Public bug reported:

# Bug Report: Touchpad cursor jumping regression in kernel 7.0.0-43

## Summary

Touchpad exhibits severe coordinate jumping (~50 Hz oscillation on the Y
axis, delta 250–286 units) when the laptop charger is connected. The
issue is **not present** on kernel `7.0.0-42-generic` and **appears** on
kernel `7.0.0-43-generic`. The touchpad works flawlessly on battery
power on both kernels.

---

## System Information

| Component | Value |
|---|---|
| **Distribution** | Ubuntu 24.04.5 LTS (Noble Numbat) |
| **Session** | Wayland (GNOME Shell) |
| **Working kernel** | `7.0.0-42-generic` (7.0.0-42.42~24.04.1) |
| **Broken kernel** | `7.0.0-43-generic` (7.0.0-43.43~24.04.1) |
| **Laptop** | Lenovo V15 G3 IAP CTO (Product ID: 83C4) |
| **CPU** | 12th Gen Intel Core i5-1235U (Alder Lake) |
| **BIOS** | JKCN42WW (2023-09-06) |
| **Touchpad** | SYNA2BA6:00 06CB:CE2D (Synaptics I2C-HID) |
| **Touchpad HID Product** | 0018:06CB:CE2D |
| **I2C Controller** | Intel Alder Lake PCH Serial IO I2C Controller #1 (PCI 
00:15.1) |
| **I2C Bus Path** | 
`/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-SYNA2BA6:00` |
| **Kernel module** | `hid-multitouch` via `i2c_hid_acpi` → `i2c_hid` |
| **libinput** | 1.31.1 |

---

## Steps to Reproduce

1. Boot Lenovo V15 G3 IAP CTO with kernel `7.0.0-43-generic`.
2. Connect the original Lenovo AC charger (65W USB-C).
3. Move a finger across the touchpad.
4. **Observed:** The cursor jumps erratically. The Y-axis coordinate oscillates 
between two distant points (~300 and ~600 on a 0–804 range) at approximately 50 
Hz (mains AC frequency).
5. Disconnect the charger → cursor immediately becomes smooth.
6. Boot with kernel `7.0.0-42-generic`, connect charger → cursor is smooth, no 
jumping.

---

## Expected Behavior

The touchpad should function normally regardless of whether the AC
charger is connected, as it does on kernel `7.0.0-42-generic`.

---

## Actual Behavior (on 7.0.0-43)

### Journal logs (immediately after boot):

```
libinput error: event4 - SYNA2BA6:00 06CB:CE2D Touchpad: kernel bug: Touch jump 
detected and discarded.
libinput error: event4 - SYNA2BA6:00 06CB:CE2D Touchpad: kernel bug: Touch jump 
detected and discarded.
libinput error: event4 - SYNA2BA6:00 06CB:CE2D Touchpad: kernel bug: Touch jump 
detected and discarded.
libinput error: event4 - SYNA2BA6:00 06CB:CE2D Touchpad: kernel bug: Touch jump 
detected and discarded.
libinput error: event4 - SYNA2BA6:00 06CB:CE2D Touchpad: WARNING: log rate 
limit exceeded (5 msgs per 8min). Discarding future messages.
```

### Raw evdev coordinate data (3-second capture while charging on
7.0.0-43):

**223 large jumps (>30 units) detected in 3 seconds.** Sample:

```
Axis Y: from 610 to 324 (delta=286)
Axis Y: from 324 to 609 (delta=285)
Axis Y: from 586 to 319 (delta=267)
Axis Y: from 319 to 579 (delta=260)
Axis Y: from 579 to 303 (delta=276)
Axis Y: from 303 to 555 (delta=252)
```

The oscillation pattern at ~50 Hz strongly suggests AC mains ripple
coupling into the capacitive touchpad sensor, which the kernel
`7.0.0-42` driver filtered correctly but `7.0.0-43` does not.

### Touchpad axis info (fuzz=0, no hardware-level noise filtering):

```
ABS_X:              min=0, max=1224, fuzz=0, flat=0, res=12
ABS_Y:              min=0, max=804,  fuzz=0, flat=0, res=12
ABS_MT_POSITION_X:  min=0, max=1224, fuzz=0, flat=0, res=12
ABS_MT_POSITION_Y:  min=0, max=804,  fuzz=0, flat=0, res=12
```

### No ghost multi-touch:

Only one MT slot is active at any time — the jumping is not caused by
phantom finger detection.

---

## What was tried (did NOT fix the issue on 7.0.0-43):

- EC (Embedded Controller) hard reset (60s power button hold) — no effect
- Setting `fuzz=8` via `EVIOCSABS` ioctl — no effect (jumps are 250+ units, far 
beyond fuzz range)
- `libinput-gestures` stopped — no effect
- Autosuspend disabled (`power/control = on`) — no effect

---

## Bisection

| Kernel | Charger plugged in | Result |
|---|---|---|
| `7.0.0-42-generic` | Yes | ✅ Works perfectly |
| `7.0.0-43-generic` | Yes | ❌ Severe Y-axis jumping at 50 Hz |
| `7.0.0-43-generic` | No (battery) | ✅ Works perfectly |

---

## Suspected Subsystem

The regression is likely in one of:
- `drivers/hid/hid-multitouch.c` (coordinate processing or noise filtering)
- `drivers/hid/i2c-hid/` (I2C HID transport timing or power management)
- `drivers/i2c/busses/i2c-designware-*` (Designware I2C controller driver)

A change between `7.0.0-42` and `7.0.0-43` in any of these subsystems
may have altered how small-amplitude electrical noise from the AC
charger is handled by the touchpad input pipeline.

---

## Workaround

Boot with kernel `7.0.0-42-generic` and hold `linux-
image-7.0.0-43-generic`:

```bash
sudo apt-mark hold linux-image-7.0.0-43-generic
```

ProblemType: Bug
DistroRelease: Ubuntu 24.04
Package: linux-image-7.0.0-42-generic 7.0.0-42.42~24.04.1
ProcVersionSignature: Ubuntu 7.0.0-42.42~24.04.1-generic 7.0.14
Uname: Linux 7.0.0-42-generic x86_64
ApportVersion: 2.28.3-0ubuntu0.1
Architecture: amd64
AudioDevicesInUse:
 USER        PID ACCESS COMMAND
 /dev/snd/controlC0:  daler      3114 F.... wireplumber
 /dev/snd/seq:        daler      3109 F.... pipewire
CasperMD5CheckResult: pass
CurrentDesktop: ubuntu:GNOME
Date: Fri Nov 13 11:53:07 2026
InstallationDate: Installed on 2026-02-08 (278 days ago)
InstallationMedia: Ubuntu 24.04.3 LTS "Noble Numbat" - Release amd64 
(20250805.1)
MachineType: LENOVO 83C4
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-7.0.0-42-generic 
root=UUID=03ff6f52-ccc6-4971-9c75-9a733c088fc7 ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
 linux-restricted-modules-7.0.0-42-generic N/A
 linux-backports-modules-7.0.0-42-generic  N/A
 linux-firmware                            20240318.git3b128b60.0ubuntu3.1
SourcePackage: linux-hwe-7.0
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 09/06/2023
dmi.bios.release: 1.42
dmi.bios.vendor: LENOVO
dmi.bios.version: JKCN42WW
dmi.board.asset.tag: NO Asset Tag
dmi.board.name: LNVNB161216
dmi.board.vendor: LENOVO
dmi.board.version: SDK0T76463 WIN
dmi.chassis.asset.tag: NO Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Lenovo V15 G3 IAP CTO
dmi.ec.firmware.release: 1.42
dmi.modalias: 
dmi:bvnLENOVO:bvrJKCN42WW:bd09/06/2023:br1.42:efr1.42:svnLENOVO:pn83C4:pvrLenovoV15G3IAPCTO:rvnLENOVO:rnLNVNB161216:rvrSDK0T76463WIN:cvnLENOVO:ct10:cvrLenovoV15G3IAPCTO:skuLENOVO_MT_83C4_BU_idea_FM_V15G3IAPCTO:pfaV15G3IAPCTO:
dmi.product.family: V15 G3 IAP CTO
dmi.product.name: 83C4
dmi.product.sku: LENOVO_MT_83C4_BU_idea_FM_V15 G3 IAP CTO
dmi.product.version: Lenovo V15 G3 IAP CTO
dmi.sys.vendor: LENOVO

** Affects: linux-hwe-7.0 (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: amd64 apport-bug noble wayland-session

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2174367

Title:
  Touchpad cursor jumping regression on kernel 7.0.0-43 while charging

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-hwe-7.0/+bug/2174367/+subscriptions


-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to