Le Dimanche 1 Octobre 2006 18:18, christophe jenaux a écrit : > /var/run/wpa_supplicant/ton_interfaces_réseau n'existe que si > wpa_suppliacant tourne, tu peux rajouter -dd pour avoir plus d'info sur > l'erreur, -dd c'est le mode debug.
Merci, Christophe, Voici donc le résultat : [EMAIL PROTECTED]:~# wpa_supplicant -dd -c/etc/wpa_supplicant.conf -w -Dwext -ieth1 Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' ctrl_interface='/var/run/wpa_supplicant' ap_scan=1 Line: 5 - start of a new network block ssid - hexdump_ascii(len=12): 4e 39 55 46 5f 54 45 4c 39 43 4f 4d N9UF_TEL9COM scan_ssid=1 (0x1) proto: 0x1 key_mgmt: 0x2 PSK - hexdump(len=32): [REMOVED] priority=5 (0x5) Priority group 5 id=0 ssid='N9UF_TEL9COM' Initializing interface (2) 'eth1' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 SIOCGIWRANGE: WE(compiled)=19 WE(source)=16 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf Own MAC address: 00:13:02:6a:97:50 wpa_driver_wext_set_wpa wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_countermeasures wpa_driver_wext_set_drop_unencrypted Setting scan request: 0 sec 100000 usec Added interface eth1 Wireless event: cmd=0x8b06 len=8 State: DISCONNECTED -> SCANNING Starting AP scan (specific SSID) Scan SSID - hexdump_ascii(len=12): 4e 39 55 46 5f 54 45 4c 39 43 4f 4d N9UF_TEL9COM Scan timeout - try to get results Received 194 bytes of scan results (1 BSSes) Scan results: 1 Selecting BSS from priority group 5 0: 00:16:ce:1c:a7:fb ssid='N9UF_TEL9COM' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE No suitable AP found. Setting scan request: 5 sec 0 usec Starting AP scan (broadcast SSID) Scan timeout - try to get results Received 194 bytes of scan results (1 BSSes) Scan results: 1 Selecting BSS from priority group 5 0: 00:16:ce:1c:a7:fb ssid='N9UF_TEL9COM' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE No suitable AP found. Setting scan request: 5 sec 0 usec .... Setting scan request: 5 sec 0 usec CTRL-EVENT-TERMINATING - signal 2 received Removing interface eth1 State: SCANNING -> DISCONNECTED No keys have been configured - skip key clearing EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 wpa_driver_wext_set_wpa wpa_driver_wext_set_drop_unencrypted wpa_driver_wext_set_countermeasures No keys have been configured - skip key clearing Cancelling scan request Moi, je n'y comprends rien, mais si ça vous dit quelque chose... Le Dimanche 1 Octobre 2006 20:22, Linformatique pour tous a écrit : > première question : peux tu te connecter à ton routeur wi-fi > > avec http://192.168. x.x qui est l'adresse du routeur Oui, Philbur, sans problème, au 192.168.1.1 -- Joël -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr