Public bug reported:
Since upgrading from linux-image 7.0.0-42.42~24.04.1 to
7.0.0-43.43~24.04.1 (HWE, Ubuntu 24.04 base / Zorin OS 18.1), the
internal Bluetooth controller of an iMac17,1 (Late 2015) no longer
initialises. BlueZ reports "No default controller available" and hci0
stays DOWN with BD address 00:00:00:00:00:00.
Booting 7.0.0-42 from the GRUB menu restores Bluetooth immediately,
including directly after a warm reboot from a failing 7.0.0-43 boot.
Both kernels are based on upstream 7.0.14, so the regression appears to
be in the Ubuntu delta between -42 and -43.
Expected: hci0 initialises and Bluetooth works (as on 7.0.0-42).
Actual: hci0 reset times out, no Bluetooth adapter.
HARDWARE / VERSIONS
- Machine: Apple iMac17,1, firmware 529.120.1.0.0
- Bluetooth: Broadcom BCM20703A1, USB 05ac:8294 ("Bluetooth USB Host
Controller", btusb + HID proxy interfaces)
- Failing: Ubuntu 7.0.0-43.43~24.04.1-generic 7.0.14
- Working: Ubuntu 7.0.0-42.42~24.04.1-generic 7.0.14
- linux-firmware 20240318.git3b128b60.0ubuntu3.1, bluez 5.72-0ubuntu5.8
7.0.0-43 (fails on every boot, 2 of 2 tested; warm reboot and
shutdown/power-on):
kernel: Linux version 7.0.0-43-generic ... (Ubuntu
7.0.0-43.43~24.04.1-generic 7.0.14)
kernel: usb 1-6: new full-speed USB device number 5 using xhci_hcd
kernel: Bluetooth: hci0: command 0x0c03 tx timeout
kernel: Bluetooth: hci0: BCM: Reset failed (-110)
kernel: usb 1-6: Failed to suspend device, error -110
Reloading btusb (modprobe -r btusb; modprobe btusb) and disabling USB
autosuspend (btusb enable_autosuspend=0, power/control=on) do not help.
7.0.0-42 (works on every boot, 4 of 4, incl. warm reboot straight from a
failing -43 boot):
kernel: Linux version 7.0.0-42-generic ... (Ubuntu
7.0.0-42.42~24.04.1-generic 7.0.14)
kernel: usb 1-6: new full-speed USB device number 5 using xhci_hcd
kernel: Bluetooth: hci0: BCM: chip id 102 build 0730
kernel: Bluetooth: hci0: BCM: product 05ac:8294
kernel: Bluetooth: hci0: BCM: features 0x2f
kernel: Bluetooth: hci0: BCM20703A1 Generic USB UHE Apple 20Mhz fcbga_X238D
POSSIBLY RELEVANT
- The -43 changelog contains several Bluetooth core changes from upstream
stable patchsets (LP: #2171596, #2171601), e.g. "hci_sync: don't drain cmd_sync
backlog on unregister", "hci_sync: Fix command skb lifetime during scan setup",
"hci_core: free the HCI ID if naming fails". None touch btbcm/btusb Broadcom
code directly.
- The same symptom on the same device is described as a warm-reboot issue in
https://github.com/omacom/omarchy/pull/15413 (worked around with a USB port
power cycle), but here -42 initialises fine after a warm reboot while -43 does
not.
- Related upstream patch: "Bluetooth: btbcm: Fix reset errors at setup"
https://lkml.iu.edu/hypermail/linux/kernel/2502.1/07346.html
WORKAROUND
Boot 7.0.0-42 (grub-set-default to the -42 entry).
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: bluetooth noble regression-update
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2174996
Title:
Regression in 7.0.0-43: Broadcom BCM20703 Bluetooth (Apple 05ac:8294)
fails with "BCM: Reset failed (-110)", no adapter
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2174996/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs