Verified on a Pi Zero 2W and 400 running the jammy arm64 server for Pi image. Additional verification on the Zero 2W performed for LP: #2078525 (also fixed in this upload).
** Description changed: [ Impact ] flash-kernel displays a "selected" DTB at the top of its output. On a Pi this isn't actually that relevant as it goes on to copy every DTB associated with the kernel anyway, but this is still confusing for users, especially when they see a completely different board model than the one they expected (e.g. at present on the Pi 400 or Pi 5, the output will indicate that the rpi-4-b dtb is being used). [ Test Plan ] - * Boot a mantic daily image on an affected model of Pi (400, 5, CM3, CM3+, Zero 2W) + * Boot a jammy image on an affected model of Pi (400, 5, CM3, CM3+, Zero 2W) * Run "sudo flash-kernel" and confirm it outputs "Using DTB: bcm2711-rpi-4-b.dtb" at the top of its messages * Enable the -proposed pocket and "sudo apt update" * "sudo apt install flash-kernel" to update flash-kernel to the proposed version * Run "sudo flash-kernel" and confirm it outputs the correct DTB for the selected model of Pi. [ Regression Potential ] Low; the existing flash-kernel already copies all DTBs found and the proposed one will too (all Pi related entries use "Method: pi", the method isn't changing in its behaviour, the only db entries that are changing are Pi related). Thus the worst-case scenario is that flash- kernel continues to output the "wrong" DTB at the top of its output, which is no worse than the present situation. [ Original Description ] flash-kernel probably shouldn't even be dealing with the DTBs on Pi but it's picking the wrong one for some machine models. For example on a Raspberry Pi 400 Rev 1.0 it uses bcm2711-rpi-4-b.dtb. Same one Compute Module 3 and 3+. It's probably because in /usr/share/flash-kernel/db/all.db the catch-all Machine: Raspberry Pi * is listed before these above mentioned models (and others as well). ** Tags removed: verification-needed-jammy ** Tags added: verification-done-jammy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2038087 Title: [FFe] flash-kernel displays wrong "selected" DTB on various Pi models To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/flash-kernel/+bug/2038087/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
