I suffer the same problems of other pavilion Turion64 X2 users: system can be started only with noapic option (sometimes it can boot without it, but only if I use the NVIDIA proprietary drivers: in that case is very unstable, expecially during the boot and the shutdown). Using the noapic boot option USB does not work well: only peripherals already connected before Ubuntu is booted do their works, all the others, if plugged when Ubuntu is running, are simply and completely ignored. For example: if i plug an USB memory key when the computer is running, that is completely ignored and is impossible to mount it. If i plug it when the computer is switched off, and then I boot, Ubuntu is able to mount it. But even in that case, if i umount the key and unplug it, then there will be no way to remount it when re-plugged. The same occurs with USB mouses: if i plug it when Ubuntu is already booted, the mouse is ignored. Only a peripheral already connected before the boot is recognized and configurated. here is my "cat /proc/interrupts" : CPU0 CPU1 0: 380780 12695 XT-PIC-XT timer 1: 5418 186 XT-PIC-XT i8042 2: 0 0 XT-PIC-XT cascade 5: 75173 3535 XT-PIC-XT sata_nv 7: 34838 955961 XT-PIC-XT ehci_hcd:usb1 8: 4 3 XT-PIC-XT rtc 9: 1888 238 XT-PIC-XT acpi, HDA Intel 10: 180282 7640 XT-PIC-XT bcm43xx, eth2 11: 299800 10441 XT-PIC-XT ohci_hcd:usb2, ohci1394, sdhci:slot0 12: 70 53 XT-PIC-XT i8042 14: 13316 585 XT-PIC-XT ide0 NMI: 0 0 LOC: 12678 380637 ERR: 891921 <---------------------STRANGE.... MIS: 0
>From my dmesg: .... [ 0.632000] PCI: BIOS BUG #81[49435000] found ..... [ 129.776000] irq 7: nobody cared (try booting with the "irqpoll" option) [ 129.776000] [<c015b594>] __report_bad_irq+0x24/0x80 [ 129.776000] [<c013972e>] __rcu_process_callbacks+0x11e/0x1d0 [ 129.776000] [<c015b852>] note_interrupt+0x262/0x2a0 [ 129.776000] [<f88f96c2>] usb_hcd_irq+0x22/0x60 [usbcore] [ 129.776000] [<c015aab0>] handle_IRQ_event+0x30/0x60 [ 129.776000] [<c015c46b>] handle_level_irq+0xdb/0x110 [ 129.776000] [<c0106b1b>] do_IRQ+0x3b/0x70 [ 129.776000] [<c0118735>] smp_apic_timer_interrupt+0x55/0x80 [ 129.776000] [<f884f74b>] acpi_processor_idle+0x0/0x425 [processor] [ 129.776000] [<c0105223>] common_interrupt+0x23/0x30 [ 129.776000] [<f884f74b>] acpi_processor_idle+0x0/0x425 [processor] [ 129.776000] [<c011dba2>] native_safe_halt+0x2/0x10 [ 129.776000] [<f884f6d1>] acpi_safe_halt+0x1c/0x29 [processor] [ 129.776000] [<f884f8dd>] acpi_processor_idle+0x192/0x425 [processor] [ 129.776000] [<f884f74b>] acpi_processor_idle+0x0/0x425 [processor] [ 129.776000] [<c0102413>] cpu_idle+0x53/0xe0 [ 129.776000] ======================= [ 129.776000] handlers: [ 129.776000] [<f88f96a0>] (usb_hcd_irq+0x0/0x60 [usbcore]) [ 129.776000] Disabling IRQ #7 [ 131.000000] Clocksource tsc unstable (delta = -172025479 ns) .... -- HP Pavilion dv6103eu laptop - all Ubuntu versions gets frozen during X startup until I specify "noapic" boot option https://bugs.launchpad.net/bugs/89746 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs