vc-log output for working boot: [ 5.506129] vcos: brfs: File read: /mfs/sd/config.txt [ 5.506979] vcos: brfs: File read: 1663 bytes [ 5.560501] vcos: brfs: File read: /mfs/sd/edid.dat [ 5.578718] vcos: brfs: File read: 256 bytes [ 5.586393] vcos: brfs: File read: /mfs/sd/config.txt [ 5.602761] vcos: brfs: File read: 1663 bytes [ 6.049331] vcos: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined [ 6.051831] vcos: *** Restart logging [ 6.071420] vcos: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead [ 6.071433] unknown: HDMI0: hdmi_pixel_encoding: 300000000 [ 6.071447] unknown: HDMI1: hdmi_pixel_encoding: 300000000 [ 8.241326] vcos: brfs: File read: /mfs/sd/initrd.img [ 8.241342] vcos: Loading 'initrd.img' to 0x0 size 0x25e9454 [ 8.298198] vcos: initramfs loaded to 0x2ca16000 (size 0x25e9454) [ 8.302695] vcos: dtb_file 'bcm2711-rpi-4-b.dtb' [ 8.302731] vcos: brfs: File read: 39752788 bytes [ 8.308755] vcos: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb [ 8.308787] vcos: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xc35d [ 8.340789] vcos: brfs: File read: 50013 bytes [ 8.366470] vcos: brfs: File read: /mfs/sd/overlays/overlay_map.dtb [ 8.526095] vcos: brfs: File read: 1667 bytes [ 8.529227] vcos: brfs: File read: /mfs/sd/config.txt [ 8.529322] vcos: dtparam: pwr_led_trigger=none [ 8.556943] vcos: dtparam: pwr_led_activelow=off [ 8.583619] vcos: dtparam: act_led_trigger=none [ 8.611069] vcos: dtparam: act_led_activelow=off [ 8.638069] vcos: dtparam: eth_led0=4 [ 8.664149] vcos: dtparam: eth_led1=4 [ 8.690571] vcos: dtparam: audio=on [ 8.716068] vcos: brfs: File read: 1663 bytes [ 8.725249] vcos: brfs: File read: /mfs/sd/overlays/vc4-kms-v3d-pi4.dtbo [ 8.884909] vcos: Loaded overlay 'vc4-kms-v3d-pi4' [ 9.288921] vcos: brfs: File read: 3831 bytes [ 9.297646] vcos: brfs: File read: /mfs/sd/cmdline.txt [ 9.297750] vcos: Read command line from file 'cmdline.txt': [ 9.297786] vcos: 'console=tty1 root=LABEL=writable rootfstype=ext4 rootwait quiet splash video=HDMI-A-1:1080x1920M@60,rotate=90,panel_orientation=right_side_up drm.edid_firmware=edid/Waveshare5.5Amoled4.bin fbcon=rotate:1 fsck.mode=force fsck.repair=yes' [ 10.254631] vcos: brfs: File read: 236 bytes [ 10.837803] vcos: brfs: File read: /mfs/sd/vmlinuz [ 10.837838] vcos: Loading 'vmlinuz' to 0x80000 size 0x90b122 [ 13.997830] vcos: Kernel relocated to 0x200000 [ 13.997857] vcos: Device tree loaded to 0x2ca09600 (size 0xc9ef) [ 14.006215] vcos: bfs_xhci_stop [ 14.006228] vcos: XHCI-STOP [ 14.006397] vcos: xHC ver: 256 HCS: 05000420 fc000031 00e70004 HCC: 002841eb [ 14.008496] vcos: PCI reset [ 18.085403] vcos: vchiq_core: vchiq_init_state: slot_zero = 0xd9000000, is_master = 1 [ 18.088679] vcos: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000004
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1944397 Title: hdmi broken on 5.13.0-1007-raspi To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1944397/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs