Public bug reported:

This bug targets the linux-amd-embedded kernel (Ubuntu 26.04 Resolute,
7.0, amd64). linux-amd-embedded is not yet available in the archive, so
the bug is filed against the linux package for now.

[Impact]
The maxim-serdes GMSL framework in linux-amd-embedded (LP: #2174067) cannot be 
used with the ADI GMSL tunnel-mode serializers and deserializers (MAX96719A, 
MAX96723A, MAX96726A):
 * The framework assumes one serializer pipe per GMSL link and one stream ID 
per serializer, so serializers with several MIPI inputs and pipes on one link 
(MAX96723A) cannot be supported.
 * A serializer has only one sink pad, and the deserializer always uses the 
first pipe of a link.
 * Serializers without their own VC remapping cannot remap the virtual 
channels, as the remaps are not forwarded to the sensor.

[Fix]
 * UBUNTU: SAUCE patches from the ADI GMSL tree, ported to the upstream 
maxim-serdes framework in linux-amd-embedded:
   - media: i2c: maxim-serdes: max_ser: allow VC remaps to be forwarded to 
source
   - media: i2c: maxim-serdes: add per-pipe stream ID negotiation
   - media: i2c: maxim-serdes: add multi-PHY serializer support

[Test Plan]
 * Build the linux-amd-embedded kernel for all flavours and check that 
updateconfigs passes.
 * Boot the kernel in an LXD VM and load the max-serdes, max96717 and max96724 
(with manual_instantiate=0) modules.
 * On hardware with the GMSL cameras (LP: #2174613), check that streaming from 
all cameras still works.

[Where problems could occur]
The changes affect the core of the maxim-serdes framework, which is also used 
by the MAX96717 and MAX96724 drivers and the GMSL camera support for the AMD 
ISP4: the programming of the stream IDs, the selection of the deserializer 
pipe, the VC remapping, and the update of the pipes when a stream starts or 
stops. A regression could cause GMSL cameras that do not come up, or missing or 
corrupted frames. MAX96717 has no per-pipe stream ID support and keeps the 
previous stream ID programming. The test pattern generator pads stay disabled, 
as in the upstream framework.

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New

** Affects: linux (Ubuntu Resolute)
     Importance: High
     Assignee: Krystian Kaniewski (kkaniewski)
         Status: Confirmed

** Also affects: linux (Ubuntu Resolute)
   Importance: Undecided
       Status: New

** Changed in: linux (Ubuntu Resolute)
   Importance: Undecided => High

** Changed in: linux (Ubuntu Resolute)
       Status: New => Confirmed

** Changed in: linux (Ubuntu Resolute)
     Assignee: (unassigned) => Krystian Kaniewski (kkaniewski)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2174748

Title:
  linux-amd-embedded: Add multi-pipe GMSL serializer support to the
  maxim-serdes framework

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2174748/+subscriptions


-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to