 C1 Halt Disconnect fixup [ 43.792404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 43.792546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 43.792749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 43.792835] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT] [ 43.840829] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 43.840963] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 43.841094] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 43.841224] ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 43.841353] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 43.841484] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 43.841614] ACPI: PCI Interrupt Link [LUBB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 43.841748] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 43.841879] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 43.842009] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 43.842142] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 43.842279] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 43.842413] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 43.842544] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 43.842677] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 43.842810] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 43.842925] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 43.843035] ACPI: PCI Interrupt Link [APC2] (IRQs *17) [ 43.843136] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 43.843237] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 43.843337] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 43.843485] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 43.843636] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 43.843783] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. [ 43.843929] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0 [ 43.844074] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 43.844219] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 43.844323] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 43.844467] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 43.844613] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 [ 43.844758] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0 [ 43.844904] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 43.844997] Linux Plug and Play Support v0.97 (c) Adam Belay [ 43.845008] pnp: PnP ACPI init [ 43.845016] ACPI: bus type pnp registered [ 43.848546] pnp: PnP ACPI: found 12 devices [ 43.848548] ACPI: ACPI bus type pnp unregistered [ 43.848552] PnPBIOS: Disabled by ACPI PNP [ 43.848604] PCI: Using ACPI for IRQ routing [ 43.848609] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 43.910583] NET: Registered protocol family 8 [ 43.910585] NET: Registered protocol family 20 [ 43.910651] pnp: 00:00: ioport range 0x4000-0x407f has been reserved [ 43.910654] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved [ 43.910657] pnp: 00:00: ioport range 0x4400-0x447f has been reserved [ 43.910660] pnp: 00:00: ioport range 0x4480-0x44ff has been reserved [ 43.910662] pnp: 00:00: ioport range 0x4200-0x427f has been reserved [ 43.910665] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved [ 43.910669] pnp: 00:01: ioport range 0x5000-0x503f has been reserved [ 43.910672] pnp: 00:01: ioport range 0x5500-0x553f has been reserved [ 43.910676] pnp: 00:02: iomem range 0xdb400-0xdbfff has been reserved [ 43.910679] pnp: 00:02: iomem range 0xf0000-0xf7fff could not be reserved [ 43.910682] pnp: 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 43.910685] pnp: 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 43.911468] Time: tsc clocksource has been installed. [ 43.940960] PCI: Bridge: 0000:00:08.0 [ 43.940963] IO window: 9000-cfff [ 43.940968] MEM window: e4000000-e5ffffff [ 43.940973] PREFETCH window: 50000000-500fffff [ 43.940977] PCI: Bridge: 0000:00:0c.0 [ 43.940980] IO window: d000-dfff [ 43.940984] MEM window: e0000000-e1ffffff [ 43.940988] PREFETCH window: 50100000-501fffff [ 43.940993] PCI: Bridge: 0000:00:1e.0 [ 43.940994] IO window: disabled. [ 43.940998] MEM window: e2000000-e3ffffff [ 43.941002] PREFETCH window: d0000000-dfffffff [ 43.941012] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 43.941019] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 43.941033] NET: Registered protocol family 2 [ 43.979465] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 43.979639] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 43.981600] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 43.982340] TCP: Hash tables configured (established 131072 bind 65536) [ 43.982342] TCP reno registered [ 43.991542] checking if image is initramfs... it is [ 44.443084] Switched to high resolution mode on CPU 0 [ 44.561406] Freeing initrd memory: 7238k freed [ 44.561821] audit: initializing netlink socket (disabled) [ 44.561835] audit(1194781018.112:1): initialized [ 44.561899] highmem bounce pool size: 64 pages [ 44.563614] VFS: Disk quotas dquot_6.5.1 [ 44.563668] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 44.563757] io scheduler noop registered [ 44.563760] io scheduler anticipatory registered [ 44.563762] io scheduler deadline registered [ 44.563775] io scheduler cfq registered (default) [ 44.618877] Boot video device is 0000:03:00.0 [ 44.619044] isapnp: Scanning for PnP cards... [ 44.973250] isapnp: No Plug & Play device found [ 44.995765] Real Time Clock Driver v1.12ac [ 44.995867] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 44.996896] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 44.997110] input: Macintosh mouse button emulation as /class/input/input0 [ 44.997177] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 44.997179] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 45.000025] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 45.000031] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 45.000212] mice: PS/2 mouse device common for all mice [ 45.000326] EISA: Probing bus 0 at eisa.0 [ 45.000349] Cannot allocate resource for EISA slot 4 [ 45.000351] Cannot allocate resource for EISA slot 5 [ 45.000366] EISA: Detected 0 cards. [ 45.000461] TCP cubic registered [ 45.000470] NET: Registered protocol family 1 [ 45.000489] Using IPI No-Shortcut mode [ 45.000672] Magic number: 15:602:630 [ 45.001250] Freeing unused kernel memory: 364k freed [ 45.042564] input: AT Translated Set 2 keyboard as /class/input/input1 [ 46.201293] AppArmor: AppArmor initialized<5>audit(1194781019.612:2): type=1505 info="AppArmor initialized" pid=1216 [ 46.209442] fuse init (API version 7.8) [ 46.213822] Failure registering capabilities with primary security module. [ 46.773623] usbcore: registered new interface driver usbfs [ 46.773649] usbcore: registered new interface driver hub [ 46.773672] usbcore: registered new device driver usb [ 46.774326] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 46.774664] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 46.774673] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16 [ 46.774687] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 46.774691] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 46.774865] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 46.774884] ohci_hcd 0000:00:02.0: irq 16, io mem 0xe6084000 [ 46.847121] usb usb1: configuration #1 chosen from 1 choice [ 46.847150] hub 1-0:1.0: USB hub found [ 46.847163] hub 1-0:1.0: 3 ports detected [ 46.857850] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 46.857856] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 46.907061] SCSI subsystem initialized [ 46.911992] libata version 2.21 loaded. [ 46.949295] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 [ 46.949305] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17 [ 46.949322] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 46.949326] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 46.949352] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 46.949369] ohci_hcd 0000:00:02.1: irq 17, io mem 0xe6080000 [ 47.006963] usb usb2: configuration #1 chosen from 1 choice [ 47.006997] hub 2-0:1.0: USB hub found [ 47.007009] hub 2-0:1.0: 3 ports detected [ 47.109239] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 47.109250] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18 [ 47.109263] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 47.109267] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 47.109293] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 47.109332] ehci_hcd 0000:00:02.2: debug port 1 [ 47.109337] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 47.109348] ehci_hcd 0000:00:02.2: irq 18, io mem 0xe6081000 [ 47.252606] usb 1-3: new full speed USB device using ohci_hcd and address 2 [ 47.252629] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 47.252732] usb usb3: configuration #1 chosen from 1 choice [ 47.252766] hub 3-0:1.0: USB hub found [ 47.252775] hub 3-0:1.0: 6 ports detected [ 47.357384] NFORCE2: IDE controller at PCI slot 0000:00:09.0 [ 47.357408] NFORCE2: chipset revision 162 [ 47.357410] NFORCE2: not 100% native mode: will probe irqs later [ 47.357414] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. [ 47.357416] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. [ 47.357422] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller [ 47.357432] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 47.357443] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 47.357452] Probing IDE interface ide0... [ 47.644385] hda: MAXTOR STM3160215A, ATA DISK drive [ 47.924143] hdb: IBM-DTLA-307030, ATA DISK drive [ 47.980707] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 47.983483] Probing IDE interface ide1... [ 48.299703] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 48.514440] usb 2-2: configuration #1 chosen from 1 choice [ 48.719464] hdc: ASUS DRW-1608P3S, ATAPI CD/DVD-ROM drive [ 48.819260] usb 1-3: new full speed USB device using ohci_hcd and address 3 [ 49.200749] usb 1-3: configuration #1 chosen from 1 choice [ 49.213710] usbcore: registered new interface driver hiddev [ 49.223883] input: Dell Dell USB Mouse as /class/input/input2 [ 49.223904] input: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:02.1-2 [ 49.223923] usbcore: registered new interface driver usbhid [ 49.223927] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 49.391015] ide1 at 0x170-0x177,0x376 on irq 15 [ 49.395409] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22 [ 49.395414] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 22 (level, high) -> IRQ 16 [ 49.395421] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 49.447273] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[e6082000-e60827ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 49.452355] HPT374: IDE controller at PCI slot 0000:01:09.0 [ 49.452487] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 49.452494] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 19 [ 49.452504] HPT374: chipset revision 7 [ 49.452519] HPT374: DPLL base: 48 MHz, f_CNT: 127, assuming 33 MHz PCI [ 49.457391] HPT374: using 50 MHz DPLL clock [ 49.457497] HPT374: 100% native mode on irq 19 [ 49.457509] ide2: BM-DMA at 0xa000-0xa007, BIOS settings: hde:pio, hdf:pio [ 49.457532] ide3: BM-DMA at 0xa008-0xa00f, BIOS settings: hdg:pio, hdh:pio [ 49.457555] ACPI: PCI Interrupt 0000:01:09.1[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 19 [ 49.457572] HPT374: no clock data saved by BIOS [ 49.584701] HPT374: DPLL base: 48 MHz, f_CNT: 86, assuming 33 MHz PCI [ 49.589670] HPT374: using 50 MHz DPLL clock [ 49.589777] HPT374: too many IDE interfaces, no room in table [ 49.589781] HPT374: too many IDE interfaces, no room in table [ 49.589783] HPT374: neither IDE port enabled (BIOS) [ 49.589788] Probing IDE interface ide2... [ 49.605373] hda: max request size: 512KiB [ 49.645730] hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100) [ 49.670094] hda: cache flushes supported [ 49.670143] hda: hda1 hda2 < hda5 > [ 49.707199] hdb: max request size: 128KiB [ 49.739106] hdb: 60036480 sectors (30738 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(100) [ 49.739111] hdb: cache flushes not supported [ 49.739130] hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 > [ 49.815674] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66) [ 49.815683] Uniform CD-ROM driver Revision: 3.20 [ 50.158118] Probing IDE interface ide3... [ 50.725749] sata_sil 0000:01:0b.0: version 2.2 [ 50.725984] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 50.725993] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 20 [ 50.726470] scsi0 : sata_sil [ 50.726657] scsi1 : sata_sil [ 50.726779] ata1: SATA max UDMA/100 cmd 0xf883c080 ctl 0xf883c08a bmdma 0xf883c000 irq 20 [ 50.726784] ata2: SATA max UDMA/100 cmd 0xf883c0c0 ctl 0xf883c0ca bmdma 0xf883c008 irq 20 [ 51.249196] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 51.257762] ata1.00: ATA-6: ST3120023AS, 3.01, max UDMA/133 [ 51.257765] ata1.00: 234441648 sectors, multi 16: LBA [ 51.257768] ata1.00: applying bridge limits [ 51.257773] ata1.00: applying Seagate errata fix (mod15write workaround) [ 51.273734] ata1.00: configured for UDMA/100 [ 51.740780] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 51.750535] ata2.00: ATA-6: WDC WD2000JD-00GBB0, 02.05D02, max UDMA/100 [ 51.750538] ata2.00: 390721968 sectors, multi 16: LBA48 [ 51.750540] ata2.00: applying bridge limits [ 51.766503] ata2.00: configured for UDMA/100 [ 51.766614] scsi 0:0:0:0: Direct-Access ATA ST3120023AS 3.01 PQ: 0 ANSI: 5 [ 51.766932] scsi 1:0:0:0: Direct-Access ATA WDC WD2000JD-00G 02.0 PQ: 0 ANSI: 5 [ 51.767560] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 21 [ 51.767565] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [AP3C] -> GSI 21 (level, high) -> IRQ 17 [ 51.767572] 3c59x: Donald Becker and others. [ 51.767577] 0000:02:01.0: 3Com PCI 3c920 Tornado at f884c000. [ 51.801166] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 51.801182] sd 0:0:0:0: [sda] Write Protect is off [ 51.801184] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 51.801200] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.801261] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 51.801270] sd 0:0:0:0: [sda] Write Protect is off [ 51.801272] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 51.801285] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.801288] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 51.880893] sd 0:0:0:0: [sda] Attached SCSI disk [ 51.881043] sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) [ 51.881053] sd 1:0:0:0: [sdb] Write Protect is off [ 51.881055] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 51.881069] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.881102] sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) [ 51.881111] sd 1:0:0:0: [sdb] Write Protect is off [ 51.881113] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 51.881127] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.881130] sdb: sdb1 < sdb5 sdb6 > [ 51.931618] sd 1:0:0:0: [sdb] Attached SCSI disk [ 51.935877] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 51.935899] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 52.400966] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] [ 52.831007] Attempting manual resume [ 52.831011] swsusp: Resume From Partition 3:5 [ 52.831012] PM: Checking swsusp image. [ 52.858186] PM: Resume from disk failed. [ 52.898422] kjournald starting. Commit interval 5 seconds [ 52.898433] EXT3-fs: mounted filesystem with ordered data mode. [ 60.355778] Linux agpgart interface v0.102 (c) Dave Jones [ 60.436957] agpgart: Detected NVIDIA nForce2 chipset [ 60.455323] agpgart: AGP aperture is 256M @ 0xc0000000 [ 60.533751] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 60.533781] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500 [ 61.233457] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 61.252278] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 61.654366] Bluetooth: Core ver 2.11 [ 61.654420] NET: Registered protocol family 31 [ 61.654422] Bluetooth: HCI device and connection manager initialized [ 61.654426] Bluetooth: HCI socket layer initialized [ 61.667706] Bluetooth: HCI USB driver ver 2.9 [ 61.669461] usbcore: registered new interface driver hci_usb [ 61.834576] parport_pc 00:09: reported by Plug and Play ACPI [ 61.834636] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 61.858253] input: PC Speaker as /class/input/input3 [ 61.930876] nvidia: module license 'NVIDIA' taints kernel. [ 62.428291] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 62.428301] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 21 [ 62.428715] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 [ 62.755364] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 [ 62.755370] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 18 [ 62.755394] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 63.079036] intel8x0_measure_ac97_clock: measured 52838 usecs [ 63.079040] intel8x0: clocking to 47406 [ 64.464836] lp0: using parport0 (interrupt-driven). [ 64.509114] Adding 3943916k swap on /dev/hda5. Priority:-1 extents:1 across:3943916k [ 65.484584] EXT3 FS on hda1, internal journal [ 87.614325] No dock devices found. [ 87.706769] input: Power Button (FF) as /class/input/input4 [ 87.710940] ACPI: Power Button (FF) [PWRF] [ 87.752490] input: Power Button (CM) as /class/input/input5 [ 87.756641] ACPI: Power Button (CM) [PWRB] [ 89.501350] eth0: setting full-duplex. [ 89.991625] ppdev: user-space parallel port driver [ 90.627545] audit(1194781065.047:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5078 profile="/usr/sbin/cupsd" [ 90.694749] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 90.694755] apm: overridden by ACPI. [ 91.998208] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 91.998223] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 91.998293] agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode [ 93.017178] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). [ 93.155772] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 93.171470] NFSD: starting 90-second grace period [ 94.555182] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 94.555188] vboxdrv: Successfully done. [ 95.728717] Failure registering capabilities with primary security module. [ 96.197671] Bluetooth: L2CAP ver 2.8 [ 96.197676] Bluetooth: L2CAP socket layer initialized [ 96.444975] Bluetooth: RFCOMM socket layer initialized [ 96.445069] Bluetooth: RFCOMM TTY layer initialized [ 96.445071] Bluetooth: RFCOMM ver 1.8 [ 100.703487] NET: Registered protocol family 17 [ 102.610375] NET: Registered protocol family 10 [ 102.610527] lo: Disabled Privacy Extensions [ 113.176999] eth0: no IPv6 routers present [ 432.613848] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 432.613863] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 432.613929] agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode [14497.139024] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [14497.139040] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [14497.139105] agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode ** Affects: ubuntu Importance: Undecided Status: New -- Sata hdd works on feisty live dvd but not if installed to hard drive https://bugs.launchpad.net/bugs/162104 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
