As soon as I set the IP address manually in the boot syntax It goes
straight past the section where the system hung previously. Here is an
updated bootlog.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-16-server ([EMAIL PROTECTED]) (gcc version 
4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:58:00 UTC 2008 (Ubuntu 
2.6.24-16.30-server)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
[    0.000000]  BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bffcbac0 (usable)
[    0.000000]  BIOS-e820: 00000000bffcbac0 - 00000000bffcee00 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bffcee00 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] 4224MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 0009a540
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->  1310720
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->  1310720
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xC00FDFD0 checksum 0
[    0.000000] ACPI: RSDP 000FDFD0, 0024 (r2 IBM   )
[    0.000000] ACPI: XSDT BFFCED00, 004C (r1 IBM    SERDEFNT     1000 IBM  
45444F43)
[    0.000000] ACPI: FACP BFFCEC40, 0084 (r2 IBM    SERDEFNT     1000 IBM  
45444F43)
[    0.000000] ACPI: DSDT BFFCBAC0, 26CF (r2 IBM    SERDEFNT     1000 INTL 
20041203)
[    0.000000] ACPI: FACS BFFCEA00, 0040
[    0.000000] ACPI: APIC BFFCEBC0, 0068 (r1 IBM    SERDEFNT     1000 IBM  
45444F43)
[    0.000000] ACPI: SRAT BFFCEAC0, 00C8 (r1 IBM    SERDEFNT     1000 IBM  
45444F43)
[    0.000000] ACPI: HPET BFFCEA80, 0038 (r1 IBM    SERDEFNT     1000 IBM  
45444F43)
[    0.000000] ACPI: MCFG BFFCEA40, 003C (r1 IBM    SERDEFNT     1000 IBM  
45444F43)
[    0.000000] ACPI: PM-Timer IO Port: 0x588
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at c4000000 (gap: 
c0000000:3ec00000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009a000 - 
00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 
00000000000e0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 
0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 1300480
[    0.000000] Kernel command line: 
initrd=ubuntu-installer/initrd.img-2.6.24-16-nfs root=/dev/nfs 
nfsroot=192.168.10.1:/builds/ubuntu-nfs,nolock 
ip=192.168.10.254:192.168.10.1:192.168.10.1:255.255.255.0:ntteo-nfs:eth0:off 
console=ttyS0,19200n81 BOOT_IMAGE=ubuntu-installer/vmlinuz-2.6.24-16-server
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 3000.120 MHz processor.
[  147.850819] Console: colour VGA+ 80x25
[  147.850837] console [ttyS0] enabled
[  150.058608] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[  150.100909] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[  150.308590] Memory: 4139920k/5242880k available (2255k kernel code, 53016k 
reserved, 1032k data, 384k init, 3276588k highmem)
[  150.376183] virtual kernel memory layout:
[  150.376183]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
[  150.376184]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[  150.376185]     vmalloc : 0xf8800000 - 0xffbfe000   ( 115 MB)
[  150.376185]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[  150.376186]       .init : 0xc043c000 - 0xc049c000   ( 384 kB)
[  150.376186]       .data : 0xc0333e95 - 0xc0435fe4   (1032 kB)
[  150.376187]       .text : 0xc0100000 - 0xc0333e95   (2255 kB)
[  150.640506] Checking if this processor honours the WP bit even in supervisor 
mode... Ok.
[  150.688935] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, 
Nodes=1
[  150.884673] Calibrating delay using timer specific routine.. 6003.60 
BogoMIPS (lpj=30018047)
[  150.935187] Security Framework initialized
[  150.959696] SELinux:  Disabled at boot.
[  150.982658] AppArmor: AppArmor initialized
[  151.007167] Failure registering capabilities with primary security module.
[  151.048308] Mount-cache hash table entries: 512
[  151.075502] Initializing cgroup subsys ns
[  151.099468] Initializing cgroup subsys cpuacct
[  151.126072] monitor/mwait feature present.
[  151.150578] using mwait in idle threads.
[  151.174007] CPU: L1 I cache: 32K, L1 D cache: 32K
[  151.202211] CPU: L2 cache: 4096K
[  151.221481] CPU: Physical Processor ID: 0
[  151.245426] CPU: Processor Core ID: 0
[  151.267299] Compat vDSO mapped to ffffe000.
[  151.292336] Checking 'hlt' instruction... OK.
[  151.357172] SMP alternatives: switching to UP code
[  151.386882] Early unpacking initramfs... done
[  151.582784] ACPI: Core revision 20070126
[  151.606244] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not 
found.
[  151.653364] CPU0: Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 06
[  151.696239] SMP alternatives: switching to SMP code
[  151.725957] Booting processor 1/1 eip 3000
[  151.760735] Initializing CPU#1
[  151.903706] Calibrating delay using timer specific routine.. 6000.24 
BogoMIPS (lpj=30001208)
[  151.903715] monitor/mwait feature present.
[  151.903717] CPU: L1 I cache: 32K, L1 D cache: 32K
[  151.903718] CPU: L2 cache: 4096K
[  151.903720] CPU: Physical Processor ID: 0
[  151.903721] CPU: Processor Core ID: 1
[  151.904283] CPU1: Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 06
[  152.133481] Total of 2 processors activated (12003.85 BogoMIPS).
[  152.169556] ENABLING IO-APIC IRQs
[  152.189529] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[  152.443285] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[  152.500279] Brought up 2 CPUs
[  152.518224] net_namespace: 64 bytes
[  152.539076] Booting paravirtualized kernel on bare hardware
[  152.572700] Time: 17:04:16  Date: 08/07/08
[  152.597215] NET: Registered protocol family 16
[  152.623911] EISA bus registered
[  152.642703] ACPI: bus type pci registered
[  152.666868] PCI: PCI BIOS revision 2.10 entry at 0xfd87e, last bus=20
[  152.705394] PCI: Using configuration type 1
[  152.730379] Setting up standard PCI resources
[  152.758309] ACPI: Interpreter enabled
[  152.780193] ACPI: (supports S0 S4 S5)
[  152.802317] ACPI: Using IOAPIC for interrupt routing
[  152.833335] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  152.871061] PCI: Transparent bridge - 0000:00:1e.0
[  152.902072] ACPI: PCI Interrupt Link [LP00] (IRQs *11)
[  152.933021] ACPI: PCI Interrupt Link [LP01] (IRQs *10)
[  152.963973] ACPI: PCI Interrupt Link [LP02] (IRQs *3)
[  152.994413] ACPI: PCI Interrupt Link [LP03] (IRQs *3)
[  153.024827] ACPI: Blank IRQ resource
[  153.046182] ACPI: Resource is not an IRQ entry
[  153.072748] ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
[  153.108918] ACPI: Blank IRQ resource
[  153.130275] ACPI: Resource is not an IRQ entry
[  153.156838] ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
[  153.193036] ACPI: PCI Interrupt Link [LP06] (IRQs *11)
[  153.223990] ACPI: PCI Interrupt Link [LP07] (IRQs *5)
[  153.254417] Linux Plug and Play Support v0.97 (c) Adam Belay
[  153.288296] pnp: PnP ACPI init
[  153.306567] ACPI: bus type pnp registered
[  153.336762] pnp: PnP ACPI: found 11 devices
[  153.361775] ACPI: ACPI bus type pnp unregistered
[  153.389359] PnPBIOS: Disabled by ACPI PNP
[  153.413486] PCI: Using ACPI for IRQ routing
[  153.438496] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, 
post a report
[  153.799357] NET: Registered protocol family 8
[  153.825401] NET: Registered protocol family 20
[  153.851959] NetLabel: Initializing
[  153.872306] NetLabel:  domain hash size = 128
[  153.898328] NetLabel:  protocols = UNLABELED CIPSOv4
[  153.927991] NetLabel:  unlabeled traffic allowed by default
[  153.961337] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[  153.990728] hpet0: 3 64-bit timers, 14318180 Hz
[  154.018808] AppArmor: AppArmor Filesystem Enabled
[  154.022024] Time: tsc clocksource has been installed.
[  154.114486] system 00:01: ioport range 0x520-0x53f has been reserved
[  154.152477] system 00:01: ioport range 0x540-0x547 has been reserved
[  154.190447] system 00:09: ioport range 0x400-0x43f has been reserved
[  154.228466] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[  154.266437] system 00:09: ioport range 0x540-0x55f could not be reserved
[  154.306486] system 00:09: ioport range 0x580-0x5ff has been reserved
[  154.344457] system 00:09: ioport range 0x800-0x80f has been reserved
[  154.382429] system 00:09: ioport range 0xca8-0xcaf has been reserved
[  154.420400] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[  154.463042] system 00:09: iomem range 0xfecc0000-0xfecc3fff could not be 
reserved
[  154.507766] system 00:09: iomem range 0xfe000000-0xfe01ffff has been reserved
[  154.550413] system 00:09: iomem range 0xfe020000-0xfe6fffff has been reserved
[  154.593057] system 00:09: iomem range 0xfe700400-0xfebfffff has been reserved
[  154.635701] system 00:09: iomem range 0xfff00000-0xffffffff could not be 
reserved
[  154.710798] PCI: Bridge: 0000:11:00.0
[  154.732675]   IO window: disabled.
[  154.753033]   MEM window: disabled.
[  154.773869]   PREFETCH window: disabled.
[  154.797337] PCI: Bridge: 0000:11:01.0
[  154.819210]   IO window: disabled.
[  154.839566]   MEM window: disabled.
[  154.860401]   PREFETCH window: disabled.
[  154.883869] PCI: Bridge: 0000:10:00.0
[  154.905743]   IO window: disabled.
[  154.926098]   MEM window: disabled.
[  154.946931]   PREFETCH window: disabled.
[  154.970402] PCI: Bridge: 0000:10:00.3
[  154.992275]   IO window: disabled.
[  155.012628]   MEM window: disabled.
[  155.033463]   PREFETCH window: disabled.
[  155.056936] PCI: Bridge: 0000:00:02.0
[  155.078810]   IO window: disabled.
[  155.099117]   MEM window: disabled.
[  155.119947]   PREFETCH window: disabled.
[  155.143373] PCI: Bridge: 0000:00:03.0
[  155.165241]   IO window: disabled.
[  155.185549]   MEM window: disabled.
[  155.206376]   PREFETCH window: disabled.
[  155.229804] PCI: Bridge: 0000:00:04.0
[  155.251671]   IO window: 5000-ffff
[  155.271981]   MEM window: disabled.
[  155.292809]   PREFETCH window: disabled.
[  155.316237] PCI: Bridge: 0000:00:05.0
[  155.338103]   IO window: disabled.
[  155.358410]   MEM window: disabled.
[  155.379240]   PREFETCH window: disabled.
[  155.402668] PCI: Bridge: 0000:03:00.0
[  155.424534]   IO window: disabled.
[  155.444846]   MEM window: c7000000-caefffff
[  155.469829]   PREFETCH window: disabled.
[  155.493258] PCI: Bridge: 0000:00:06.0
[  155.515124]   IO window: disabled.
[  155.535435]   MEM window: c7000000-caefffff
[  155.560417]   PREFETCH window: disabled.
[  155.583847] PCI: Bridge: 0000:00:07.0
[  155.605764]   IO window: 4000-4fff
[  155.626075]   MEM window: cb000000-ccffffff
[  155.651055]   PREFETCH window: caf00000-caffffff
[  155.678636] PCI: Bridge: 0000:05:00.0
[  155.700502]   IO window: disabled.
[  155.720812]   MEM window: cd000000-cfffffff
[  155.745847]   PREFETCH window: disabled.
[  155.769328] PCI: Bridge: 0000:00:1c.0
[  155.791242]   IO window: disabled.
[  155.811555]   MEM window: cd000000-cfffffff
[  155.836538]   PREFETCH window: disabled.
[  155.859965] PCI: Bridge: 0000:00:1e.0
[  155.881880]   IO window: 3000-3fff
[  155.902191]   MEM window: de000000-dfffffff
[  155.927172]   PREFETCH window: d0000000-ddffffff
[  155.955316] ACPI: PCI Interrupt 0000:11:00.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[  155.999897] ACPI: PCI Interrupt 0000:11:01.0[A] -> GSI 17 (level, low) -> 
IRQ 17
[  156.044659] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[  156.088947] NET: Registered protocol family 2
[  156.212511] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[  156.255318] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
[  156.299877] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[  156.339603] TCP: Hash tables configured (established 131072 bind 65536)
[  156.379164] TCP reno registered
[  156.422368] checking if image is initramfs... it is
[  156.785921] Freeing initrd memory: 6874k freed
[  156.813039] audit: initializing netlink socket (disabled)
[  156.845346] audit(1218128655.980:1): initialized
[  156.873366] highmem bounce pool size: 64 pages
[  156.899946] Total HugeTLB memory allocated, 0
[  156.927243] VFS: Disk quotas dquot_6.5.1
[  156.950728] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  156.989871] io scheduler noop registered
[  157.013324] io scheduler anticipatory registered
[  157.040908] io scheduler deadline registered (default)
[  157.071611] io scheduler cfq registered
[  157.094740] assign_interrupt_mode Found MSI capability
[  157.125570] assign_interrupt_mode Found MSI capability
[  157.156362] assign_interrupt_mode Found MSI capability
[  157.187165] assign_interrupt_mode Found MSI capability
[  157.217963] assign_interrupt_mode Found MSI capability
[  157.248770] assign_interrupt_mode Found MSI capability
[  157.279581] assign_interrupt_mode Found MSI capability
[  157.313293] assign_interrupt_mode Found MSI capability
[  157.346605] assign_interrupt_mode Found MSI capability
[  157.379069] isapnp: Scanning for PnP cards...
[  157.760811] isapnp: No Plug & Play device found
[  157.802811] Real Time Clock Driver v1.12ac
[  157.827456] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing 
enabled
[  157.873867] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  157.910159] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  157.943982] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 
blocksize
[  157.989311] input: Macintosh mouse button emulation as 
/devices/virtual/input/input0
[  158.035689] PNP: No PS/2 controller found. Probing ports directly.
[  158.588486] i8042.c: Can't read CTR while initializing i8042.
[  158.622866] i8042: probe of i8042 failed with error -5
[  158.687660] mice: PS/2 mouse device common for all mice
[  158.718965] EISA: Probing bus 0 at eisa.0
[  158.742960] Cannot allocate resource for EISA slot 3
[  158.772662] Cannot allocate resource for EISA slot 4
[  158.802317] Cannot allocate resource for EISA slot 5
[  158.831980] Cannot allocate resource for EISA slot 6
[  158.861639] Cannot allocate resource for EISA slot 7
[  158.891297] Cannot allocate resource for EISA slot 8
[  158.920952] EISA: Detected 0 cards.
[  158.941785] cpuidle: using governor ladder
[  158.966247] cpuidle: using governor menu
[  158.989728] NET: Registered protocol family 1
[  159.015766] Using IPI No-Shortcut mode
[  159.038216] registered taskstats version 1
[  159.062787]   Magic number: 4:852:86
[  159.084203] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[  159.120368] Freeing unused kernel memory: 384k freed
Loading, please wait...
Begin: Loading essential drivers[  159.264227] ACPI: Processor [CPU1] (supports 
8 throttling states... ...
)
[  159.311860] ACPI: Processor [CPU0] (supports 8 throttling states)
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/nfs-top ...
[  159.530514] SCSI subsystem initialized
[  159.564559] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 
(December 8, 2007)
[  159.612977] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> 
IRQ 18
[  159.663030] usbcore: registered new interface driver usbfs
[  159.695874] usbcore: registered new interface driver hub
[  159.729094] Adaptec aacraid driver 1.1-5[2449]-ms
[  159.757306] usbcore: registered new device driver usb
[  159.822479] USB Universal Host Controller Interface driver v3.0
[  160.356207] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 
133MHz found at mem c8000000, IRQ 18, node addr 00:14:5e:16:36:73
[  160.432665] ACPI: PCI Interrupt 0000:02:00.0[A] -> <6>ACPI: PCI Interrupt 
0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[  160.498746] GSI 17 (level, low) -> IRQ 17
[  160.758372] AAC0: kernel 5.1-0[9237] May 30 2006
[  160.785986] AAC0: monitor 5.1-0[9237]
[  160.807856] AAC0: bios 5.1-0[9237]
[  160.828167] AAC0: serial 600A4001
[  160.847956] AAC0: 64bit support enabled.
[  160.871384] AAC0: 64 Bit DAC enabled
[  160.900040] scsi0 : ServeRAID
[  160.917959] scsi 0:0:0:0: Direct-Access     ServeRA  RAID1            V1.0 
PQ: 0 ANSI: 2
[  160.971747] scsi 0:1:1:0: Direct-Access     IBM-ESXS ST973401SS       B51D 
PQ: 0 ANSI: 5
[  161.022400] scsi 0:1:3:0: Direct-Access     IBM-ESXS ST973401SS       B51D 
PQ: 0 ANSI: 5
[  161.028040] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 
133MHz found at mem ce000000, IRQ 16, node addr 00:14:5e:16:36:75
[  161.148060] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> 
IRQ 19
[  161.192342] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[  161.223835] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus 
number 1
[  161.271970] ehci_hcd 0000:00:1d.7: debug port 1
[  161.299089] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf9000000
[  161.350755] scsi 0:3:0:0: Enclosure         IBM      SAS SES-2 DEVICE 1.06 
PQ: 0 ANSI: 5
[  161.355259] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 
2004
[  161.355338] usb usb1: configuration #1 chosen from 1 choice
[  161.355354] hub 1-0:1.0: USB hub found
[  161.355358] hub 1-0:1.0: 6 ports detected
[  161.524958] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 23 (level, low) -> 
IRQ 19
[  161.569351] scsi1 : ata_piix
[  161.586623] scsi2 : ata_piix
[  161.603846] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x480 irq 14
[  161.644989] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x488 irq 15
[  161.735872] Driver 'sd' needs updating - please use bus_type methods
[  161.773957] sd 0:0:0:0: [sda] 143132672 512-byte hardware sectors (73284 MB)
[  161.816152] sd 0:0:0:0: [sda] Write Protect is off
[  161.844840] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  161.844895] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
supports DPO and FUA
[  161.844932] sd 0:0:0:0: [sda] 143132672 512-byte hardware sectors (73284 MB)
[  161.844938] sd 0:0:0:0: [sda] Write Protect is off
[  161.844950] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
supports DPO and FUA
[  161.844951]  sda: sda1 sda2
[  162.065940] scsi 0:1:1:0: Attached scsi generic sg1 type 0
[  162.066026] sd 0:0:0:0: [sda] Attached SCSI removable disk
[  162.131538] scsi 0:1:3:0: Attached scsi generic sg2 type 0
[  162.164369] scsi 0:3:0:0: Attached scsi generic sg3 type 13
[  162.174718] ata1.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, 1.02, max 
UDMA/33
[  162.424344] ata1.00: configured for UDMA/33
[  162.453595] scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4244N 1.02 
PQ: 0 ANSI: 5
[  162.502034] scsi 1:0:0:0: Attached scsi generic sg4 type 5
[  162.534855] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> 
IRQ 19
[  162.579180] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[  162.610458] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 2
[  162.654715] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00002200
[  162.689163] usb usb2: configuration #1 chosen from 1 choice
[  162.722498] hub 2-0:1.0: USB hub found
[  162.744925] hub 2-0:1.0: 2 ports detected
[  162.876202] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> 
IRQ 20
[  162.920543] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[  162.951824] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 3
[  162.996088] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00002600
[  163.030520] usb usb3: configuration #1 chosen from 1 choice
[  163.063868] hub 3-0:1.0: USB hub found
[  163.086294] hub 3-0:1.0: 2 ports detected
[  163.213353] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> 
IRQ 19
[  163.257657] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[  163.288934] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 4
[  163.333196] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00002a00
[  163.367632] usb usb4: configuration #1 chosen from 1 choice
[  163.400991] hub 4-0:1.0: USB hub found
[  163.423408] hub 4-0:1.0: 2 ports detected
[  163.557152] Driver 'sr' needs updating - please use bus_type methods
[  163.612239] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[  163.652856] Uniform CD-ROM driver Revision: 3.20
Done.
[  163.775057] RPC: Registered udp transport module.
[  163.803159] RPC: Registered tcp transport module.
[  163.838853] NET: Registered protocol family 17
IP-Config: eth0 hardware address 00:14:5e:16:36:73 mtu 1500
[  164.012498] bnx2: eth0: using MSI
IP-Config: eth0 guessed broadcast address 192.168.10.255
IP-Config: eth0 guessed nameserver address 192.168.10.1
IP-Config: eth0 complete (from 192.168.10.1):
 address: 192.168.10.254   broadcast: 192.168.10.255   netmask: 255.255.255.0
 gateway: 192.168.10.1     dns0     : 192.168.10.1     dns1   : 0.0.0.0
 host   : ntteo-nfs
 rootserver: 192.168.10.1 rootpath:
 filename  :
Begin: Running /scripts/nfs-premount ...
Done.

-- 
NFSroot broken on hardy
https://bugs.launchpad.net/bugs/221613
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to