Using 2.6.24-18... Freeze again, but this time I managed to copy/paste what should go into /var/log/syslog into a webmail before the complete freeze.
Jun 6 12:58:24 my kernel: [15886.070164] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Jun 6 12:58:24 my kernel: [15886.070181] ata1.00: cmd ca/00:08:80:d4:03/00:00:00:00:00/e7 tag 0 dma 4096 out Jun 6 12:58:24 my kernel: [15886.070183] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Jun 6 12:58:24 my kernel: [15886.070188] ata1.00: status: { DRDY } Jun 6 12:58:29 my kernel: [15891.103152] ata1: port is slow to respond, please be patient (Status 0xd0) Jun 6 12:58:34 my kernel: [15896.079265] ata1: device not ready (errno=-16), forcing hardreset Jun 6 12:58:34 my kernel: [15896.079275] ata1: soft resetting link Jun 6 12:59:04 my kernel: [15926.243460] ata1.00: qc timeout (cmd 0xec) Jun 6 12:59:04 my kernel: [15926.243476] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jun 6 12:59:04 my kernel: [15926.243481] ata1.00: revalidation failed (errno=-5) Jun 6 12:59:04 my kernel: [15926.243488] ata1: failed to recover some devices, retrying in 5 secs Jun 6 12:59:14 my kernel: [15936.270551] ata1: port is slow to respond, please be patient (Status 0xd0) Jun 6 12:59:19 my kernel: [15941.250652] ata1: device not ready (errno=-16), forcing hardreset Jun 6 12:59:19 my kernel: [15941.250662] ata1: soft resetting link Jun 6 12:59:49 my kernel: [15971.514689] ata1.00: qc timeout (cmd 0xec) Jun 6 12:59:49 my kernel: [15971.514702] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jun 6 12:59:49 my kernel: [15971.514706] ata1.00: revalidation failed (errno=-5) Jun 6 12:59:49 my kernel: [15971.514712] ata1: failed to recover some devices, retrying in 5 secs Jun 6 12:59:59 my kernel: [15981.542773] ata1: port is slow to respond, please be patient (Status 0xd0) Jun 6 13:00:04 my kernel: [15986.518887] ata1: device not ready (errno=-16), forcing hardreset Jun 6 13:00:04 my kernel: [15986.518896] ata1: soft resetting link Jun 6 13:00:35 my kernel: [16016.782922] ata1.00: qc timeout (cmd 0xec) Jun 6 13:00:35 my kernel: [16016.782937] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jun 6 13:00:35 my kernel: [16016.782942] ata1.00: revalidation failed (errno=-5) Jun 6 13:00:35 my kernel: [16016.782948] ata1.00: disabled Jun 6 13:00:40 my kernel: [16022.319122] ata1: port is slow to respond, please be patient (Status 0xd0) Jun 6 13:00:45 my kernel: [16027.294883] ata1: device not ready (errno=-16), forcing hardreset Jun 6 13:00:45 my kernel: [16027.294894] ata1: soft resetting link Jun 6 13:00:45 my kernel: [16027.550889] ata1: EH complete Jun 6 13:00:45 my kernel: [16027.550919] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK Jun 6 13:00:45 my kernel: [16027.550926] end_request: I/O error, dev sda, sector 117691520 Jun 6 13:00:45 my kernel: [16027.550933] Buffer I/O error on device sda11, logical block 379444 Jun 6 13:00:45 my kernel: [16027.550938] lost page write due to I/O error on sda11 -- system locking up (forcing a hard reboot) https://bugs.launchpad.net/bugs/89362 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs