[ 12.829854] MEM window: efc00000-efcfffff [ 12.829858] PREFETCH window: disabled. [ 12.829863] PCI: Bridge: 0000:00:1e.0 [ 12.829866] IO window: c000-cfff [ 12.829871] MEM window: efb00000-efbfffff [ 12.829875] PREFETCH window: disabled. [ 12.829894] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.829900] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 12.829919] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.829924] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.829936] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 12.829947] NET: Registered protocol family 2 [ 12.867122] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 12.867422] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 12.867997] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 12.868286] TCP: Hash tables configured (established 131072 bind 65536) [ 12.868289] TCP reno registered [ 12.879201] checking if image is initramfs... it is [ 13.495106] Freeing initrd memory: 7704k freed [ 13.495263] Simple Boot Flag at 0x7a set to 0x1 [ 13.495777] audit: initializing netlink socket (disabled) [ 13.495791] audit(1211571081.020:1): initialized [ 13.496003] highmem bounce pool size: 64 pages [ 13.498412] VFS: Disk quotas dquot_6.5.1 [ 13.498501] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 13.498656] io scheduler noop registered [ 13.498658] io scheduler anticipatory registered [ 13.498660] io scheduler deadline registered [ 13.498672] io scheduler cfq registered (default) [ 13.498770] Boot video device is 0000:01:00.0 [ 13.498778] PCI: Firmware left 0000:03:08.0 e100 interrupts enabled, disabling [ 13.498918] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 13.498960] assign_interrupt_mode Found MSI capability [ 13.498997] Allocate Port Service[0000:00:01.0:pcie00] [ 13.499091] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.499137] assign_interrupt_mode Found MSI capability [ 13.499174] Allocate Port Service[0000:00:1c.0:pcie00] [ 13.499217] Allocate Port Service[0000:00:1c.0:pcie02] [ 13.499539] isapnp: Scanning for PnP cards... [ 13.851325] isapnp: No Plug & Play device found [ 13.888639] Real Time Clock Driver v1.12ac [ 13.888750] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 13.890173] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 13.890254] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 13.890437] PNP: No PS/2 controller found. Probing ports directly. [ 13.892997] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 13.893004] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 13.910634] mice: PS/2 mouse device common for all mice [ 13.910786] EISA: Probing bus 0 at eisa.0 [ 13.910790] EISA: Cannot allocate resource for mainboard [ 13.910797] Cannot allocate resource for EISA slot 2 [ 13.910820] EISA: Detected 0 cards. [ 13.910823] cpuidle: using governor ladder [ 13.910826] cpuidle: using governor menu [ 13.910909] NET: Registered protocol family 1 [ 13.910940] Using IPI No-Shortcut mode [ 13.910970] registered taskstats version 1 [ 13.911074] Magic number: 8:216:547 [ 13.911180] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 13.911183] EDD information not available. [ 13.911391] Freeing unused kernel memory: 364k freed [ 15.149285] fuse init (API version 7.9) [ 15.218919] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 15.218934] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 15.390976] usbcore: registered new interface driver usbfs [ 15.391010] usbcore: registered new interface driver hub [ 15.398762] usbcore: registered new device driver usb [ 15.401765] USB Universal Host Controller Interface driver v3.0 [ 15.401835] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 17 [ 15.401856] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 15.401862] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 15.402118] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 15.402155] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80 [ 15.402361] usb usb1: configuration #1 chosen from 1 choice [ 15.402403] hub 1-0:1.0: USB hub found [ 15.402413] hub 1-0:1.0: 2 ports detected [ 15.506808] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 18 [ 15.506831] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 15.506837] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 15.506874] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 15.506914] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60 [ 15.507105] usb usb2: configuration #1 chosen from 1 choice [ 15.507148] hub 2-0:1.0: USB hub found [ 15.507159] hub 2-0:1.0: 2 ports detected [ 15.610742] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 15.610762] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 15.610768] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 15.610810] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 15.610843] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000ff40 [ 15.611014] usb usb3: configuration #1 chosen from 1 choice [ 15.611054] hub 3-0:1.0: USB hub found [ 15.611063] hub 3-0:1.0: 2 ports detected [ 15.714717] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 20 [ 15.714735] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 15.714742] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 15.714779] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 15.714812] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000ff20 [ 15.714983] usb usb4: configuration #1 chosen from 1 choice [ 15.715022] hub 4-0:1.0: USB hub found [ 15.715032] hub 4-0:1.0: 2 ports detected [ 15.746548] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 15.770871] SCSI subsystem initialized [ 15.799102] libata version 3.00 loaded. [ 15.818674] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.818729] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 15.818751] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 15.818787] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 21 [ 15.818821] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 15.818838] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 15.818882] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 17 [ 15.818899] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 15.818904] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 15.818941] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 15.822846] ehci_hcd 0000:00:1d.7: debug port 1 [ 15.822854] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 15.822864] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xffa80800 [ 15.874474] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 15.874645] usb usb5: configuration #1 chosen from 1 choice [ 15.874686] hub 5-0:1.0: USB hub found [ 15.874696] hub 5-0:1.0: 8 ports detected [ 15.880282] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 15.880288] e100: Copyright(c) 1999-2006 Intel Corporation [ 15.978577] ata_piix 0000:00:1f.1: version 2.12 [ 15.978601] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.978654] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 15.980615] scsi0 : ata_piix [ 15.981393] scsi1 : ata_piix [ 15.981472] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 15.981475] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 16.277294] usb 1-1: device not accepting address 2, error -71 [ 16.301664] ata1.00: ATAPI: _NEC DVD+/-RW ND-3530A, 102B, max UDMA/33 [ 16.473472] ata1.00: configured for UDMA/33 [ 16.473526] ata2: port disabled. ignoring. [ 16.474627] scsi 0:0:0:0: CD-ROM _NEC DVD+-RW ND-3530A 102B PQ: 0 ANSI: 5 [ 16.474723] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 16.629074] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 21 [ 16.629115] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 16.629165] scsi2 : ata_piix [ 16.629349] scsi3 : ata_piix [ 16.629391] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 21 [ 16.629395] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 21 [ 16.806138] ata3.00: ATA-8: WDC WD3200AAKS-00YGA0, 12.01C02, max UDMA/133 [ 16.806144] ata3.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 16.821734] ata3.00: configured for UDMA/133 [ 17.396650] usb 5-2: new high speed USB device using ehci_hcd and address 3 [ 17.532589] usb 5-2: configuration #1 chosen from 1 choice [ 17.649676] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 [ 17.650110] ACPI: PCI Interrupt 0000:03:02.2[B] -> GSI 19 (level, low) -> IRQ 22 [ 17.699853] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[efbea800-efbeafff] Max Packet=[2048] IR/IT contexts=[4/8] [ 17.704426] ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 17.724584] e100: eth0: e100_probe: addr 0xefbeb000, irq 21, MAC addr 00:12:3f:95:90:48 [ 17.737252] Driver 'sd' needs updating - please use bus_type methods [ 17.737376] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 17.737400] sd 2:0:0:0: [sda] Write Protect is off [ 17.737406] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.737443] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.737517] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 17.737534] sd 2:0:0:0: [sda] Write Protect is off [ 17.737537] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.737566] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.737571] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods [ 17.744418] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 17.744423] Uniform CD-ROM driver Revision: 3.20 [ 17.744496] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 17.757532] sda5 > [ 17.757651] sd 2:0:0:0: [sda] Attached SCSI disk [ 17.765759] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 17.765797] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 17.812440] usb 5-3: new high speed USB device using ehci_hcd and address 4 [ 17.947116] usb 5-3: configuration #1 chosen from 1 choice [ 17.987179] Attempting manual resume [ 17.987184] swsusp: Resume From Partition 8:5 [ 17.987186] PM: Checking swsusp image. [ 17.987360] PM: Resume from disk failed. [ 18.030888] kjournald starting. Commit interval 5 seconds [ 18.030897] EXT3-fs: mounted filesystem with ordered data mode. [ 18.608101] usbcore: registered new interface driver libusual [ 18.755017] Initializing USB Mass Storage driver... [ 18.847872] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 18.971935] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0191076c42] [ 19.021938] usb 2-2: configuration #1 chosen from 1 choice [ 19.279651] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 19.451856] usb 3-1: configuration #1 chosen from 1 choice [ 19.691416] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 19.853642] usb 3-2: configuration #1 chosen from 1 choice [ 19.865673] scsi4 : SCSI emulation for USB Mass Storage devices [ 19.865735] usb-storage: device found at 4 [ 19.865739] usb-storage: waiting for device to settle before scanning [ 19.865766] usbcore: registered new interface driver usb-storage [ 19.865770] USB Mass Storage support registered. [ 20.103195] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 20.278589] usb 1-1: configuration #1 chosen from 1 choice [ 23.674153] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 23.710373] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.778113] Linux agpgart interface v0.102 [ 23.830225] iTCO_vendor_support: vendor-support=0 [ 23.862247] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 23.862778] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 23.862849] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 23.961931] intel_rng: Firmware space is locked read-only. If you can't or [ 23.961935] intel_rng: don't want to disable this in firmware setup, and if [ 23.961937] intel_rng: you are certain that your system has a functional [ 23.961939] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 24.355638] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 24.625000] input: Power Button (FF) as /devices/virtual/input/input2 [ 24.652759] ACPI: Power Button (FF) [PWRF] [ 24.652874] input: Power Button (CM) as /devices/virtual/input/input3 [ 24.680741] ACPI: Power Button (CM) [VBTN] [ 24.861539] usb-storage: device scan complete [ 24.863449] scsi 4:0:0:0: Direct-Access Samsung CF Card CF 1.6E PQ: 0 ANSI: 0 CCS [ 24.865315] scsi 4:0:0:1: Direct-Access Samsung MS Card MS 1.6E PQ: 0 ANSI: 0 CCS [ 24.867189] scsi 4:0:0:2: Direct-Access Samsung SD Card MMC/SD 1.6E PQ: 0 ANSI: 0 CCS [ 24.868937] scsi 4:0:0:3: Direct-Access Samsung SM/XD Card SM 1.6E PQ: 0 ANSI: 0 CCS [ 24.870498] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 24.870567] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 24.871723] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 24.871788] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 24.872978] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 24.873041] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 24.874217] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 24.874277] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 24.974715] usbcore: registered new interface driver hiddev [ 25.005000] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input4 [ 25.020627] input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2 [ 25.038184] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input5 [ 25.064643] input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1 [ 25.064669] usbcore: registered new interface driver usbhid [ 25.064675] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 25.277142] gameport: EMU10K1 is pci0000:03:02.1/gameport0, io 0xcc70, speed 451kHz [ 25.827449] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 25.841195] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1091 [ 25.841231] usbcore: registered new interface driver usblp [ 25.994114] [fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes. [ 25.994172] [fglrx] ASYNCIO init succeed! [ 25.995489] [fglrx] PAT is enabled successfully! [ 26.008036] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 26.065318] input: Yealink usb-p1k as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.3/input/input6 [ 26.140128] usbcore: registered new interface driver yealink [ 26.140137] /build/buildd/linux-2.6.24/drivers/input/misc/yealink.c: Yealink phone driver:yld-20051230 [ 26.583348] usbcore: registered new interface driver snd-usb-audio [ 26.881339] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 26.885872] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c:1544: Installing spdif_bug patch: Audigy 2 [SB0350b] [ 26.993655] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 28.557796] lp: driver loaded but no devices found [ 28.717520] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k [ 29.276247] EXT3 FS on sda1, internal journal [ 30.413139] ip_tables: (C) 2000-2006 Netfilter Core Team [ 30.900032] No dock devices found. [ 31.977930] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 31.977938] apm: disabled - APM is not SMP safe. [ 32.191572] ppdev: user-space parallel port driver [ 32.317496] audit(1211571099.849:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5086 profile="/usr/sbin/cupsd" namespace="default" [ 33.553068] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 33.643767] Bluetooth: Core ver 2.11 [ 33.645521] NET: Registered protocol family 31 [ 33.645528] Bluetooth: HCI device and connection manager initialized [ 33.645534] Bluetooth: HCI socket layer initialized [ 33.694862] Bluetooth: L2CAP ver 2.9 [ 33.694869] Bluetooth: L2CAP socket layer initialized [ 33.767698] Bluetooth: RFCOMM socket layer initialized [ 33.767717] Bluetooth: RFCOMM TTY layer initialized [ 33.767720] Bluetooth: RFCOMM ver 1.8 [ 36.063769] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 36.772990] NET: Registered protocol family 17 [ 38.159769] NET: Registered protocol family 10 [ 38.160158] lo: Disabled Privacy Extensions [ 39.284068] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000 [ 39.284076] [fglrx] Reserve Block - 1 offset = 0X7fff000 length = 0X1000 [ 39.284084] [fglrx] Reserve Block - 2 offset = 0X7fbf000 length = 0X40000 [ 39.430421] [fglrx] interrupt source 20008000 successfully enabled [ 39.430428] [fglrx] enable ID = 0x00000004 [ 39.430440] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 39.430541] [fglrx] interrupt source 10000000 successfully enabled [ 39.430546] [fglrx] enable ID = 0x00000005 [ 39.430552] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 48.479942] eth0: no IPv6 routers present [ 281.689334] [fglrx] interrupt source 10000000 successfully disabled! [ 281.689340] [fglrx] enable ID = 0x00000000 [ 281.689346] [fglrx] Receive disable interrupt message with irqEnableMask: 10000000; dwIRQEnableId: 00000005 [ 281.689366] [fglrx] interrupt source 20008000 successfully disabled! [ 281.689371] [fglrx] enable ID = 0x00000000 [ 281.689375] [fglrx] Receive disable interrupt message with irqEnableMask: 20008000; dwIRQEnableId: 00000004 [ 286.683275] [fglrx] PCIe has already been initialized. Reinitializing ... [ 286.703052] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000 [ 286.703059] [fglrx] Reserve Block - 1 offset = 0X7fff000 length = 0X1000 [ 286.703065] [fglrx] Reserve Block - 2 offset = 0X7fbf000 length = 0X40000 [ 286.828600] [fglrx] interrupt source 20008000 successfully enabled [ 286.828609] [fglrx] enable ID = 0x00000004 [ 286.829409] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 286.829755] [fglrx] interrupt source 10000000 successfully enabled [ 286.829760] [fglrx] enable ID = 0x00000005 [ 286.829767] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 307.960485] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 308.132563] usb 4-1: configuration #1 chosen from 1 choice [ 308.135562] scsi5 : SCSI emulation for USB Mass Storage devices [ 308.135771] usb-storage: device found at 2 [ 308.135774] usb-storage: waiting for device to settle before scanning [ 309.875478] usb 4-1: USB disconnect, address 2 [ 469.302778] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 469.472841] usb 4-1: configuration #1 chosen from 1 choice [ 469.478381] scsi6 : SCSI emulation for USB Mass Storage devices [ 469.479058] usb-storage: device found at 3 [ 469.479062] usb-storage: waiting for device to settle before scanning [ 471.153826] usb 4-1: USB disconnect, address 3 [ 617.122333] usb 4-2: new full speed USB device using uhci_hcd and address 4 [ 619.652979] usb 4-2: new full speed USB device using uhci_hcd and address 5 [ 619.821008] usb 4-2: configuration #1 chosen from 1 choice [ 619.826410] scsi7 : SCSI emulation for USB Mass Storage devices [ 619.827081] usb-storage: device found at 5 [ 619.827084] usb-storage: waiting for device to settle before scanning [ 624.826146] usb-storage: device scan complete [ 624.833146] scsi 7:0:0:0: Direct-Access FUJIFILM USB-DRIVEUNIT 1.00 PQ: 0 ANSI: 0 CCS [ 624.867101] sd 7:0:0:0: [sdf] 512000 512-byte hardware sectors (262 MB) [ 624.879088] sd 7:0:0:0: [sdf] Write Protect is off [ 624.879100] sd 7:0:0:0: [sdf] Mode Sense: 0b 00 00 08 [ 624.879106] sd 7:0:0:0: [sdf] Assuming drive cache: write through [ 624.911071] sd 7:0:0:0: [sdf] 512000 512-byte hardware sectors (262 MB) [ 624.919546] sd 7:0:0:0: [sdf] Write Protect is off [ 624.919556] sd 7:0:0:0: [sdf] Mode Sense: 0b 00 00 08 [ 624.919560] sd 7:0:0:0: [sdf] Assuming drive cache: write through [ 624.919569] sdf: sdf1 [ 624.939335] sd 7:0:0:0: [sdf] Attached SCSI removable disk [ 624.939409] sd 7:0:0:0: Attached scsi generic sg6 type 0 [ 633.894290] usb 4-2: USB disconnect, address 5 [ 633.940875] scsi 7:0:0:0: rejecting I/O to dead device [ 640.769627] usb 4-2: new full speed USB device using uhci_hcd and address 6 [ 649.916710] usb 4-2: new full speed USB device using uhci_hcd and address 7 [ 650.083783] usb 4-2: configuration #1 chosen from 1 choice [ 650.086787] scsi8 : SCSI emulation for USB Mass Storage devices [ 650.087217] usb-storage: device found at 7 [ 650.087222] usb-storage: waiting for device to settle before scanning [ 653.125984] usb 4-2: USB disconnect, address 7 [ 654.138441] usb 4-2: new full speed USB device using uhci_hcd and address 8 [ 654.306517] usb 4-2: configuration #1 chosen from 1 choice [ 654.318224] scsi9 : SCSI emulation for USB Mass Storage devices [ 654.318822] usb-storage: device found at 8 [ 654.318827] usb-storage: waiting for device to settle before scanning [ 659.318569] usb-storage: device scan complete [ 659.325564] scsi 9:0:0:0: Direct-Access FUJIFILM USB-DRIVEUNIT 1.00 PQ: 0 ANSI: 0 CCS [ 659.337545] sd 9:0:0:0: [sdf] 512000 512-byte hardware sectors (262 MB) [ 659.345538] sd 9:0:0:0: [sdf] Write Protect is off [ 659.345547] sd 9:0:0:0: [sdf] Mode Sense: 0b 00 00 08 [ 659.345553] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 659.364523] sd 9:0:0:0: [sdf] 512000 512-byte hardware sectors (262 MB) [ 659.371517] sd 9:0:0:0: [sdf] Write Protect is off [ 659.371523] sd 9:0:0:0: [sdf] Mode Sense: 0b 00 00 08 [ 659.371528] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 659.371534] sdf: sdf1 [ 659.395909] sd 9:0:0:0: [sdf] Attached SCSI removable disk [ 659.395983] sd 9:0:0:0: Attached scsi generic sg6 type 0 [ 716.849751] usb 4-2: USB disconnect, address 8 [ 716.872775] scsi 9:0:0:0: rejecting I/O to dead device [ 2491.446980] usb 4-1: new full speed USB device using uhci_hcd and address 9 [ 2491.574910] usb 4-1: device descriptor read/64, error -71 [ 2492.534400] usb 4-1: new full speed USB device using uhci_hcd and address 10 [ 2492.706450] usb 4-1: configuration #1 chosen from 1 choice [ 2492.717123] scsi10 : SCSI emulation for USB Mass Storage devices [ 2492.717445] usb-storage: device found at 10 [ 2492.717449] usb-storage: waiting for device to settle before scanning [ 2495.664731] usb 4-1: USB disconnect, address 10 [ 2512.978348] usb 5-2: USB disconnect, address 3 [ 3768.492059] /build/buildd/linux-2.6.24/drivers/input/misc/yealink.c: urb_irq_callback - urb status -84 [ 3768.494057] /build/buildd/linux-2.6.24/drivers/input/misc/yealink.c: urb_ctl_callback - urb status -71 [ 3768.540032] /build/buildd/linux-2.6.24/drivers/input/misc/yealink.c: urb_irq_callback - urb status -84 [ 3768.542031] /build/buildd/linux-2.6.24/drivers/input/misc/yealink.c: urb_ctl_callback - urb status -71 [ 3768.560637] usb 3-2: USB disconnect, address 3 [ 3768.562018] /build/buildd/linux-2.6.24/drivers/input/misc/yealink.c: urb_irq_callback - urb status -108 [ 3768.562025] /build/buildd/linux-2.6.24/drivers/input/misc/yealink.c: urb_irq_callback - usb_submit_urb failed -19 [ 3771.039306] usb 1-1: USB disconnect, address 4 [ 3772.527513] usb 3-1: USB disconnect, address 2 [ 3772.527858] usblp0: removed [ 3777.483831] usb 2-2: USB disconnect, address 2 [ 3792.439768] usb 1-2: new low speed USB device using uhci_hcd and address 5 [ 3792.614824] usb 1-2: configuration #1 chosen from 1 choice [ 3792.631008] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input7 [ 3792.672715] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2 [ 3822.599714] usb 1-1: new low speed USB device using uhci_hcd and address 6 [ 3822.773181] usb 1-1: configuration #1 chosen from 1 choice [ 3822.799461] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input8 [ 3822.847499] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1 [ 4043.460865] usb 3-1: new full speed USB device using uhci_hcd and address 4 [ 4043.632918] usb 3-1: configuration #1 chosen from 1 choice [ 4043.663135] scsi11 : SCSI emulation for USB Mass Storage devices [ 4043.664732] usb-storage: device found at 4 [ 4043.664747] usb-storage: waiting for device to settle before scanning [ 4044.688239] usb 3-1: USB disconnect, address 4 [ 4055.634316] usb 3-1: new full speed USB device using uhci_hcd and address 5 [ 4055.816372] usb 3-1: configuration #1 chosen from 1 choice [ 4055.821843] scsi12 : SCSI emulation for USB Mass Storage devices [ 4055.822503] usb-storage: device found at 5 [ 4055.822507] usb-storage: waiting for device to settle before scanning [ 4056.086107] usb 3-1: USB disconnect, address 5 [ 4398.685944] usb 5-7: new high speed USB device using ehci_hcd and address 30 [ 4398.820733] usb 5-7: configuration #1 chosen from 1 choice [ 4398.825896] scsi13 : SCSI emulation for USB Mass Storage devices [ 4398.826582] usb-storage: device found at 30 [ 4398.826586] usb-storage: waiting for device to settle before scanning [ 4403.823361] usb-storage: device scan complete [ 4403.823975] scsi 13:0:0:0: Direct-Access DW PND1GSKS10103D 1.00 PQ: 0 ANSI: 2 [ 4403.825727] sd 13:0:0:0: [sdf] 2039040 512-byte hardware sectors (1044 MB) [ 4403.826338] sd 13:0:0:0: [sdf] Write Protect is off [ 4403.826345] sd 13:0:0:0: [sdf] Mode Sense: 03 00 00 00 [ 4403.826349] sd 13:0:0:0: [sdf] Assuming drive cache: write through [ 4403.828957] sd 13:0:0:0: [sdf] 2039040 512-byte hardware sectors (1044 MB) [ 4403.829583] sd 13:0:0:0: [sdf] Write Protect is off [ 4403.829589] sd 13:0:0:0: [sdf] Mode Sense: 03 00 00 00 [ 4403.829592] sd 13:0:0:0: [sdf] Assuming drive cache: write through [ 4403.829598] sdf: sdf1 [ 4403.830437] sd 13:0:0:0: [sdf] Attached SCSI removable disk [ 4403.830507] sd 13:0:0:0: Attached scsi generic sg6 type 0 [ 4425.477157] usb 5-7: USB disconnect, address 30 [ 5595.830542] usb 3-1: new full speed USB device using uhci_hcd and address 6 [ 5595.954483] usb 3-1: device descriptor read/64, error -71 [ 5596.182362] usb 3-1: device descriptor read/64, error -71 [ 5596.398243] usb 3-1: new full speed USB device using uhci_hcd and address 7 [ 5596.522178] usb 3-1: device descriptor read/64, error -71 [ 5596.750046] usb 3-1: device descriptor read/64, error -71 [ 5596.965937] usb 3-1: new full speed USB device using uhci_hcd and address 8 [ 5597.381711] usb 3-1: device not accepting address 8, error -71 [ 5597.493650] usb 3-1: new full speed USB device using uhci_hcd and address 9 [ 5597.909422] usb 3-1: device not accepting address 9, error -71
Im having the same issue but with 2 different digital camera -- usb connect problems https://bugs.launchpad.net/bugs/231049 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
