** Description changed:

  [SRU Justification]
  
  [Impact]
  Bluetooth is unavailable on systems with the Intel Bluetooth device at USB
  ID 8087:0043 because btusb does not recognize the ID and does not bind to
  the device.
  
  [Fix]
  Cherry-pick upstream commit:
  - 69bf0c2b348f ("Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)")
  
  The commit adds USB ID 8087:0043 to the btusb quirks table with the
  BTUSB_INTEL_COMBINED driver_info, matching other Intel combined-mode
  Bluetooth devices.
  
  [Test Plan]
  1. On a system with the Intel Bluetooth device 8087:0043, confirm the ID
-    with "lsusb -d 8087:0043".
+    with "lsusb -d 8087:0043".
  2. Verify btusb binds to the device: "lsusb -t" shows the btusb driver, or
-    check /sys/bus/usb/drivers/btusb/.
+    check /sys/bus/usb/drivers/btusb/.
  3. Verify the controller is usable: "bluetoothctl list" or "hciconfig -a".
  4. Check dmesg for btusb probe errors.
  
  [Where problems could occur]
  The change only adds one USB ID to the quirks table, so existing devices are
  unaffected. The only risk is limited to 8087:0043 devices if the
  BTUSB_INTEL_COMBINED driver_info does not match the hardware's requirements.
  
  [Other Info]
- Backported to:
- - linux (Ubuntu Resolute)
- - linux (Ubuntu Stonking)
- - linux-oem-7.0 (Ubuntu Resolute)
- - linux-oem-7.3 (Ubuntu Resolute)
- 
- The upstream commit is in Linus's mainline, so no SAUCE prefix is
- needed.
+ Upstream follow-up 5ba2dc0439c6 ("Bluetooth: btusb: annotate Intel Otter
+ Peak 2 USB ID") is not backported. It carries a Fixes: tag but makes no
+ functional change: it only moves the 8087:0043 entry next to the 8087:0040
+ entry to keep the Intel IDs in numerical order and annotates it as
+ "Otter Peak 2 (AX231), Wildcat Lake". The ID and its BTUSB_INTEL_COMBINED
+ quirk are already provided by 69bf0c2b348f, so the follow-up adds no
+ behavioral fix. It also edits drivers/bluetooth/btusb_main.c, which only
+ exists after the later upstream btusb multi-file split; these branches still
+ use the single btusb.c, so reproducing it would be a cosmetic reorder with
+ no benefit.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2173714

Title:
  [SRU] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2173714/+subscriptions


-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to