lspci give me an error when I try to use the "w" flag, I did sudo lspci -vnn > lspci.txt instead also, I couldn't run lshal because the HAL package is not installed and I have no way to install it.
I will attach files in a later message. For now, I thought I'd record my screen (as best I could) at the point where the boot process dies >-----| Top of Screen |-----< sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] 503808 512-byte hardware sectors (258 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Assuming drive cache: write through sda:<5>pccard: PCMCIA card inserted into slot 0 sda1 sd 0:0:0:0: [sda] Attached SCSI removable disc Synaptics Touchpad, model: 1, fw: 5.8, id: 0x2348b3, caps: 0x904713/0x10008 sd 0:0:0:0: Attached scsi generic sg0 type 0 input: SynPS/2 Synaptics TouchPad as /class/input/input3 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x379, irq 7 [PCSPP,TRISTATE,EPP] cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia: registering new device pcmcia0.0 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 ACPI: PCI Interrupt 000:00:06.0[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5 >-----| Bottom of Screen |-----< On Tue, Mar 18, 2008 at 3:56 AM, Gareth Fitzworthington <[EMAIL PROTECTED]> wrote: > Can all those experiencing this issue attach the following text files: > > sudo lspci -vvvnn > lspci.txt # Note: sudo allows for capabilities to be > captured also. > sudo dmidecode > dmidecode.txt # Note: sudo is required for this because > /dev/mem is read. > lshal > hal.txt > > Also, please submit dmesg log which includes the error upon card insertion > (especially those with more recent kernels). > Thanks. > > ** Changed in: linux-source-2.6.22 (Ubuntu) > Status: New => Incomplete > > ** Summary changed: > > > - Inserting Orinoco pcmcia card causes hard lockup > + Orinoco pcmcia card - Insertion causes hard lockup > > -- > Orinoco pcmcia card - Insertion causes hard lockup > > https://bugs.launchpad.net/bugs/56251 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in Source Package "linux-source-2.6.15" in Ubuntu: Incomplete > Status in Source Package "linux-source-2.6.20" in Ubuntu: Incomplete > Status in Source Package "linux-source-2.6.22" in Ubuntu: Incomplete > > > Status in Source Package "linux-source-2.6.20" in Baltix GNU/Linux: Incomplete > > Bug description: > Binary package hint: linux-image-2.6.15-26-powerpc > > When the pcmcia module is already installed on my wallstreet powerbook, > inserting my wavelan silver pcmcia card causes an instant hard lockup. > > When the card is already inserted and I an attempt is made to load the > pcmcia driver, a very long wait follows, after which lsmod shows the module > as being loaded, but the card does not show up when I bring up the network > config window. > > Here are the boot kernel messages up to the point at which it thinks it has > finished loading the pcmcia driver: > > [ 0.000000] Total memory = 192MB; using 512kB for hash table (at cbf80000) > [ 0.000000] Linux version 2.6.15-26-powerpc ([EMAIL PROTECTED]) (gcc > version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 Thu Aug 3 02:53:39 UTC 2006 > [ 0.000000] Found initrd at 0xc037c000:0xc0bb972f > [ 0.000000] Found a Gatwick mac-io controller, rev: 1, mapped at > 0xfdf80000 > [ 0.000000] Found a Heathrow mac-io controller, rev: 1, mapped at > 0xfdf00000 > [ 0.000000] PowerMac motherboard: PowerBook Wallstreet > [ 0.000000] Found Grackle (MPC106) PCI host bridge at 0x80000000. > Firmware bus number: 0->0 > [ 0.000000] L2CR overridden (0x68fff740), backside cache is disabled > [ 0.000000] PMU driver 2 initialized for PowerBook G3 Series, firmware: 0a > [ 0.000000] nvram: OF partition at 0x1800 > [ 0.000000] nvram: XP partition at 0x1300 > [ 0.000000] nvram: NR partition at 0x1400 > [ 0.000000] Top of RAM: 0xc000000, Total RAM: 0xc000000 > [ 0.000000] Memory hole size: 0MB > [ 0.000000] On node 0 totalpages: 49152 > [ 0.000000] DMA zone: 49152 pages, LIFO batch:15 > [ 0.000000] DMA32 zone: 0 pages, LIFO batch:0 > [ 0.000000] Normal zone: 0 pages, LIFO batch:0 > [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 > [ 0.000000] Built 1 zonelists > [ 0.000000] Kernel command line: ramdisk_size=8192 root=/dev/hda9 > video=atyfb:vmode:14,cmode:32,mclk:63 > [ 0.000000] irq: fixed SCC on gatwick (79,68,69) > [ 0.000000] irq: fixed media-bay on gatwick (93) > [ 0.000000] irq: fixed floppy on second controller (83,65) > [ 0.000000] irq: fixed ide on second controller (78,67) > [ 0.000000] irq: Found primary Apple PIC /pci/mac-io for 64 irqs > [ 0.000000] irq: Found slave Apple PIC /pci/mac-io for 64 irqs cascade: 27 > [ 0.000000] irq: System has 128 possible interrupts > [ 0.000000] PID hash table entries: 1024 (order: 10, 16384 bytes) > [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off > [ 0.000000] time_init: decrementer frequency = 16.670633 MHz > [ 0.000000] time_init: processor frequency = 400.000000 MHz > [ 24.492572] Console: colour dummy device 80x25 > [ 24.494294] Dentry cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 24.496573] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > [ 24.529688] High memory: 0k > [ 24.529754] Memory: 182144k/196608k available (2692k kernel code, 14340k > reserved, 276k data, 304k bss, 180k init) > [ 24.530269] Calibrating delay loop... 33.28 BogoMIPS (lpj=66560) > [ 24.612344] Security Framework v1.0.0 initialized > [ 24.612424] SELinux: Disabled at boot. > [ 24.612531] Mount-cache hash table entries: 512 > [ 24.613394] device-tree: property "l2-cache" name conflicts with node in > /cpus/PowerPC,750 > [ 24.616514] checking if image is initramfs... it is > [ 28.932477] Freeing initrd memory: 8437k freed > [ 28.938169] NET: Registered protocol family 16 > [ 28.939211] Registering pmac pic with sysfs... > [ 28.939612] PCI: Probing PCI hardware > [ 28.943886] PCI: Cannot allocate resource region 2 of device 0000:00:11.0 > [ 28.950459] Thermal assist unit using timers, shrink_timer: 500 jiffies > [ 28.957200] audit: initializing netlink socket (disabled) > [ 28.957344] audit(1155476839.460:1): initialized > [ 28.958263] VFS: Disk quotas dquot_6.5.1 > [ 28.958474] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 28.958845] Initializing Cryptographic API > [ 28.958924] io scheduler noop registered > [ 28.958981] io scheduler anticipatory registered > [ 28.959029] io scheduler deadline registered > [ 28.959131] io scheduler cfq registered > [ 28.960335] PCI: Enabling device 0000:00:11.0 (0086 -> 0087) > [ 28.960440] atyfb: using auxiliary register aperture > [ 28.961387] atyfb: 3D RAGE LT PRO (Mach64 LP, PCI) [0x4c50 rev 0xdc] > [ 28.961460] atyfb: 4M SGRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 63 > Mhz MCLK, 100 MHz XCLK > [ 29.044880] Console: switching to colour frame buffer device 128x48 > [ 29.045173] atyfb: fb0: ATY Mach64 frame buffer device on PCI > [ 29.299462] Macintosh non-volatile memory driver v1.1 > [ 29.300391] IN from bad port 64 at c018d2a8 > [ 29.300473] IN from bad port 60 at c018d2dc > [ 29.300489] IN from bad port 64 at c018d2a8 > [ 29.300554] IN from bad port 60 at c018d2dc > [ 29.300571] IN from bad port 64 at c018d2a8 > [ 29.300636] IN from bad port 60 at c018d2dc > [ 29.300652] IN from bad port 64 at c018d2a8 > [ 29.300717] IN from bad port 60 at c018d2dc > [ 29.300734] IN from bad port 64 at c018d2a8 > [ 29.300799] IN from bad port 60 at c018d2dc > [ 29.300815] IN from bad port 64 at c018d2a8 > [ 29.300880] IN from bad port 60 at c018d2dc > [ 29.300897] IN from bad port 64 at c018d2a8 > [ 29.300962] IN from bad port 60 at c018d2dc > [ 29.300978] IN from bad port 64 at c018d2a8 > [ 29.301043] IN from bad port 60 at c018d2dc > [ 29.301060] IN from bad port 64 at c018d2a8 > [ 29.301124] IN from bad port 60 at c018d2dc > [ 29.301141] IN from bad port 64 at c018d2a8 > [ 29.301206] IN from bad port 60 at c018d2dc > [ 29.301223] IN from bad port 64 at c018d2a8 > [ 29.301287] IN from bad port 60 at c018d2dc > [ 29.301304] IN from bad port 64 at c018d2a8 > [ 29.301369] IN from bad port 60 at c018d2dc > [ 29.301385] IN from bad port 64 at c018d2a8 > [ 29.301450] IN from bad port 60 at c018d2dc > [ 29.301467] IN from bad port 64 at c018d2a8 > [ 29.301532] IN from bad port 60 at c018d2dc > [ 29.301548] IN from bad port 64 at c018d2a8 > [ 29.301613] IN from bad port 60 at c018d2dc > [ 29.301630] IN from bad port 64 at c018d2a8 > [ 29.301694] IN from bad port 60 at c018d2dc > [ 29.301711] IN from bad port 64 at c018d2a8 > [ 29.301725] i8042.c: No controller found. > [ 29.307433] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 > blocksize > [ 29.308822] MacIO PCI driver attached to Gatwick chipset > [ 29.309137] MacIO PCI driver attached to Heathrow chipset > [ 29.318621] mediabay0: Registered Heathrow media-bay > [ 29.318907] mediabay0: powering down > [ 29.552154] mediabay0: switching to 3 > [ 29.552326] mediabay0: powering up > [ 29.776156] mediabay0: enabling (kind:3) > [ 29.840152] mediabay0: waiting reset (kind:3) > [ 29.968152] mediabay0: waiting IDE reset (kind:3) > [ 31.120153] mediabay0: waiting IDE ready (kind:3) > [ 31.152150] mediabay0: up before IDE init > [ 31.152561] mediabay1: Registered Heathrow media-bay > [ 31.152789] mediabay1: powering down > [ 31.388758] input: Macintosh mouse button emulation as /class/input/input0 > [ 31.389955] Registered "pmu" backlight controller,level: 15/15 > [ 31.390765] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > [ 31.391088] ide: Assuming 33MHz system bus speed for PIO modes; override > with idebus=xx > [ 31.391503] adb: starting probe task... > [ 32.412178] ide0: Found Apple Heathrow ATA controller, bus ID 0, irq 13 > [ 32.421713] Probing IDE interface ide0... > [ 32.708344] hda: IBM-DYLA-28100, ATA DISK drive > [ 33.388188] hda: Enabling MultiWord DMA 2 > [ 33.398642] ide0 at 0xcd016000-0xcd016007,0xcd016160 on irq 13 > [ 33.408933] Registered ide1 for media bay 0 > [ 33.408982] ide1: Found Apple Heathrow ATA controller, bus ID 1 > (mediabay), irq 14 > [ 33.418713] Probing IDE interface ide1... > [ 33.537552] adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f > [ 33.563311] ADB keyboard at 2, handler 1 > [ 33.572732] Detected ADB keyboard, type ANSI. > [ 33.582760] input: ADB keyboard as /class/input/input1 > [ 33.592890] input: ADB Powerbook buttons as /class/input/input2 > [ 33.614194] ADB mouse at 3, handler set to 4 (trackpad) > [ 33.679640] input: ADB mouse as /class/input/input3 > [ 33.689017] adb: finished probe task... > [ 33.824351] hdc: MATSHITA CR-174, ATAPI CD/DVD-ROM drive > [ 34.168204] hdc: Enabling MultiWord DMA 2 > [ 34.178621] ide1 at 0xcd01c000-0xcd01c007,0xcd01c160 on irq 14 > [ 34.188763] ide2: Found Apple Heathrow ATA controller, bus ID 4 > (mediabay), irq 78 > [ 34.200106] mice: PS/2 mouse device common for all mice > [ 34.210633] NET: Registered protocol family 2 > [ 34.260544] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) > [ 34.271565] TCP established hash table entries: 8192 (order: 3, 32768 > bytes) > [ 34.282003] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) > [ 34.292416] TCP: Hash tables configured (established 8192 bind 8192) > [ 34.302483] TCP reno registered > [ 34.312888] TCP bic registered > [ 34.322672] NET: Registered protocol family 1 > [ 34.332264] NET: Registered protocol family 8 > [ 34.341625] NET: Registered protocol family 20 > [ 34.351157] Freeing unused kernel memory: 180k init > [ 34.954821] Capability LSM initialized > [ 39.915594] hda: max request size: 128KiB > [ 39.924834] hda: 16007040 sectors (8195 MB) w/459KiB Cache, > CHS=15880/16/63, (U)DMA > [ 39.934288] hda: cache flushes not supported > [ 39.944094] hda:<6>hdc: ATAPI 20X CD-ROM drive, 128kB Cache, DMA > [ 39.973910] Uniform CD-ROM driver Revision: 3.20 > [ 42.480042] [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 > hda11 hda12 > [ 45.130298] Attempting manual resume > [ 45.561288] ReiserFS: hda9: found reiserfs format "3.6" with standard > journal > [ 46.494218] ReiserFS: hda9: using ordered data mode > [ 46.534907] ReiserFS: hda9: journal params: device hda9, size 8192, > journal first block 18, max trans len 1024, max batch 900, max commit age 30, > max trans age 30 > [ 46.569995] ReiserFS: hda9: checking transaction log (hda9) > [ 47.122730] ReiserFS: hda9: replayed 3 transactions in 0 seconds > [ 47.550944] ReiserFS: hda9: Using r5 hash to sort names > [ 62.638355] ts: Compaq touchscreen protocol output > [ 71.308790] Yenta: CardBus bridge found at 0000:00:13.0 [0000:0000] > [ 71.318614] PCI: Bus 1, cardbus bridge: 0000:00:13.0 > [ 71.328193] IO window: 00001000-000011ff > [ 71.337656] IO window: 00001400-000015ff > [ 71.347072] PREFETCH window: 80400000-807fffff > [ 71.356494] MEM window: 80800000-80bfffff > [ 71.366223] Yenta: ISA IRQ mask 0x0000, PCI irq 22 > [ 71.375972] Socket status: 30000086 > [ 71.385690] pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff > [ 71.395505] pcmcia: parent PCI bridge Memory window: 0x80000000 - > 0xfcffffff > [ 71.405422] pcmcia: parent PCI bridge Memory window: 0xfd000000 - > 0xfdffffff > [ 71.416242] Yenta: CardBus bridge found at 0000:00:13.1 [0000:0000] > [ 71.426274] PCI: Bus 5, cardbus bridge: 0000:00:13.1 > [ 71.436130] IO window: 00001800-000019ff > [ 71.445854] IO window: 00001c00-00001dff > [ 71.455358] PREFETCH window: 80c00000-80ffffff > [ 71.464809] MEM window: 81000000-813fffff > [ 72.462194] Yenta: ISA IRQ mask 0x0000, PCI irq 23 > [ 72.471680] Socket status: 30000459 > [ 72.481027] pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff > [ 72.491101] pcmcia: parent PCI bridge Memory window: 0x80000000 - > 0xfcffffff > [ 72.500708] pcmcia: parent PCI bridge Memory window: 0xfd000000 - > 0xfdffffff > [ 73.572180] pccard: PCMCIA card inserted into slot 1 > [ 73.896198] cs: memory probe 0x80000000-0xfcffffff: excluding > 0x80000000-0x82ffffff 0xf3000000-0xf37fffff 0xf4000000-0xf47fffff > [ 74.029742] cs: memory probe 0xfd000000-0xfdffffff:Machine check in > kernel mode. > [ 74.040650] Caused by (from SRR1=49030): Transfer error ack signal > [ 74.050594] Oops: Machine check, sig: 7 [#1] > [ 74.060212] Modules linked in: pcmcia yenta_socket rsrc_nonstatic > pcmcia_core tsdev evdev reiserfs ide_disk ide_cd cdrom i2c_keywest capability > commoncap > [ 74.080094] NIP: CD8935F4 LR: CD8935CC CTR: C00259A0 > [ 74.089938] REGS: cb7ffbe0 TRAP: 0200 Not tainted (2.6.15-26-powerpc) > [ 74.099911] MSR: 00049030 <EE,ME,IR,DR> CR: 82004424 XER: 00000100 > [ 74.110010] TASK = c041b850[2788] 'modprobe' THREAD: cb7fe000 > [ 74.110239] GPR00: 000000FF CB7FFC90 C041B850 CD882000 CD07E014 00000070 > 00000002 CB7FFCE9 > [ 74.120518] GPR08: C0A57208 00001000 CD883000 CD882000 22002422 1001E354 > CADA4C80 00200000 > [ 74.131100] GPR16: CADA4C80 CD890000 CD890000 00000000 CADA4C80 FD000000 > 00100000 000004FB > [ 74.141807] GPR24: CB7FFCE9 00000002 00000021 00000000 CBB97428 00000000 > 00000002 CB7FFCE9 > [ 74.163101] NIP [CD8935F4] pcmcia_read_cis_mem+0x194/0x290 [pcmcia_core] > [ 74.174124] LR [CD8935CC] pcmcia_read_cis_mem+0x16c/0x290 [pcmcia_core] > [ 74.185006] Call Trace: > [ 74.195679] [CB7FFC90] [CD8935CC] pcmcia_read_cis_mem+0x16c/0x290 > [pcmcia_core] (unreliable) > [ 74.206788] [CB7FFCC0] [CD893864] read_cis_cache+0x174/0x180 [pcmcia_core] > [ 74.217746] [CB7FFCE0] [CD893A30] pccard_get_next_tuple+0x100/0x4a0 > [pcmcia_core] > [ 74.228835] [CB7FFD20] [CD893E6C] pccard_get_first_tuple+0x9c/0x160 > [pcmcia_core] > [ 74.239965] [CB7FFD50] [CD894098] pccard_validate_cis+0xa8/0x260 > [pcmcia_core] > [ 74.251117] [CB7FFD80] [CD887090] readable+0x50/0xb0 [rsrc_nonstatic] > [ 74.262251] [CB7FFDA0] [CD887E0C] > pcmcia_nonstatic_validate_mem+0x1ac/0x350 [rsrc_nonstatic] > [ 74.273447] [CB7FFE00] [CD894624] pcmcia_validate_mem+0x24/0x40 > [pcmcia_core] > [ 74.284657] [CB7FFE10] [CD8C3874] pcmcia_card_add+0x44/0xd0 [pcmcia] > [ 74.295863] [CB7FFE80] [CD8C3B34] ds_event+0x1b4/0x1e0 [pcmcia] > [ 74.307127] [CB7FFEA0] [CD890A8C] send_event+0x7c/0xe0 [pcmcia_core] > [ 74.318454] [CB7FFEB0] [CD8910D4] pccard_register_pcmcia+0xc4/0xe0 > [pcmcia_core] > [ 74.329856] [CB7FFED0] [CD8C3D7C] pcmcia_bus_add_socket+0x9c/0xf0 [pcmcia] > [ 74.341305] [CB7FFEF0] [C0192320] class_interface_register+0xc0/0x120 > [ 74.352711] [CB7FFF10] [CD03E024] init_pcmcia_bus+0x24/0x40 [pcmcia] > [ 74.364102] [CB7FFF20] [C004E0F8] sys_init_module+0x128/0x310 > [ 74.375447] [CB7FFF40] [C001167C] ret_from_syscall+0x0/0x4c > [ 74.386875] --- Exception: c01 at 0xff7325c > [ 74.398198] LR = 0x10003b50 > [ 74.409353] Instruction dump: > [ 74.421989] 7f45d378 4bffe6d9 2c030000 418200f0 813c0108 3809ffff > 7d434a14 7fa00038 > [ 74.433833] 7d630214 7f8a5800 419effc4 7c0300ae <0c000000> 4c00012c > 34beffff 981f0000 > [ 74.445677] <6>input: PowerMac Beep as /class/input/input4 > [ 245.128800] eth0: BMAC at 00:05:02:87:5c:f8 > [ 246.333663] phy registers: > [ 246.333857] 0000 0000 0000 0000 0000 0000 0000 0000 > [ 246.355821] 0000 0000 0000 0000 0000 0000 0000 0000 > [ 246.377425] 0000 0000 0000 0000 0000 0000 0000 0000 > [ 246.398748] 0000 0000 0000 0000 0000 0000 0000 0000 > [ 246.725190] Adding 338088k swap on /dev/hda11. Priority:-1 extents:1 > across:338088k > [ 247.838464] NET: Registered protocol family 17 > > > Description of problem from > http://lists.infradead.org/pipermail/linux-pcmcia/2006-April/003488.html : > I see from the dmesg output from my original post that memory ranges > 0xfdd7f000 and 0xfddff000 are used by the Gatwick and Heathrow mac io > controllers. That explains the conflict with PCMCIA over 0xfd000000. > > Using kernel 2.6.17, and reserve=0xfd000000,0xffffff as a kernel argument is > a temporary fix. > http://lists.infradead.org/pipermail/linux-pcmcia/2007-April/004503.html > > -- Orinoco pcmcia card - Insertion causes hard lockup https://bugs.launchpad.net/bugs/56251 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
