Still affected - and I have found the cause and a working fix.

Hardware: Dell Pro 14 Plus PB14250 (BIOS 2.19.0), Core Ultra 7 255U (Arrow 
Lake, not Meteor Lake as the title says), IPU6 8086:7d19. The OV05C10 sensor 
(OVTI05C1) is shared with an Intel CVS chip (INTC10E0, intel_cvs) behind the 
Synaptics SVP7500 USB-IO bridge (06cb:0701).
Software: Ubuntu 24.04; reproduced on 6.17.0-1033-oem and 7.0.0-43-generic 
(HWE). libcamhal-ipu6epmtl 0~git202601200757.9899efa~ubuntu24.04.1, 
gstreamer1.0-icamera 0~git202509260937.4fb31db~ubuntu24.04.5, v4l2-relayd 
0.1.2-0ubuntu3.1.

Symptom on both kernels: the first one or two camera sessions after boot work, 
the next one gets no frames at all:
  CamHAL[ERR] Poll: Device node fd 25 poll timeout.
  CamHAL[INF] Sof poll time out.
and when the stream is stopped:
  intel_ipu6_isys.isys intel_ipu6.isys.40: stream stop time out
Restarting v4l2-relayd or reloading intel_ipu6*/ov05c10 does not help; only a 
reboot does.

Cause: the ov05c10 stream-on and soft-standby register sequences do not follow 
the CVS firmware control flow. Intel fixed this upstream in ipu6-drivers PR 
#456, "media: ov05c10 : update command to meet CVS & different resolution mode" 
(merged 2026-08-19, commit 71bddb5):
https://github.com/intel/ipu6-drivers/pull/456

Ubuntu's packaged ov05c10 does not contain this yet. Its srcversion is
E8D30BFD8DE88D04621FA49 in both linux-modules-ipu6-6.17.0-1033-oem
6.17.0-1033.33 and linux-main-modules-ipu6-7.0.0-43-generic
7.0.0-43.43~24.04.1, and building drivers/media/i2c/ov05c10.c from
intel/ipu6-drivers c09fa9a (the parent of the fix) gives exactly that
srcversion.

Verification: I applied only the two hunks of PR #456 that change
ov05c10_streaming[] and ov05c10_soft_standby[] to c09fa9a (no
timing/exposure changes) and built it with DKMS for 6.17.0-1033-oem and
7.0.0-43-generic. The camera now works for every session without a
reboot. The same backport is used for this model in
https://github.com/mdchia/dell-PB14250-RGB-camera-fix-linux

Request: please pick up the stream-on/standby change from ipu6-drivers
PR #456 (or the whole PR) in the noble ipu6 modules for linux-oem-6.17
and linux-hwe-7.0.

Related observations, in case they are useful:
- oem-somerville-typhlosion-meta ships /etc/default/grub.d/oem-flavour.cfg with 
GRUB_FLAVOUR_ORDER=oem. Since linux-oem-24.04b/d now point to 7.0.0-43-generic, 
GRUB keeps booting the old 6.17.0-1033-oem kernel by default, so these machines 
silently stop getting kernel updates.
- On 7.0.0-43-generic, intel_cvs triggers "WARNING: kernel/irq/manage.c:1502 at 
__setup_irq" from cvs_common_probe during boot (not seen on 6.17).
- Unloading intel_cvs (modprobe -r) resets the SVP7500, and the re-created 
sensor device then fails with "ov05c10 i2c-OVTI05C1:00: endpoint node not 
found" until reboot.


** Changed in: linux-oem-6.17 (Ubuntu)
       Status: Expired => Confirmed

** Also affects: ipu6-drivers (Ubuntu)
   Importance: Undecided
       Status: New

** Summary changed:

- Intel IPU6 Meteor Lake camera (OV05C1 via USBIO) works only once after boot
+ Dell Pro 14 Plus (OV05C10 + Intel CVS): camera works only once per boot - 
needs ipu6-drivers PR #456

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2146808

Title:
  Dell Pro 14 Plus (OV05C10 + Intel CVS): camera works only once per
  boot - needs ipu6-drivers PR #456

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ipu6-drivers/+bug/2146808/+subscriptions


-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to