** Description changed: + [ Impact ] + ubuntu-raspi-settings ships a dracut config that includes the brcmfmac driver but specifies all the needed firmware files. These should be included automatically. The brcmfmac kernel module should list those modules. Tested on a Pi 5 stonking docker image with linux-image-7.3.0-5-generic 7.3.0-5.5: apt install dracut linux-firmware-raspi ubuntu-raspi-settings dracut -f before.img 3cpio -t before.img > before.txt sed -i '/firmware/d' /etc/dracut.conf.d/12-raspi-brcmfmac.conf dracut -f after.img - 3cpio -t after.img > after.txt + 3cpio -t after.img > after.txt diff -u before.txt after.txt | grep '^-' These module will be missing then: -usr/lib/firmware/brcm/brcmfmac43436-sdio.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43456-sdio.clm_blob.zst -usr/lib/firmware/cypress/cyfmac43455-sdio-minimal.bin.zst -usr/lib/firmware/brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43430b0-sdio.raspberrypi,model-zero-2-w.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43436-sdio.raspberrypi,model-zero-2-w.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,3-model-a-plus.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,5-compute-module.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,500.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43456-sdio.raspberrypi,4-compute-module.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43456-sdio.raspberrypi,400.clm_blob.zst modinfo /lib/modules/7.3.0-5-generic/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko.zst shows already some globbing: firmware: brcm/brcmfmac*-sdio.*.bin firmware: brcm/brcmfmac*-sdio.*.txt firmware: brcm/brcmfmac*-pcie.*.txcap_blob firmware: brcm/brcmfmac*-pcie.*.clm_blob firmware: brcm/brcmfmac*-pcie.*.bin firmware: brcm/brcmfmac*-pcie.*.txt firmware: brcm/brcmfmac*-pcie.txt They probably have to add brcm/brcmfmac*-sdio.*.clm_blob and cypress/cyfmac43455-sdio-minimal.bin + + [ Fix ] + + For the kernel, cherry-pick: + 8a0f175488bd wifi: brcmfmac: Add per-board clm_blob firmware binaries + 37f9b5f2465d wifi: brcmfmac: Add clm_blob firmware for brcmfmac43456-sdio + + [ Test Plan ] + + [ Where Problems Could Occur ] + + For the kernel this just adds additional firmware entries to the + .modinfo section of the module. Anything that consumes this data might + trip over that new data. initrd size goes up which could cause kernel + install failures (out of disk space). Blobs get loaded early which could + result in boot hangs, stalls, failures.
** Description changed: [ Impact ] ubuntu-raspi-settings ships a dracut config that includes the brcmfmac driver but specifies all the needed firmware files. These should be included automatically. The brcmfmac kernel module should list those modules. Tested on a Pi 5 stonking docker image with linux-image-7.3.0-5-generic 7.3.0-5.5: apt install dracut linux-firmware-raspi ubuntu-raspi-settings dracut -f before.img 3cpio -t before.img > before.txt sed -i '/firmware/d' /etc/dracut.conf.d/12-raspi-brcmfmac.conf dracut -f after.img 3cpio -t after.img > after.txt diff -u before.txt after.txt | grep '^-' These module will be missing then: -usr/lib/firmware/brcm/brcmfmac43436-sdio.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43456-sdio.clm_blob.zst -usr/lib/firmware/cypress/cyfmac43455-sdio-minimal.bin.zst -usr/lib/firmware/brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43430b0-sdio.raspberrypi,model-zero-2-w.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43436-sdio.raspberrypi,model-zero-2-w.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,3-model-a-plus.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,5-compute-module.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,500.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43456-sdio.raspberrypi,4-compute-module.clm_blob.zst -usr/lib/firmware/brcm/brcmfmac43456-sdio.raspberrypi,400.clm_blob.zst modinfo /lib/modules/7.3.0-5-generic/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko.zst shows already some globbing: firmware: brcm/brcmfmac*-sdio.*.bin firmware: brcm/brcmfmac*-sdio.*.txt firmware: brcm/brcmfmac*-pcie.*.txcap_blob firmware: brcm/brcmfmac*-pcie.*.clm_blob firmware: brcm/brcmfmac*-pcie.*.bin firmware: brcm/brcmfmac*-pcie.*.txt firmware: brcm/brcmfmac*-pcie.txt They probably have to add brcm/brcmfmac*-sdio.*.clm_blob and cypress/cyfmac43455-sdio-minimal.bin [ Fix ] For the kernel, cherry-pick: 8a0f175488bd wifi: brcmfmac: Add per-board clm_blob firmware binaries 37f9b5f2465d wifi: brcmfmac: Add clm_blob firmware for brcmfmac43456-sdio [ Test Plan ] + Install kernel and: + $ Inspect the output of modinfo brcmfmac for the new firmware entries + $ Inspect the content of the initrd for the new firmware blobs + [ Where Problems Could Occur ] For the kernel this just adds additional firmware entries to the .modinfo section of the module. Anything that consumes this data might trip over that new data. initrd size goes up which could cause kernel install failures (out of disk space). Blobs get loaded early which could result in boot hangs, stalls, failures. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2168109 Title: brcmfmac firmware files should be included automatically To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/2168109/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
