** Description changed: - [IMPACT] The latest Intel based LOMs do not work fully on Focal. These devices have up to 4 ports, but only two seem to work and this has been seen on at least two different systems using LOMs based on this. We've discovered via testing that while the i40e driver in 5.4 fails, the version in 5.8 works, so that's the point to start patching. [FIX] This list of Patches enables the latest X710 controller fully: * 3df5b9a6a9ec i40e: enable X710 support * 3fd8ed563958 i40e: Add UDP segmentation offload support * 621650cabee5 i40e: Refactoring VF MAC filters counting to make more reliable * d80a476f4a12 i40e: Fix LED blinking flow for X710T*L devices * cdb89f15bd46 i40e: allow ethtool to report SW and FW versions in recovery mode * ff9246571a2e i40e: Fix for persistent lldp support * a3e09ded6a6d i40e: Extract detection of HW flags into a function * 0514db37dd78 i40e: Extend PHY access with page change flag These are all clean cherry picks from 5.5. My tree with these can be found here: https://code.launchpad.net/~bladernr/ubuntu/+source/linux/+git/focal/+ref/1893956-update-i40e-intel-lom [TESTCASE] + + i40e should load successfully, all ports on Carlsville x710 LOM should + be visible and configurable.
** Description changed: [IMPACT] The latest Intel based LOMs do not work fully on Focal. These devices have up to 4 ports, but only two seem to work and this has been seen on at least two different systems using LOMs based on this. We've discovered via testing that while the i40e driver in 5.4 fails, the version in 5.8 works, so that's the point to start patching. [FIX] This list of Patches enables the latest X710 controller fully: * 3df5b9a6a9ec i40e: enable X710 support - * 3fd8ed563958 i40e: Add UDP segmentation offload support - * 621650cabee5 i40e: Refactoring VF MAC filters counting to make more reliable * d80a476f4a12 i40e: Fix LED blinking flow for X710T*L devices - * cdb89f15bd46 i40e: allow ethtool to report SW and FW versions in recovery mode - * ff9246571a2e i40e: Fix for persistent lldp support - * a3e09ded6a6d i40e: Extract detection of HW flags into a function - * 0514db37dd78 i40e: Extend PHY access with page change flag - These are all clean cherry picks from 5.5. + These are all clean cherry picks from 5.5 into 5.4 My tree with these can be found here: https://code.launchpad.net/~bladernr/ubuntu/+source/linux/+git/focal/+ref/1893956-update-i40e-intel-lom [TESTCASE] i40e should load successfully, all ports on Carlsville x710 LOM should be visible and configurable. + + Test kernels have been verified by the vendor reporting the issue that + all network ports on the LOM are accessible and pass traffic at expected + speeds. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893956 Title: Intel NIC LOMs do not work on Focal To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1893956/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
