a log from k3b "showing" the error:

.........................................................................................
 ... ...
Track 01:  214 of  695 MB written (fifo 100%) [buf  87%]   8.0x.
Track 01:  215 of  695 MB written (fifo 100%) [buf  90%]   8.6x.
Track 01:  216 of  695 MB written (fifo  97%) [buf  90%]   8.0x.
Track 01:  217 of  695 MB written (fifo 100%) [buf  93%]   8.5x.
Track 01:  218 of  695 MB written (fifo 100%) [buf  93%]   8.1x.
Track 01:  219 of  695 MB written (fifo  99%) [buf  93%]   8.3x.
Track 01:  220 of  695 MB written (fifo 100%) [buf  87%]   8.0x.
Track 01:  221 of  695 MB written (fifo 100%) [buf  96%]   8.6x.
Track 01:  222 of  695 MB written (fifo 100%) [buf  90%]   8.7x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 01 BC C7 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0B 00 00 00 00 57 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x57 Qual 0x00 (unable to recover table-of-contents) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.015s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 233191424 bytes
Writing  time:  201.495s
Average write speed  24.2x.
Min drive buffer fill was 78%
Fixating...
Fixating time:    0.005s
Errno: 5 (Input/output error), start/stop unit scsi sendcmd: no error
CDB:  1B 00 00 00 02 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0B 00 00 00 00 09 01 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.003s timeout 200s
/usr/bin/wodim: Cannot eject media.
/usr/bin/wodim: fifo had 3865 puts and 3674 gets.
/usr/bin/wodim: fifo was 0 times empty and 2602 times full, min fill was 96%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed=8 -dao driveropts=burnfree 
-eject -data -tsize=356254s - 


Thanks

-- 
Error while burning DVD-RWs: Input/output error
https://bugs.launchpad.net/bugs/15424
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to