Public bug reported:
Kernel 7.0 doesn't boot on Pi 3B+. It hangs and then reboots:
Raspberry Pi Bootcode
Read File: tryboot.txt, 322
Read File: start.elf, 2990176 (bytes)
Read File: fixup.dat, 7324 (bytes)
MESS:00:00:01.126836:0: boot-part: 0 fs-type: 0
MESS:00:00:01.129672:0: boot-part: 0 fs-type: 3
MESS:00:00:01.633415:0: brfs: File read: /mfs/sd/tryboot.txt
MESS:00:00:01.637493:0: brfs: File read: 322 bytes
MESS:00:00:01.644938:0: brfs: File read: /mfs/sd/tryboot/config.txt
MESS:00:00:01.650593:0: brfs: File read: 1925 bytes
MESS:00:00:01.657706:0: brfs: File read: /mfs/sd/install/config.txt
MESS:00:00:01.663091:0: brfs: File read: 248 bytes
MESS:00:00:01.701210:0: HDMI0:EDID error reading EDID block 0 attempt 0
MESS:00:00:01.707377:0: HDMI0:EDID error reading EDID block 0 attempt 1
MESS:00:00:01.713713:0: HDMI0:EDID error reading EDID block 0 attempt 2
MESS:00:00:01.720050:0: HDMI0:EDID error reading EDID block 0 attempt 3
MESS:00:00:01.726387:0: HDMI0:EDID error reading EDID block 0 attempt 4
MESS:00:00:01.732723:0: HDMI0:EDID error reading EDID block 0 attempt 5
MESS:00:00:01.739060:0: HDMI0:EDID error reading EDID block 0 attempt 6
MESS:00:00:01.745397:0: HDMI0:EDID error reading EDID block 0 attempt 7
MESS:00:00:01.751734:0: HDMI0:EDID error reading EDID block 0 attempt 8
MESS:00:00:01.758071:0: HDMI0:EDID error reading EDID block 0 attempt 9
MESS:00:00:01.764166:0: HDMI0:EDID giving up on reading EDID block 0
MESS:00:00:01.770445:0: brfs: File read: /mfs/sd/tryboot.txt
MESS:00:00:01.774740:0: brfs: File read: 322 bytes
MESS:00:00:01.781296:0: brfs: File read: /mfs/sd/tryboot/config.txt
MESS:00:00:02.323470:0: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not
defined
MESS:00:00:02.330492:0: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not
defined
MESS:00:00:02.339116:0: *** Restart logging
MESS:00:00:02.341603:0: brfs: File read: 1925 bytes
MESS:00:00:02.346796:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
MESS:00:00:02.354306:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1
MESS:00:00:02.361165:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2
MESS:00:00:02.368021:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3
MESS:00:00:02.374880:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4
MESS:00:00:02.381736:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5
MESS:00:00:02.388595:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6
MESS:00:00:02.395453:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7
MESS:00:00:02.402310:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8
MESS:00:00:02.409168:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9
MESS:00:00:02.415784:0: hdmi: HDMI0:EDID giving up on reading EDID block 0
MESS:00:00:02.421688:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
MESS:00:00:02.429480:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1
MESS:00:00:02.436338:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2
MESS:00:00:02.443196:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3
MESS:00:00:02.450053:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4
MESS:00:00:02.456910:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5
MESS:00:00:02.463769:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6
MESS:00:00:02.470627:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7
MESS:00:00:02.477483:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8
MESS:00:00:02.484342:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9
MESS:00:00:02.490957:0: hdmi: HDMI0:EDID giving up on reading EDID block 0
MESS:00:00:02.496572:0: hdmi: HDMI:hdmi_get_state is deprecated, use
hdmi_get_display_state instead
MESS:00:00:02.505317:0: HDMI0: hdmi_pixel_encoding: 162000000
MESS:00:00:02.511041:0: vec: vec_middleware_power_on: vec_base: 0x7e806000
rev-id 0x00002708 @ vec: 0x7e806100 @ 0x00000420 enc: 0x7e806060 @ 0x00000220
cgmsae: 0x7e80605c @ 0x00000000
MESS:00:00:08.506800:0: brfs: File read:
/mfs/sd/tryboot/7.0.0-1005-raspi/initrd.img
MESS:00:00:08.512850:0: Loaded 'tryboot/7.0.0-1005-raspi/initrd.img' to 0x0
size 0x53b4007
MESS:00:00:08.619233:0: initramfs (initrd.img) loaded to 0x29c4b000 (size
0x53b4007)
MESS:00:00:08.634972:0: dtb_file 'bcm2710-rpi-3-b-plus.dtb'
MESS:00:00:08.638856:0: brfs: File read: 87769095 bytes
MESS:00:00:08.650606:0: brfs: File read:
/mfs/sd/tryboot/7.0.0-1005-raspi/bcm2710-rpi-3-b-plus.dtb
MESS:00:00:08.657870:0: Loaded
'tryboot/7.0.0-1005-raspi/bcm2710-rpi-3-b-plus.dtb' to 0x100 size 0x89fa
MESS:00:00:08.682689:0: brfs: File read: 35322 bytes
MESS:00:00:08.704077:0: brfs: File read:
/mfs/sd/tryboot/7.0.0-1005-raspi/overlays/overlay_map.dtb
MESS:00:00:08.743720:0: brfs: File read: 5971 bytes
MESS:00:00:08.748747:0: brfs: File read: /mfs/sd/tryboot.txt
MESS:00:00:08.752816:0: brfs: File read: 322 bytes
MESS:00:00:08.759930:0: brfs: File read: /mfs/sd/tryboot/config.txt
MESS:00:00:08.764694:0: dtparam: audio=on
MESS:00:00:08.773301:0: dtparam: i2c_arm=on
MESS:00:00:08.785341:0: dtparam: spi=on
MESS:00:00:08.795667:0: dtparam: watchdog=on
MESS:00:00:08.811220:0: brfs: File read: 1925 bytes
MESS:00:00:08.837271:0: brfs: File read:
/mfs/sd/tryboot/7.0.0-1005-raspi/overlays/vc4-kms-v3d.dtbo
MESS:00:00:08.892695:0: Loaded overlay 'vc4-kms-v3d'
MESS:00:00:08.895954:0: dtparam: cma-128=true
MESS:00:00:09.003335:0: brfs: File read: 2760 bytes
MESS:00:00:09.014330:0: brfs: File read:
/mfs/sd/tryboot/7.0.0-1005-raspi/overlays/dwc2.dtbo
MESS:00:00:09.028931:0: Loaded overlay 'dwc2'
MESS:00:00:09.052480:0: brfs: File read: 801 bytes
MESS:00:00:09.059594:0: brfs: File read:
/mfs/sd/tryboot/7.0.0-1005-raspi/cmdline.txt
MESS:00:00:09.065770:0: Read command line from file
'tryboot/7.0.0-1005-raspi/cmdline.txt':
MESS:00:00:09.073805:0: 'console=serial0,115200 multipath=off
dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 panic=10
rootwait fixrtc'
MESS:00:00:09.106779:0: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not
defined
MESS:00:00:09.208958:0: Enabling early watchdog
MESS:00:00:09.212502:0: brfs: File read: 132 bytes
MESS:00:00:10.192651:0: brfs: File read:
/mfs/sd/tryboot/7.0.0-1005-raspi/vmlinuz
MESS:00:00:10.198417:0: Loaded 'tryboot/7.0.0-1005-raspi/vmlinuz' to 0x200000
size 0xe053f2
MESS:00:00:12.734689:0: Device tree loaded to 0x29c41f00 (size 0x901b)
MESS:00:00:12.741721:0: uart: Set PL011 baud rate to 103448.300000 Hz
MESS:00:00:12.747969:0: uart: Baud rate change done...
MESS:00:00:12.751381:0: uart: Baud rate
REBOOT
** Affects: linux-raspi (Ubuntu)
Importance: Undecided
Assignee: Juerg Haefliger (juergh)
Status: New
** Affects: linux-raspi (Ubuntu Resolute)
Importance: Undecided
Assignee: Juerg Haefliger (juergh)
Status: New
** Also affects: linux-raspi (Ubuntu Resolute)
Importance: Undecided
Status: New
** Changed in: linux-raspi (Ubuntu Resolute)
Assignee: (unassigned) => Juerg Haefliger (juergh)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2146871
Title:
Boot failure on Pi 3B+
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/2146871/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
