Additional data point, plus a workaround that needs no downgrade. Hardware: Sapphire Radeon AI PRO R9700 (1002:7551, subsystem 1da2:e499, VBIOS 113-1E4990U-S83), used headless for compute. The monitor is on the Raphael iGPU (DCN 3.1.5) of a Ryzen 9 7950X3D. KDE neon (noble), kernel 7.0.0-42-generic.
Symptom variant: no display is attached to the R9700, so there was no black screen. Instead the log filled with "failed to load ucode DMCUB(0x3F)" and DMCUB errors, followed by "SMU: No response" and "late_init of IP block <smu> failed -62". A few minutes after boot the GPU fan went to full speed and the whole system froze. Scope: between 0ubuntu3.3 and 0ubuntu3.4 exactly four firmware files changed, and only one of them is broken (header ip / ucode_version): file 3.3 3.4 dcn_3_1_4_dmcub 3.1 0x08004800 3.1 0x08005700 dcn_3_1_5_dmcub 3.1 0x05001C00 3.1 0x05002E00 dcn_3_2_0_dmcub 3.2 0x07002A00 3.2 0x07002F00 dcn_4_0_1_dmcub 4.0 0x0A000800 symlink -> dcn_3_2_0 (3.2 0x07002F00) The other three updates look correct. The new dcn_3_1_5 firmware (0x05002E00) runs on the iGPU here without errors. Downgrading the whole package to 3.3 therefore also reverts the DCN 3.1.4 fix from LP: #2168847. Restoring this one file is enough. Workaround without downgrade or hold, and without writing into package-owned files: the kernel firmware loader looks in /lib/firmware/updates before /lib/firmware. initramfs-tools does the same (add_firmware in /usr/share/initramfs-tools/hook-functions) on systems where amdgpu is in the initramfs. The 3.3 .deb is still downloadable from Launchpad: wget https://launchpad.net/ubuntu/+archive/primary/+files/linux-firmware-amd-graphics_20240318.git3b128b60-0ubuntu3.3_all.deb dpkg-deb --fsys-tarfile linux-firmware-amd-graphics_20240318.git3b128b60-0ubuntu3.3_all.deb \ | tar -x ./lib/firmware/amdgpu/dcn_4_0_1_dmcub.bin.zst md5sum lib/firmware/amdgpu/dcn_4_0_1_dmcub.bin.zst # expect 4ba7d5ddafac5fe090fdf886a6c0e916, 225553 bytes sudo install -D -m644 lib/firmware/amdgpu/dcn_4_0_1_dmcub.bin.zst \ /lib/firmware/updates/amdgpu/dcn_4_0_1_dmcub.bin.zst sudo update-initramfs -u -k all Result here on 7.0.0-42: "DMUB hardware initialized: version=0x0A000800", no ucode, DMCUB or SMU errors, runtime suspend/resume of the card is clean, and a 90 s fp16 matmul load runs at the 300 W limit with normal fan control (0 -> 2800 rpm) and correct results. Once a fixed package is released, delete /lib/firmware/updates/amdgpu/dcn_4_0_1_dmcub.bin.zst and run update-initramfs again, otherwise it keeps shadowing the packaged file. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2173041 Title: black screen after upgrading linux-firmware-amd-graphics to 0ubuntu3.4 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware-amd-graphics/+bug/2173041/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
