as a short feedback i have solved the problem for me as follows i have patched the ath driver and set the eeprom to germany and additionally i have applied an openwrt patch
then I have rebuild the module with the option "Do not enforce EEPROM regulatory restrictions" link to the patch (must be adjusted depending on kernel version) https://github.com/openwrt/openwrt/blob/master/package/kernel/mac80211/patches/ath/402-ath_regd_optional.patch Result [ 2.717027] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 2.775040] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 2.831174] ath10k_pci 0000:03:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe [ 2.831175] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [ 2.831504] ath10k_pci 0000:03:00.0: firmware ver 10.4-3.9.0.2-00130 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate crc32 123ff35a [ 2.889062] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe [ 2.889063] ath10k_pci 0000:04:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [ 2.889410] ath10k_pci 0000:04:00.0: firmware ver 10.4-3.9.0.2-00130 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate crc32 123ff35a [ 4.064069] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id 0:1 crc32 85498734 [ 4.120218] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:2 crc32 85498734 [ 6.732655] ath10k_pci 0000:03:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 [ 6.796992] ath10k_pci 0000:04:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 [ 6.805002] ath: EEPROM regdomain sanitized [ 6.805004] ath: EEPROM regdomain: 0x8114 [ 6.805004] ath: EEPROM indicates we should expect a country code [ 6.805004] ath: doing EEPROM country->regdmn map search [ 6.805005] ath: country maps to regdmn code: 0x37 [ 6.805005] ath: Country alpha2 being used: DE [ 6.805005] ath: Regpair used: 0x37 [ 6.805096] ath: EEPROM regdomain: 0x8114 [ 6.805096] ath: EEPROM indicates we should expect a country code [ 6.805096] ath: doing EEPROM country->regdmn map search [ 6.805097] ath: country maps to regdmn code: 0x37 [ 6.805097] ath: Country alpha2 being used: DE [ 6.805097] ath: Regpair used: 0x37 [ 6.805098] ath: regdomain 0x8114 dynamically updated by user [ 6.807137] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0 [ 6.869077] ath: EEPROM regdomain sanitized [ 6.869079] ath: EEPROM regdomain: 0x8114 [ 6.869079] ath: EEPROM indicates we should expect a country code [ 6.869080] ath: doing EEPROM country->regdmn map search [ 6.869080] ath: country maps to regdmn code: 0x37 [ 6.869080] ath: Country alpha2 being used: DE [ 6.869081] ath: Regpair used: 0x37 [ 9.640029] ath10k_pci 0000:03:00.0: Unknown eventid: 36933 [ 9.644566] ath10k_pci 0000:04:00.0 wlp4s0: renamed from wlan0 phy#1 country DE: DFS-ETSI (2400 - 2483 @ 40), (N/A, 20), (N/A) (5150 - 5250 @ 80), (N/A, 20), (N/A), NO-OUTDOOR, AUTO-BW (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW (5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS (5725 - 5875 @ 80), (N/A, 13), (N/A) (57000 - 66000 @ 2160), (N/A, 40), (N/A) phy#0 country DE: DFS-ETSI (2400 - 2483 @ 40), (N/A, 20), (N/A) (5150 - 5250 @ 80), (N/A, 20), (N/A), NO-OUTDOOR, AUTO-BW (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW (5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS (5725 - 5875 @ 80), (N/A, 13), (N/A) (57000 - 66000 @ 2160), (N/A, 40), (N/A) Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) * 2472 MHz [13] (20.0 dBm) * 2484 MHz [14] (disabled) Frequencies: * 5180 MHz [36] (20.0 dBm) * 5200 MHz [40] (20.0 dBm) * 5220 MHz [44] (20.0 dBm) * 5240 MHz [48] (20.0 dBm) * 5260 MHz [52] (20.0 dBm) (radar detection) * 5280 MHz [56] (20.0 dBm) (radar detection) * 5300 MHz [60] (20.0 dBm) (radar detection) * 5320 MHz [64] (20.0 dBm) (radar detection) * 5500 MHz [100] (26.0 dBm) (radar detection) * 5520 MHz [104] (26.0 dBm) (radar detection) * 5540 MHz [108] (26.0 dBm) (radar detection) * 5560 MHz [112] (26.0 dBm) (radar detection) * 5580 MHz [116] (26.0 dBm) (radar detection) * 5600 MHz [120] (26.0 dBm) (radar detection) * 5620 MHz [124] (26.0 dBm) (radar detection) * 5640 MHz [128] (26.0 dBm) (radar detection) * 5660 MHz [132] (26.0 dBm) (radar detection) * 5680 MHz [136] (26.0 dBm) (radar detection) * 5700 MHz [140] (26.0 dBm) (radar detection) * 5720 MHz [144] (disabled) * 5745 MHz [149] (13.0 dBm) * 5765 MHz [153] (13.0 dBm) * 5785 MHz [157] (13.0 dBm) * 5805 MHz [161] (13.0 dBm) * 5825 MHz [165] (13.0 dBm) * 5845 MHz [169] (13.0 dBm) * 5865 MHz [173] (13.0 dBm) now all channels are there with the right transmitting power and as a small bonus the card is now region free -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1895333 Title: cannot change the regulatory domain ath10k, QCA9984 (QNAP QWA-AC2600) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1895333/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs