[EMAIL PROTECTED]:~# lspci 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 430 (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [EMAIL PROTECTED]:~# lsmod Module Size Used by ppp_deflate 7936 0 zlib_deflate 22296 1 ppp_deflate bsd_comp 7552 0 ppp_async 14464 1 crc_ccitt 3456 1 ppp_async ppp_generic 32672 7 ppp_deflate,bsd_comp,ppp_async slhc 8320 1 ppp_generic ipv6 307072 12 binfmt_misc 14604 1 rfcomm 45352 0 l2cap 28160 5 rfcomm bluetooth 62340 4 rfcomm,l2cap ppdev 11272 0 powernow_k8 16480 1 cpufreq_powersave 3072 0 cpufreq_userspace 6176 0 cpufreq_stats 8416 0 cpufreq_conservative 9736 0 cpufreq_ondemand 10640 1 freq_table 6336 3 powernow_k8,cpufreq_stats,cpufreq_ondemand dev_acpi 17028 0 tc1100_wmi 9224 0 sony_acpi 7064 0 pcc_acpi 15616 0 video 19080 0 dock 11992 0 battery 12040 0 asus_acpi 19756 0 container 6144 0 button 10016 0 backlight 8448 1 asus_acpi ac 6920 0 sbs 17856 0 i2c_ec 6784 1 sbs nls_iso8859_1 6528 3 nls_cp437 8192 3 vfat 16256 3 fat 58672 1 vfat lp 15048 0 fuse 51888 0 snd_hda_intel 24224 1 snd_hda_codec 262912 1 snd_hda_intel snd_pcm_oss 49536 0 snd_mixer_oss 19840 1 snd_pcm_oss snd_pcm 92808 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_dummy 5380 0 snd_seq_oss 36608 0 snd_seq_midi 11008 0 snd_rawmidi 29696 1 snd_seq_midi snd_seq_midi_event 9856 2 snd_seq_oss,snd_seq_midi cdc_acm 17952 3 parport_pc 40104 1 snd_seq 61856 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 26632 2 snd_pcm,snd_seq snd_seq_device 10260 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 68904 12 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device parport 43404 3 ppdev,lp,parport_pc psmouse 43536 0 serio_raw 9092 0 k8temp 7552 0 pcspkr 4736 0 soundcore 10272 1 snd shpchp 37404 0 pci_hotplug 36228 1 shpchp i2c_core 26624 1 i2c_ec snd_page_alloc 11792 2 snd_hda_intel,snd_pcm af_packet 27020 4 tsdev 10112 0 evdev 13056 3 ext3 143760 1 jbd 68208 1 ext3 mbcache 11400 1 ext3 ide_cd 35104 0 cdrom 40744 1 ide_cd ide_disk 18304 6 generic 6532 0 [permanent] amd74xx 16944 0 [permanent] sata_nv 24196 0 floppy 67944 0 forcedeth 48776 0 ata_generic 10628 0 libata 137000 2 sata_nv,ata_generic scsi_mod 166968 1 libata ehci_hcd 37004 0 ohci_hcd 24196 0 usbcore 154416 4 cdc_acm,ehci_hcd,ohci_hcd thermal 16912 0 processor 34952 2 powernow_k8,thermal fan 6536 0 fbcon 44416 0 tileblit 4096 1 fbcon font 9856 1 fbcon bitblit 7296 1 fbcon softcursor 3712 1 bitblit vesafb 10376 0 cfbcopyarea 5120 1 vesafb cfbimgblt 4096 1 vesafb cfbfillrect 5632 1 vesafb capability 7048 0 commoncap 9472 1 capability [EMAIL PROTECTED]:~# dmesg [ 0.000000] Linux version 2.6.20-15-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] Command line: root=UUID=f9e68f04-d716-42ee-914e-d3341f8b3184 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfc0000 (usable) [ 0.000000] BIOS-e820: 000000001bfc0000 - 000000001bfce000 (ACPI data) [ 0.000000] BIOS-e820: 000000001bfce000 - 000000001bff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001bff0000 - 000000001c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 114624) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fb9f0 [ 0.000000] ACPI: RSDT (v001 A_M_I_ OEMRSDT 0x11000624 MSFT 0x00000097) @ 0x000000001bfc0000 [ 0.000000] ACPI: FADT (v002 A_M_I_ OEMFACP 0x11000624 MSFT 0x00000097) @ 0x000000001bfc0200 [ 0.000000] ACPI: MADT (v001 A_M_I_ OEMAPIC 0x11000624 MSFT 0x00000097) @ 0x000000001bfc0390 [ 0.000000] ACPI: MCFG (v001 A_M_I_ OEMMCFG 0x11000624 MSFT 0x00000097) @ 0x000000001bfc0400 [ 0.000000] ACPI: OEMB (v001 A_M_I_ AMI_OEM 0x11000624 MSFT 0x00000097) @ 0x000000001bfce040 [ 0.000000] ACPI: HPET (v001 A_M_I_ OEMHPET0 0x11000624 MSFT 0x00000097) @ 0x000000001bfc53f0 [ 0.000000] ACPI: SSDT (v001 A_M_I_ POWERNOW 0x00000001 AMD 0x00000001) @ 0x000000001bfc5430 [ 0.000000] ACPI: DSDT (v001 A0557 A0557000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000001bfc0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 114624) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000001bfc0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 114624 [ 0.000000] On node 0 totalpages: 114527 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1085 pages reserved [ 0.000000] DMA zone: 2858 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1511 pages used for memmap [ 0.000000] DMA32 zone: 109017 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000 [ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 111875 [ 0.000000] Kernel command line: root=UUID=f9e68f04-d716-42ee-914e-d3341f8b3184 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 121.886697] Console: colour VGA+ 80x25 [ 121.887130] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 121.887419] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 121.887473] Checking aperture... [ 121.887476] CPU 0: aperture @ 97be000000 size 32 MB [ 121.887478] Aperture too small (32 MB) [ 121.893375] No AGP bridge found [ 121.898858] Memory: 439764k/458496k available (2217k kernel code, 18344k reserved, 1162k data, 304k init) [ 121.977831] Calibrating delay using timer specific routine.. 4023.46 BogoMIPS (lpj=8046931) [ 121.977889] Security Framework v1.0.0 initialized [ 121.977896] SELinux: Disabled at boot. [ 121.977921] Mount-cache hash table entries: 256 [ 121.978077] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 121.978080] CPU: L2 Cache: 512K (64 bytes/line) [ 121.978083] CPU 0/0 -> Node 0 [ 121.978107] SMP alternatives: switching to UP code [ 121.978442] Early unpacking initramfs... done [ 122.288517] ACPI: Core revision 20060707 [ 122.289013] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 122.334552] Using local APIC timer interrupts. [ 122.384262] result 12556947 [ 122.384264] Detected 12.556 MHz APIC timer. [ 122.385318] Brought up 1 CPUs [ 122.385391] time.c: Using 25.000000 MHz WALL HPET GTOD HPET/TSC timer. [ 122.385393] time.c: Detected 2009.109 MHz processor. [ 122.385683] Time: 1:11:34 Date: 06/04/108 [ 122.385720] NET: Registered protocol family 16 [ 122.385803] ACPI: bus type pci registered [ 122.385809] PCI: Using configuration type 1 [ 122.392987] ACPI: Interpreter enabled [ 122.392990] ACPI: Using IOAPIC for interrupt routing [ 122.393546] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 122.393551] PCI: Probing PCI hardware (bus 00) [ 122.394099] Boot video device is 0000:00:0d.0 [ 122.394202] PCI: Transparent bridge - 0000:00:04.0 [ 122.394394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 122.410254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 122.410791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 122.411099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 122.411242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 122.413056] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 122.413525] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 122.413977] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 122.414428] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 122.414880] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 122.415331] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 122.415783] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 122.416234] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 122.416691] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11 [ 122.417141] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 122.417622] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 122.418071] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 122.418523] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 122.418973] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11 [ 122.419445] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 122.419918] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 122.420369] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *0, disabled. [ 122.420819] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 122.421357] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 122.421443] Linux Plug and Play Support v0.97 (c) Adam Belay [ 122.421458] pnp: PnP ACPI init [ 122.429352] pnp: PnP ACPI: found 16 devices [ 122.429408] PCI: Using ACPI for IRQ routing [ 122.429411] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 122.429477] NET: Registered protocol family 8 [ 122.429479] NET: Registered protocol family 20 [ 122.429494] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 122.429498] hpet0: 3 32-bit timers, 25000000 Hz [ 122.431971] pnp: 00:0c: ioport range 0x230-0x23f has been reserved [ 122.431974] pnp: 00:0c: ioport range 0x290-0x29f has been reserved [ 122.431977] pnp: 00:0c: ioport range 0xa00-0xa0f has been reserved [ 122.431980] pnp: 00:0c: ioport range 0xa10-0xa1f has been reserved [ 122.432232] PCI: Bridge: 0000:00:04.0 [ 122.432234] IO window: disabled. [ 122.432237] MEM window: disabled. [ 122.432239] PREFETCH window: disabled. [ 122.432242] PCI: Bridge: 0000:00:09.0 [ 122.432243] IO window: disabled. [ 122.432245] MEM window: disabled. [ 122.432247] PREFETCH window: disabled. [ 122.432249] PCI: Bridge: 0000:00:0b.0 [ 122.432250] IO window: disabled. [ 122.432252] MEM window: disabled. [ 122.432254] PREFETCH window: disabled. [ 122.432256] PCI: Bridge: 0000:00:0c.0 [ 122.432257] IO window: disabled. [ 122.432259] MEM window: disabled. [ 122.432261] PREFETCH window: disabled. [ 122.432271] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 122.432278] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 122.432283] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 122.432288] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 122.432360] NET: Registered protocol family 2 [ 122.469248] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 122.469344] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 122.469523] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 122.469610] TCP: Hash tables configured (established 16384 bind 8192) [ 122.469612] TCP reno registered [ 122.481276] checking if image is initramfs... it is [ 123.057712] Freeing initrd memory: 6829k freed [ 123.063475] audit: initializing netlink socket (disabled) [ 123.063489] audit(1215133894.140:1): initialized [ 123.063633] VFS: Disk quotas dquot_6.5.1 [ 123.063652] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 123.063699] io scheduler noop registered [ 123.063702] io scheduler anticipatory registered [ 123.063704] io scheduler deadline registered [ 123.063714] io scheduler cfq registered (default) [ 123.587313] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 123.587332] assign_interrupt_mode Found MSI capability [ 123.587336] Allocate Port Service[0000:00:09.0:pcie00] [ 123.587396] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 123.587414] assign_interrupt_mode Found MSI capability [ 123.587416] Allocate Port Service[0000:00:0b.0:pcie00] [ 123.587469] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 123.587487] assign_interrupt_mode Found MSI capability [ 123.587489] Allocate Port Service[0000:00:0c.0:pcie00] [ 123.608980] Real Time Clock Driver v1.12ac [ 123.609148] hpet_resources: 0xfed00000 is busy [ 123.609162] Linux agpgart interface v0.102 (c) Dave Jones [ 123.609164] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 123.609287] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 123.609863] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 123.610026] mice: PS/2 mouse device common for all mice [ 123.610498] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 123.610690] input: Macintosh mouse button emulation as /class/input/input0 [ 123.610723] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 123.610727] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 123.610908] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 123.611173] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 123.611177] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 123.611337] TCP cubic registered [ 123.611345] NET: Registered protocol family 1 [ 123.611466] ACPI: (supports S0 S1 S3 S4 S5) [ 123.611509] Magic number: 0:25:154 [ 123.611569] hash matches device ttyp8 [ 123.611690] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 123.611782] Freeing unused kernel memory: 304k freed [ 123.633384] input: AT Translated Set 2 keyboard as /class/input/input1 [ 124.799777] Capability LSM initialized [ 124.834303] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 125.405122] usbcore: registered new interface driver usbfs [ 125.405147] usbcore: registered new interface driver hub [ 125.405168] usbcore: registered new device driver usb [ 125.405931] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 125.406391] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 125.406402] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 125.406417] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 125.406420] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 125.406576] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 125.406594] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdffff000 [ 125.435710] SCSI subsystem initialized [ 125.441048] libata version 2.20 loaded. [ 125.448730] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 125.493784] usb usb1: configuration #1 chosen from 1 choice [ 125.493809] hub 1-0:1.0: USB hub found [ 125.493820] hub 1-0:1.0: 10 ports detected [ 125.539772] Floppy drive(s): fd0 is 1.44M [ 125.601795] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 125.601808] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 125.601822] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 125.601826] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 125.601853] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 125.601887] ehci_hcd 0000:00:02.1: debug port 1 [ 125.601890] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 125.601903] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdfffec00 [ 125.601910] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 125.601981] usb usb2: configuration #1 chosen from 1 choice [ 125.602007] hub 2-0:1.0: USB hub found [ 125.602013] hub 2-0:1.0: 10 ports detected [ 125.607924] FDC 0 is a post-1991 82077 [ 125.712728] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0 [ 125.712748] NFORCE-MCP61: chipset revision 162 [ 125.712750] NFORCE-MCP61: not 100% native mode: will probe irqs later [ 125.712756] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller [ 125.712766] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA [ 125.712776] Probing IDE interface ide0... [ 126.016497] hda: SAMSUNG SP0802N, ATA DISK drive [ 126.264061] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 126.467875] hdb: HL-DT-ST DVDRAM GSA-H42N, ATAPI CD/DVD-ROM drive [ 126.525344] usb 1-1: configuration #1 chosen from 1 choice [ 126.529112] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 126.543254] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 126.543267] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 126.543273] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 126.543283] forcedeth: using HIGHDMA [ 126.560459] hda: max request size: 512KiB [ 126.568472] hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33) [ 126.569139] hda: cache flushes supported [ 126.569191] hda: hda1 hda2 < hda5 hda6 hda7 hda8 > [ 126.661651] hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 126.661659] Uniform CD-ROM driver Revision: 3.20 [ 127.063296] Attempting manual resume [ 127.063300] swsusp: Resume From Partition 3:8 [ 127.063302] PM: Checking swsusp image. [ 127.063546] PM: Resume from disk failed. [ 127.067394] eth0: forcedeth.c: subsystem: 01043:8234 bound to 0000:00:07.0 [ 127.096525] kjournald starting. Commit interval 5 seconds [ 127.096535] EXT3-fs: mounted filesystem with ordered data mode. [ 137.081533] eth0: no link during initialization. [ 138.411928] NET: Registered protocol family 17 [ 138.901989] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 138.905925] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 139.089377] input: PC Speaker as /class/input/input2 [ 139.363126] input: ImPS/2 Generic Wheel Mouse as /class/input/input3 [ 139.602766] parport: PnPBIOS parport detected. [ 139.602813] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 139.833809] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 139.840048] usbcore: registered new interface driver cdc_acm [ 139.840054] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters [ 139.861856] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 139.861867] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 20 [ 139.861889] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 140.282868] fuse init (API version 7.8) [ 140.316098] lp0: using parport0 (interrupt-driven). [ 140.366914] Adding 465844k swap on /dev/disk/by-uuid/def261a8-31b2-44dd-a0e1-9106938dbd24. Priority:-1 extents:1 across:465844k [ 141.375379] EXT3 FS on hda7, internal journal [ 172.471078] Using specific hotkey driver [ 172.523478] input: Power Button (FF) as /class/input/input4 [ 172.527622] ACPI: Power Button (FF) [PWRF] [ 172.550710] input: Power Button (CM) as /class/input/input5 [ 172.554795] ACPI: Power Button (CM) [PWRB] [ 172.568481] ibm_acpi: ec object not found [ 172.652925] No dock devices found. [ 172.674083] pcc_acpi: loading... [ 172.876012] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) [ 172.876055] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xc [ 172.876058] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xe [ 172.876060] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 176.372911] ppdev: user-space parallel port driver [ 177.668698] Bluetooth: Core ver 2.11 [ 177.668758] NET: Registered protocol family 31 [ 177.668760] Bluetooth: HCI device and connection manager initialized [ 177.668764] Bluetooth: HCI socket layer initialized [ 177.713242] Bluetooth: L2CAP ver 2.8 [ 177.713246] Bluetooth: L2CAP socket layer initialized [ 177.725066] Bluetooth: RFCOMM socket layer initialized [ 177.725081] Bluetooth: RFCOMM TTY layer initialized [ 177.725083] Bluetooth: RFCOMM ver 1.8 [ 181.742550] NET: Registered protocol family 10 [ 181.742650] lo: Disabled Privacy Extensions [ 181.742709] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 210.625726] PPP generic driver version 2.4.2 [ 212.964077] PPP BSD Compression module registered [ 212.995429] PPP Deflate Compression module registered
This is the output of lspci,lsmod & dmesg.....(of course from feisty).....And secondly,my internet connection is not good enough to allow me to upgrade feisty.....i have a 64 bit installer cd of hardy heron(sent to me by shipit against my requisition from my launchpad account),so i am interested in a fresh install of hardy(replacing feisty) rather than upgrading feisty to hardy. On Tue, Jul 1, 2008 at 4:45 AM, Dimitrios Symeonidis <[EMAIL PROTECTED]> wrote: > You have an Nvidia Southbridge. The problem seems to be your IDE/SATA > controller... Can you tell me the output of lspci and lsmod? Also dmesg... > Also, just to clarify: You don't want to upgrade feisty, right? > > -- > hard disk device not detected in hardy heron 64 bit > https://bugs.launchpad.net/bugs/244375 > You received this bug notification because you are a direct subscriber > of the bug. > -- Bullet -- hard disk device not detected in hardy heron 64 bit https://bugs.launchpad.net/bugs/244375 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs