I am experiencing the same problems in an up-to-date edgy. Has the fix been released because the problem still exists on my machine? My wifi card worked well with the hostap drivers in dapper. My card details are similar to Pascal's above:
dmesg output: orinoco 0.15rc3 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL PROTECTED]>, et al) [17179599.552000] orinoco_cs 0.15rc3 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL PROTECTED]>, et al) [17179599.792000] eth1: Hardware identity 800c:0000:0001:0000 [17179599.792000] eth1: Station identity 001f:0004:0001:0005 [17179599.792000] eth1: Firmware determined as Intersil 1.5.4 [17179599.792000] eth1: Ad-hoc demo mode supported [17179599.792000] eth1: IEEE standard IBSS ad-hoc mode supported [17179599.792000] eth1: WEP supported, 104-bit key [17179599.792000] eth1: MAC address XX:XX:XX:XX:XX:XX [17179599.792000] eth1: Station name "Prism I" [17179599.792000] eth1: ready [17179599.792000] eth1: index 0x01: , irq 3, io 0x2080-0x20bf sudo pccardctl ident output: Socket 0: product info: "Wireless LAN", "11Mbps PC Card", "Version 01.02", "" manfid: 0x0156, 0x0002 function: 6 (network) I tried adding the card to /etc/pcmcia/hostap_cs.conf after blacklisting the orinoco_cs module like this: card "Generic 11Mbps WLAN PC Card" version "Wireless LAN", "11Mbps PC Card", "Version 01.02" manfid 0x0156, 0x0002 bind "hostap_cs" but it doesn't seem to work (because of new pcmcia system??). I also tried to compile the hostap drivers from the hostap-source package but it would not compile (maybe I should raise another ticket for this?) -- [Edgy regression] Hostap driver for PRISM2 wifi card not working any more https://launchpad.net/bugs/62685 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
