Public bug reported:

I have a Razer Kiyo X webcam, USB ID 1532:0e06.

Recently, it started failing; it disconnects from the USB bus after some
seconds, when streaming video at 1920x1080@30fps. (It works and shows
video before that happens.)

This used to work fine and now doesn't.

Streaming video at 1280x720@60fps does not cause the problem.

I have recently upgraded from Ubuntu 24.04 to 26.04. I do not know
whether this is actually the cause -- I don't know whether the issue
started happening immediately after the upgrade, but it's suggestive.

This is a low-level issue, I think, because this statement fails:

$ v4l2-ctl   --set-fmt-video=width=1920,height=1080,pixelformat=MJPG   
--stream-mmap   --stream-count=100000   --stream-to=/dev/null
<<<<<<<<<<<<<<<<<<<<<<<<<<< 25.19 fps
<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 27.45 fps
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 29.76 fps
<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 29.78 fps
<<<<<<<<<<<<<<<<<<<<VIDIOC_DQBUF: failed: Invalid argument

even when the video is not being displayed on screen.

When the failure happens, this is entered into dmesg:

[266633.631067] usb 1-5: USB disconnect, device number 32
[266633.649214] audit: type=1400 audit(1794832170.058:731): apparmor="AUDIT" 
operation="exec" class="file" info="conflicting profile attachments" 
profile="unconfined" name="/opt/microsoft/msedge/msedge" pid=1530718 
comm="ThreadPoolSingl" requested_mask="x" fsuid=1000 ouid=0
[266634.001175] usb 1-5: new high-speed USB device number 33 using xhci_hcd
[266634.287943] usb 1-5: New USB device found, idVendor=1532, idProduct=0e06, 
bcdDevice= 0.46
[266634.287950] usb 1-5: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[266634.287951] usb 1-5: Product: Razer Kiyo X
[266634.287952] usb 1-5: Manufacturer: Razer Inc
[266634.287952] usb 1-5: SerialNumber: 01.00.00
[266634.316947] uvcvideo 1-5:1.0: Found UVC 1.00 device Razer Kiyo X (1532:0e06)
[266636.585508] usb 1-5: 3:1: cannot get freq at ep 0x86
[266636.792089] usb 1-5: 3:2: cannot get freq at ep 0x86
[266636.999089] usb 1-5: 3:3: cannot get freq at ep 0x86
[266638.080758] usb 1-5: Warning! Unlikely big volume range (=4096), cval->res 
is probably wrong.
[266638.080764] usb 1-5: [7] FU [Mic Capture Volume] ch = 1, val = 0/4096/1


and there is an audible "click" from the camera itself (which sounds like a 
relay or something).

I think the camera is crashing internally or something and disconnecting
from the bus and then reconnecting?

As mentioned, it does not fail at this:

v4l2-ctl   --set-fmt-video=width=1280,height=720,pixelformat=MJPG   
--stream-mmap   --stream-count=100000   --stream-to=/dev/null
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 50.60 fps
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 55.28 fps
... continues forever ...

and it only started failing recently, around the time of my update to
this kernel and 26.04.

$ cat /proc/version_signature
Ubuntu 7.0.0-43.43-generic 7.0.14

ProblemType: Bug
DistroRelease: Ubuntu 26.04
Package: linux-modules-7.0.0-43-generic 7.0.0-43.43
ProcVersionSignature: Ubuntu 7.0.0-43.43-generic 7.0.14
Uname: Linux 7.0.0-43-generic x86_64
ApportVersion: 2.34.1-0ubuntu0.1
Architecture: amd64
CasperMD5CheckResult: pass
CurrentDesktop: XFCE
Date: Mon Nov 16 12:24:49 2026
InstallationDate: Installed on 2025-11-17 (364 days ago)
InstallationMedia: Xubuntu 24.04.3 LTS "Noble Numbat" - Release amd64 
(20250805.1)
IwDevWlp9s0Link: Not connected.
MachineType: PCSpecialist Amd Am5 Sff Gaming
ProcEnviron:
 LANG=en_US.UTF-8
 PATH=(custom, no user)
 SHELL=/bin/bash
 TERM=xterm-256color
 XDG_RUNTIME_DIR=<set>
ProcFB: 0 nvidia-drmdrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-7.0.0-43-generic 
root=UUID=59c2012b-323e-4f64-abea-5a2bb6dff22e ro quiet splash
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
SourcePackage: linux
UpgradeStatus: Upgraded to resolute on 2026-11-09 (7 days ago)
dmi.bios.date: 09/19/2025
dmi.bios.release: 10.87
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 1087
dmi.board.asset.tag: Default string
dmi.board.name: ROG STRIX B850-I GAMING WIFI
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: Rev 1.xx
dmi.chassis.asset.tag: Default string
dmi.chassis.type: 3
dmi.chassis.vendor: Default string
dmi.chassis.version: Default string
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr1087:bd09/19/2025:br10.87:svnPCSpecialist:pnAmdAm5SffGaming:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnROGSTRIXB850-IGAMINGWIFI:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:sku3237038:pfaAmdAm5SffGamingSystems:
dmi.product.family: Amd Am5 Sff Gaming Systems
dmi.product.name: Amd Am5 Sff Gaming
dmi.product.sku: 3237038
dmi.product.version: System Version
dmi.sys.vendor: PCSpecialist

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: amd64 apport-bug resolute

** Description changed:

  I have a Razer Kiyo X webcam, USB ID 1532:0e06.
  
- Recently, it started failing; it disconnects from the USB bug, when
- streaming video at 1920x1080@30fps.
+ Recently, it started failing; it disconnects from the USB bus after some
+ seconds, when streaming video at 1920x1080@30fps. (It works and shows
+ video before that happens.)
  
- This used to work and now doesn't.
+ This used to work fine and now doesn't.
  
  Streaming video at 1280x720@60fps does not cause the problem.
  
  I have recently upgraded from Ubuntu 24.04 to 26.04. I do not know
  whether this is actually the cause -- I don't know whether the issue
  started happening immediately after the upgrade, but it's suggestive.
  
  This is a low-level issue, I think, because this statement fails:
  
  $ v4l2-ctl   --set-fmt-video=width=1920,height=1080,pixelformat=MJPG   
--stream-mmap   --stream-count=100000   --stream-to=/dev/null
  <<<<<<<<<<<<<<<<<<<<<<<<<<< 25.19 fps
  <<<<<<<<<<<<<<<<<<<<<<<<<<<<< 27.45 fps
  <<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 29.76 fps
  <<<<<<<<<<<<<<<<<<<<<<<<<<<<< 29.78 fps
  <<<<<<<<<<<<<<<<<<<<VIDIOC_DQBUF: failed: Invalid argument
  
  even when the video is not being displayed on screen.
  
  When the failure happens, this is entered into dmesg:
  
  [266633.631067] usb 1-5: USB disconnect, device number 32
  [266633.649214] audit: type=1400 audit(1794832170.058:731): apparmor="AUDIT" 
operation="exec" class="file" info="conflicting profile attachments" 
profile="unconfined" name="/opt/microsoft/msedge/msedge" pid=1530718 
comm="ThreadPoolSingl" requested_mask="x" fsuid=1000 ouid=0
  [266634.001175] usb 1-5: new high-speed USB device number 33 using xhci_hcd
  [266634.287943] usb 1-5: New USB device found, idVendor=1532, idProduct=0e06, 
bcdDevice= 0.46
  [266634.287950] usb 1-5: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
  [266634.287951] usb 1-5: Product: Razer Kiyo X
  [266634.287952] usb 1-5: Manufacturer: Razer Inc
  [266634.287952] usb 1-5: SerialNumber: 01.00.00
  [266634.316947] uvcvideo 1-5:1.0: Found UVC 1.00 device Razer Kiyo X 
(1532:0e06)
  [266636.585508] usb 1-5: 3:1: cannot get freq at ep 0x86
  [266636.792089] usb 1-5: 3:2: cannot get freq at ep 0x86
  [266636.999089] usb 1-5: 3:3: cannot get freq at ep 0x86
  [266638.080758] usb 1-5: Warning! Unlikely big volume range (=4096), 
cval->res is probably wrong.
  [266638.080764] usb 1-5: [7] FU [Mic Capture Volume] ch = 1, val = 0/4096/1
  
  
  and there is an audible "click" from the camera itself (which sounds like a 
relay or something).
  
  I think the camera is crashing internally or something and disconnecting
  from the bus and then reconnecting?
  
  As mentioned, it does not fail at this:
  
  v4l2-ctl   --set-fmt-video=width=1280,height=720,pixelformat=MJPG   
--stream-mmap   --stream-count=100000   --stream-to=/dev/null
  <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 50.60 fps
  <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 55.28 fps
  ... continues forever ...
  
  and it only started failing recently, around the time of my update to
  this kernel and 26.04.
  
  $ cat /proc/version_signature
  Ubuntu 7.0.0-43.43-generic 7.0.14
  
  ProblemType: Bug
  DistroRelease: Ubuntu 26.04
  Package: linux-modules-7.0.0-43-generic 7.0.0-43.43
  ProcVersionSignature: Ubuntu 7.0.0-43.43-generic 7.0.14
  Uname: Linux 7.0.0-43-generic x86_64
  ApportVersion: 2.34.1-0ubuntu0.1
  Architecture: amd64
  CasperMD5CheckResult: pass
  CurrentDesktop: XFCE
  Date: Mon Nov 16 12:24:49 2026
  InstallationDate: Installed on 2025-11-17 (364 days ago)
  InstallationMedia: Xubuntu 24.04.3 LTS "Noble Numbat" - Release amd64 
(20250805.1)
  IwDevWlp9s0Link: Not connected.
  MachineType: PCSpecialist Amd Am5 Sff Gaming
  ProcEnviron:
   LANG=en_US.UTF-8
   PATH=(custom, no user)
   SHELL=/bin/bash
   TERM=xterm-256color
   XDG_RUNTIME_DIR=<set>
  ProcFB: 0 nvidia-drmdrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-7.0.0-43-generic 
root=UUID=59c2012b-323e-4f64-abea-5a2bb6dff22e ro quiet splash
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  SourcePackage: linux
  UpgradeStatus: Upgraded to resolute on 2026-11-09 (7 days ago)
  dmi.bios.date: 09/19/2025
  dmi.bios.release: 10.87
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1087
  dmi.board.asset.tag: Default string
  dmi.board.name: ROG STRIX B850-I GAMING WIFI
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Default string
  dmi.chassis.type: 3
  dmi.chassis.vendor: Default string
  dmi.chassis.version: Default string
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr1087:bd09/19/2025:br10.87:svnPCSpecialist:pnAmdAm5SffGaming:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnROGSTRIXB850-IGAMINGWIFI:rvrRev1.xx:cvnDefaultstring:ct3:cvrDefaultstring:sku3237038:pfaAmdAm5SffGamingSystems:
  dmi.product.family: Amd Am5 Sff Gaming Systems
  dmi.product.name: Amd Am5 Sff Gaming
  dmi.product.sku: 3237038
  dmi.product.version: System Version
  dmi.sys.vendor: PCSpecialist

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2174592

Title:
  Razer Kiyo X, USB ID 1532:0e06, 1920×1080 MJPEG @ 30fps causes a USB
  disconnect/reconnect on Ubuntu 26.04.1 kernel 7.0.0-43, while
  1280×720@60fps remains stable

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2174592/+subscriptions


-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to