[ 0.000000] Linux version 2.6.24-16-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4ce0 [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6650 checksum 0 [ 0.000000] ACPI: RSDP 000F6650, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: DSDT 3FFF30C0, 3967 (r1 GBT AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF6A40, 005A (r1 GBT AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=231256ee-512b-415d-a287-5b2408b00dd2 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1835.950 MHz processor. [ 17.731250] Console: colour VGA+ 80x25 [ 17.731254] console [tty0] enabled [ 17.732100] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 17.732745] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 17.773976] Memory: 1027392k/1048512k available (2157k kernel code, 20372k reserved, 998k data, 364k init, 131008k highmem) [ 17.773986] virtual kernel memory layout: [ 17.773987] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 17.773988] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 17.773990] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 17.773991] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 17.773992] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 17.773994] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 17.773995] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 17.773999] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 17.774064] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 17.853979] Calibrating delay using timer specific routine.. 3673.90 BogoMIPS (lpj=7347805) [ 17.854027] Security Framework initialized [ 17.854037] SELinux: Disabled at boot. [ 17.854068] AppArmor: AppArmor initialized [ 17.854074] Failure registering capabilities with primary security module. [ 17.854087] Mount-cache hash table entries: 512 [ 17.854290] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 17.854302] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 17.854305] CPU: L2 Cache: 512K (64 bytes/line) [ 17.854309] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000 [ 17.854325] Compat vDSO mapped to ffffe000. [ 17.854342] Checking 'hlt' instruction... OK. [ 17.870266] SMP alternatives: switching to UP code [ 17.871591] Freeing SMP alternatives: 11k freed [ 17.871742] Early unpacking initramfs... done [ 18.231190] ACPI: Core revision 20070126 [ 18.231308] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.386590] CPU0: AMD Athlon(tm) XP 2500+ stepping 00 [ 18.386617] Total of 1 processors activated (3673.90 BogoMIPS). [ 18.386726] ENABLING IO-APIC IRQs [ 18.386903] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 18.533153] Brought up 1 CPUs [ 18.533187] CPU0 attaching sched-domain: [ 18.533190] domain 0: span 01 [ 18.533192] groups: 01 [ 18.533434] net_namespace: 64 bytes [ 18.533443] Booting paravirtualized kernel on bare hardware [ 18.533991] Time: 17:26:10 Date: 04/24/08 [ 18.534031] NET: Registered protocol family 16 [ 18.534294] EISA bus registered [ 18.534316] ACPI: bus type pci registered [ 18.570465] PCI: PCI BIOS revision 2.10 entry at 0xfa600, last bus=1 [ 18.570469] PCI: Using configuration type 1 [ 18.570471] Setting up standard PCI resources [ 18.572692] ACPI: EC: Look up EC in DSDT [ 18.575950] ACPI: Interpreter enabled [ 18.575954] ACPI: (supports S0 S3 S4 S5) [ 18.575969] ACPI: Using IOAPIC for interrupt routing [ 18.580897] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.581090] Enabling SiS 96x SMBus. [ 18.581788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.601593] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 18.601689] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 18.601782] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 18.601874] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 18.601965] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 18.602060] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 18.602152] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 18.602247] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 18.602370] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.602405] pnp: PnP ACPI init [ 18.602414] ACPI: bus type pnp registered [ 18.605602] pnp: PnP ACPI: found 14 devices [ 18.605604] ACPI: ACPI bus type pnp unregistered [ 18.605609] PnPBIOS: Disabled by ACPI PNP [ 18.605889] PCI: Using ACPI for IRQ routing [ 18.605893] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.628971] NET: Registered protocol family 8 [ 18.628974] NET: Registered protocol family 20 [ 18.629073] AppArmor: AppArmor Filesystem Enabled [ 18.632954] Time: tsc clocksource has been installed. [ 18.640985] system 00:00: iomem range 0xcf600-0xcffff has been reserved [ 18.640989] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 18.640992] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 18.640995] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 18.640998] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 18.641001] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved [ 18.641004] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 18.641007] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 18.641010] system 00:00: iomem range 0xffee0000-0xffefffff has been reserved [ 18.641014] system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved [ 18.641017] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 18.641020] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved [ 18.641027] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 18.641030] system 00:02: ioport range 0x290-0x29f has been reserved [ 18.641033] system 00:02: ioport range 0x800-0x805 has been reserved [ 18.671473] PCI: Bridge: 0000:00:01.0 [ 18.671476] IO window: disabled. [ 18.671482] MEM window: ec000000-edffffff [ 18.671487] PREFETCH window: e0000000-e7ffffff [ 18.671512] NET: Registered protocol family 2 [ 18.708967] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 18.709416] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 18.711588] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 18.712707] TCP: Hash tables configured (established 131072 bind 65536) [ 18.712710] TCP reno registered [ 18.721038] checking if image is initramfs... it is [ 19.172245] Switched to high resolution mode on CPU 0 [ 19.395255] Freeing initrd memory: 7271k freed [ 19.396141] audit: initializing netlink socket (disabled) [ 19.396161] audit(1209057970.368:1): initialized [ 19.396363] highmem bounce pool size: 64 pages [ 19.398581] VFS: Disk quotas dquot_6.5.1 [ 19.398669] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 19.398838] io scheduler noop registered [ 19.398841] io scheduler anticipatory registered [ 19.398844] io scheduler deadline registered [ 19.398856] io scheduler cfq registered (default) [ 19.398904] Boot video device is 0000:01:00.0 [ 19.399224] isapnp: Scanning for PnP cards... [ 19.752210] isapnp: No Plug & Play device found [ 19.785064] Real Time Clock Driver v1.12ac [ 19.785196] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.785335] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.785475] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 19.786095] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.786333] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 19.787289] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.787714] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 19.787836] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 19.788128] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.788134] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.799392] mice: PS/2 mouse device common for all mice [ 19.799537] EISA: Probing bus 0 at eisa.0 [ 19.799546] Cannot allocate resource for EISA slot 1 [ 19.799574] EISA: Detected 0 cards. [ 19.799579] cpuidle: using governor ladder [ 19.799581] cpuidle: using governor menu [ 19.799750] NET: Registered protocol family 1 [ 19.799783] Using IPI No-Shortcut mode [ 19.799830] registered taskstats version 1 [ 19.799944] Magic number: 4:967:441 [ 19.800202] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 19.800205] EDD information not available. [ 19.800759] Freeing unused kernel memory: 364k freed [ 19.827310] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 21.061724] fuse init (API version 7.9) [ 21.766101] SCSI subsystem initialized [ 21.841797] libata version 3.00 loaded. [ 21.852950] usbcore: registered new interface driver usbfs [ 21.852982] usbcore: registered new interface driver hub [ 21.876512] usbcore: registered new device driver usb [ 21.893646] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 16 [ 21.893662] 3c59x: Donald Becker and others. [ 21.893672] 0000:00:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at f8840000. [ 21.940382] sis900.c: v1.08.10 Apr. 2 2006 [ 21.942287] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16 [ 21.943232] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 21.952719] 0000:00:04.0: Using transceiver found at address 1 as default [ 21.953550] eth1: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 16, 00:0d:61:64:51:80 [ 21.960351] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 21.960419] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17 [ 21.960441] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 21.960810] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 21.960834] ohci_hcd 0000:00:03.0: irq 17, io mem 0xef003000 [ 22.018401] usb usb1: configuration #1 chosen from 1 choice [ 22.018434] hub 1-0:1.0: USB hub found [ 22.018446] hub 1-0:1.0: 3 ports detected [ 22.060655] Floppy drive(s): fd0 is 1.44M [ 22.083834] FDC 0 is a post-1991 82077 [ 22.120243] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18 [ 22.120269] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 22.120306] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 22.120328] ohci_hcd 0000:00:03.1: irq 18, io mem 0xef000000 [ 22.178187] usb usb2: configuration #1 chosen from 1 choice [ 22.178221] hub 2-0:1.0: USB hub found [ 22.178233] hub 2-0:1.0: 3 ports detected [ 22.283784] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19 [ 22.283804] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 22.283904] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3 [ 22.283954] PCI: cache line size of 64 is not supported by device 0000:00:03.3 [ 22.283968] ehci_hcd 0000:00:03.3: irq 19, io mem 0xef001000 [ 22.423670] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 22.435644] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 22.435810] usb usb3: configuration #1 chosen from 1 choice [ 22.435843] hub 3-0:1.0: USB hub found [ 22.435858] hub 3-0:1.0: 6 ports detected [ 22.539853] pata_sis 0000:00:02.5: version 0.5.2 [ 22.541614] scsi0 : pata_sis [ 22.542431] scsi1 : pata_sis [ 22.543072] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 22.543077] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 22.711410] ata1.00: HPA unlocked: 586070255 -> 586072368, native 586072368 [ 22.711421] ata1.00: ATA-7: SAMSUNG HD300LD, WK100-12, max UDMA/100 [ 22.711424] ata1.00: 586072368 sectors, multi 16: LBA48 [ 22.719514] ata1.00: configured for UDMA/100 [ 23.039030] ata2.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33 [ 23.106692] usb 1-2: new low speed USB device using ohci_hcd and address 3 [ 23.210791] ata2.00: configured for UDMA/33 [ 23.210958] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD300LD WK10 PQ: 0 ANSI: 5 [ 23.212508] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.01 PQ: 0 ANSI: 5 [ 23.223693] Driver 'sd' needs updating - please use bus_type methods [ 23.223830] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 23.224468] sd 0:0:0:0: [sda] Write Protect is off [ 23.224471] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.224494] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.224559] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 23.224571] sd 0:0:0:0: [sda] Write Protect is off [ 23.224574] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.224591] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.224595] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods [ 23.237795] sda5 sda6 sda7 > [ 23.267885] sd 0:0:0:0: [sda] Attached SCSI disk [ 23.275546] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.275571] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 23.277382] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 23.277392] Uniform CD-ROM driver Revision: 3.20 [ 23.277466] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 23.318632] usb 1-2: configuration #1 chosen from 1 choice [ 23.351408] usbcore: registered new interface driver hiddev [ 23.351445] usbcore: registered new interface driver usbhid [ 23.351449] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 23.576699] Attempting manual resume [ 23.576705] swsusp: Resume From Partition 8:5 [ 23.576707] PM: Checking swsusp image. [ 23.576928] PM: Resume from disk failed. [ 23.611253] kjournald starting. Commit interval 5 seconds [ 23.611277] EXT3-fs: mounted filesystem with ordered data mode. [ 31.359157] Linux agpgart interface v0.102 [ 31.424256] agpgart: Detected SiS chipset - id:1862 [ 31.429228] agpgart: AGP aperture is 64M @ 0xe8000000 [ 31.483152] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.550881] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.689351] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400 [ 31.923587] input: Power Button (FF) as /devices/virtual/input/input2 [ 31.938319] ACPI: Power Button (FF) [PWRF] [ 31.938473] input: Power Button (CM) as /devices/virtual/input/input3 [ 31.954297] ACPI: Power Button (CM) [PWRB] [ 31.954489] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 31.966255] ACPI: Sleep Button (CM) [FUTS] [ 32.862078] Linux video capture interface: v2.00 [ 33.343132] nvidia: module license 'NVIDIA' taints kernel. [ 34.011737] udev: renamed network interface eth0 to eth1 [ 34.035406] udev: renamed network interface eth1_rename to eth0 [ 34.582631] saa7130/34: v4l2 driver version 0.2.14 loaded [ 34.592111] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 20 [ 34.592124] saa7130[0]: found at 0000:00:0d.0, rev: 1, irq: 20, latency: 32, mmio: 0xef005000 [ 34.592132] saa7130[0]: subsystem: 1461:d109, board: Avermedia AVerTV GO 007 FM [card=57,insmod option] [ 34.592144] saa7130[0]: board init: gpio is 10400 [ 34.592258] input: saa7134 IR (Avermedia AVerTV GO as /devices/pci0000:00/0000:00:0d.0/input/input5 [ 34.738373] saa7130[0]: i2c eeprom 00: 61 14 09 d1 ff ff ff ff ff ff ff ff ff ff ff ff [ 34.738387] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 34.738396] saa7130[0]: i2c eeprom 20: 13 02 ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 34.738404] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 34.738411] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 34.738419] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 34.738427] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 34.738435] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 34.875444] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 35.113888] tuner 1-0061: chip found @ 0xc2 (saa7130[0]) [ 35.113938] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 35.113942] tuner 1-0061: type set to Philips PAL_BG (FI1 [ 35.113947] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 35.113950] tuner 1-0061: type set to Philips PAL_BG (FI1 [ 35.188996] input: Wacom Volito as /devices/pci0000:00/0000:00:03.0/usb1/1-2/1-2:1.0/input/input7 [ 35.191574] saa7130[0]: registered device video0 [v4l2] [ 35.191595] saa7130[0]: registered device vbi0 [ 35.191616] saa7130[0]: registered device radio0 [ 35.191806] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 21 [ 35.210372] usbcore: registered new interface driver wacom [ 35.210381] /build/buildd/linux-2.6.24/drivers/input/tablet/wacom_sys.c: v1.47:USB Wacom Graphire and Wacom Intuos tablet driver [ 35.290031] saa7134 ALSA driver for DMA sound loaded [ 35.290078] saa7130[0]/alsa: saa7130[0] at 0xef005000 irq 20 registered as card 2 [ 35.378880] logips2pp: Detected unknown logitech mouse model 115 [ 35.850329] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input8 [ 35.879836] parport_pc 00:0a: reported by Plug and Play ACPI [ 35.879887] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 36.354592] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 22 [ 36.675759] intel8x0_measure_ac97_clock: measured 54811 usecs [ 36.675766] intel8x0: clocking to 48000 [ 36.676656] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 [ 36.677257] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 38.547097] lp0: using parport0 (interrupt-driven). [ 38.566935] i2c /dev entries driver [ 38.599624] usbcore: registered new interface driver usbserial [ 38.599647] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 38.599669] usbcore: registered new interface driver usbserial_generic [ 38.599673] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 38.604062] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS [ 38.604081] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5 [ 38.604096] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0 [ 38.604121] usbcore: registered new interface driver visor [ 38.604125] /build/buildd/linux-2.6.24/drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver [ 38.684175] Adding 2931820k swap on /dev/sda5. Priority:-1 extents:1 across:2931820k [ 39.290388] EXT3 FS on sda7, internal journal [ 40.500668] kjournald starting. Commit interval 5 seconds [ 40.500907] EXT3 FS on sda6, internal journal [ 40.500914] EXT3-fs: mounted filesystem with ordered data mode. [ 40.516861] kjournald starting. Commit interval 5 seconds [ 40.517020] EXT3 FS on sda1, internal journal [ 40.517024] EXT3-fs: mounted filesystem with ordered data mode. [ 41.249894] ip_tables: (C) 2000-2006 Netfilter Core Team [ 41.711196] No dock devices found. [ 43.838395] ppdev: user-space parallel port driver [ 44.147178] audit(1209057995.710:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4925 profile="/usr/sbin/cupsd" namespace="default" [ 45.914233] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 45.914242] apm: overridden by ACPI. [ 46.524183] NET: Registered protocol family 10 [ 46.524464] lo: Disabled Privacy Extensions [ 48.222037] eth1: setting half-duplex. [ 48.223259] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 50.237573] eth0: Media Link On 100mbps full-duplex [ 51.218029] Bluetooth: Core ver 2.11 [ 51.219410] NET: Registered protocol family 31 [ 51.219417] Bluetooth: HCI device and connection manager initialized [ 51.219423] Bluetooth: HCI socket layer initialized [ 51.278434] Bluetooth: L2CAP ver 2.9 [ 51.278442] Bluetooth: L2CAP socket layer initialized [ 51.349213] Bluetooth: RFCOMM socket layer initialized [ 51.349247] Bluetooth: RFCOMM TTY layer initialized [ 51.349250] Bluetooth: RFCOMM ver 1.8 [ 51.763240] NET: Registered protocol family 17 [ 53.444696] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 53.444717] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 53.444722] agpgart: SiS delay workaround: giving bridge time to recover. [ 53.460221] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 65.751449] eth0: no IPv6 routers present [ 114.536280] saa7134 ALSA driver for DMA sound unloaded [ 138.722470] Linux video capture interface: v2.00 [ 138.799934] saa7130/34: v4l2 driver version 0.2.14 loaded [ 138.800646] saa7130[0]: found at 0000:00:0d.0, rev: 1, irq: 20, latency: 32, mmio: 0xef005000 [ 138.800656] saa7130[0]: subsystem: 1461:d109, board: Avermedia AVerTV GO 007 FM [card=57,insmod option] [ 138.800668] saa7130[0]: board init: gpio is 10405 [ 138.802676] input: saa7134 IR (Avermedia AVerTV GO as /devices/pci0000:00/0000:00:0d.0/input/input9 [ 138.949777] tuner 1-0061: chip found @ 0xc2 (saa7130[0]) [ 138.949834] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 138.949839] tuner 1-0061: type set to Philips PAL_BG (FI1 [ 138.949844] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 138.949847] tuner 1-0061: type set to Philips PAL_BG (FI1 [ 138.981724] saa7130[0]: i2c eeprom 00: 61 14 09 d1 ff ff ff ff ff ff ff ff ff ff ff ff [ 138.981738] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 138.981745] saa7130[0]: i2c eeprom 20: 13 02 ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 138.981752] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 138.981759] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 138.981766] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 138.981773] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 138.981780] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 139.011529] saa7130[0]: registered device video0 [v4l2] [ 139.012181] saa7130[0]: registered device vbi0 [ 139.012604] saa7130[0]: registered device radio0 [ 139.061707] saa7134 ALSA driver for DMA sound loaded [ 139.062356] saa7130[0]/alsa: saa7130[0] at 0xef005000 irq 20 registered as card 2
-- No sound for TV with Avermedia AVerTV GO 007 FM on hardy https://bugs.launchpad.net/bugs/209247 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
