J Bond 0.07 wrote: > Où est ce que je redirige le port 3128, sur le serveur, ou sur les clents???? : mon firewall dit : # proxy transparent : regle de redirection vers le proxy # on considere que eth0 est l'interface du reseau prive # et que 3128 est le port du serveur proxy-cache #${IPT} -t nat -A PREROUTING -p tcp -i eth2 --dport 80 -j REDIRECT --to-port 3128
# Si la fonction passerelle est activee if [ ${IN} ]; J Bond 0.07 wrote: >> c.kumsta wrote: >>> Perso, pour entrer des IP en fixe, je le fais directement dans le >>> fichier "/etc/network/interfaces" >>> Par exemple, dans ton cas : >>> ======================================== >>> auto lo >>> iface lo inet loopback >>> >>> auto eth0 >>> iface eth0 inet static >>> address 192.168.0.4 >>> netmask 255.255.255.0 >>> >>> auto eth2 >>> iface eth1 inet static >>> address 192.168.88.1 >>> netmask 255.255.255.0 >>> ======================================== >> >> Mon fichier interfaces : >> This file describes the network interfaces available on your system >> # and how to activate them. For more information, see interfaces(5). >> >> # The loopback network interface >> auto lo eth2 >> iface lo inet loopback >> >> # This is a list of hotpluggable network interfaces. >> # They will be activated automatically by the hotplug subsystem. >> mapping hotplug >> script grep >> map eth2 >> >> # The primary network interface >> >> iface eth2 inet static >> address 192.168.88.1 >> netmask 255.255.255.0 >> gateway 192.168.1.4 >> >> >> >> >> auto dsl-provider >> iface dsl-provider inet ppp >> pre-up /sbin/ifconfig eth2 up # line maintained by pppoeconf >> provider dsl-provider >> >> auto eth0:avah >> iface eth0:avah inet manual >> >> #auto eth1 >> >> >> #auto eth0 >> >> >> #auto eth2 >> >> >> #auto eth2 >> >> iface eth1 inet static >> address 192.168.1.4 >> netmask 255.255.255.0 >> gateway 192.168.1.1 >> >> auto eth1 >> >> iface eth0 inet static >> address 192.168.1.4 >> netmask 255.255.255.0 >> gateway 192.168.0.50 >> >> auto eth0 >>> >>> (à mon avis, ce n'est pas la peine de rajouter de champs "gateway" >>> étant donné que c'est ta connexion vers ton FAI >>> qui va le régler au moment de la négociation avec ton FAI sur ppp0) >>> >>> ++dune2 >>> >>> [EMAIL PROTECTED]:~$ sudo ifconfig >> eth0 Lien encap:Ethernet HWaddr 00:13:8F:7A:C6:DD >> inet adr:192.168.1.4 Bcast:192.168.1.255 Masque:255.255.255.0 >> UP BROADCAST MULTICAST MTU:1500 Metric:1 >> Packets reçus:0 erreurs:0 :0 overruns:0 frame:0 >> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 lg file transmission:1000 >> Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b) >> Interruption:16 Adresse de base:0xc000 >> >> eth1 Lien encap:Ethernet HWaddr 00:18:E7:07:F9:F4 >> inet adr:192.168.1.4 Bcast:192.168.1.255 Masque:255.255.255.0 >> adr inet6: fe80::218:e7ff:fe07:f9f4/64 Scope:Lien >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> Packets reçus:45 erreurs:0 :0 overruns:0 frame:0 >> TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 lg file transmission:1000 >> Octets reçus:11692 (11.4 KB) Octets transmis:528 (528.0 b) >> Interruption:19 Adresse de base:0x2800 >> >> eth2 Lien encap:Ethernet HWaddr 00:10:A7:0C:8B:55 >> inet adr:192.168.88.1 Bcast:192.168.88.255 >> Masque:255.255.255.0 >> adr inet6: fe80::210:a7ff:fe0c:8b55/64 Scope:Lien >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> Packets reçus:4653 erreurs:0 :0 overruns:0 frame:0 >> TX packets:4201 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 lg file transmission:1000 >> Octets reçus:3285428 (3.1 MB) Octets transmis:465510 (454.5 KB) >> Interruption:20 Adresse de base:0xec00 >> >> lo Lien encap:Boucle locale >> inet adr:127.0.0.1 Masque:255.0.0.0 >> adr inet6: ::1/128 Scope:Hôte >> UP LOOPBACK RUNNING MTU:16436 Metric:1 >> Packets reçus:408 erreurs:0 :0 overruns:0 frame:0 >> TX packets:408 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 lg file transmission:0 >> Octets reçus:33437 (32.6 KB) Octets transmis:33437 (32.6 KB) >> >> ppp0 Lien encap:Protocole Point-à-Point >> inet adr:194.206.79.171 P-t-P:195.146.243.10 >> Masque:255.255.255.255 >> UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 >> Packets reçus:4345 erreurs:0 :0 overruns:0 frame:0 >> TX packets:3825 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 lg file transmission:3 >> Octets reçus:3171290 (3.0 MB) Octets transmis:357454 (349.0 KB) >> >> [EMAIL PROTECTED]:~$ >> >> ufconfig est bon, maintenant! >> [EMAIL PROTECTED]:~$ sudo route >> Table de routage IP du noyau >> Destination Passerelle Genmask Indic Metric Ref >> Use Iface >> lns2.l0.10.143. * 255.255.255.255 UH 0 0 >> 0 ppp0 >> 192.168.1.0 * 255.255.255.0 U 0 0 >> 0 eth0 >> 192.168.1.0 * 255.255.255.0 U 0 0 >> 0 eth1 >> 192.168.88.0 * 255.255.255.0 U 0 0 >> 0 eth2 >> link-local * 255.255.0.0 U 1000 0 >> 0 eth1 >> default * 0.0.0.0 U 0 0 >> 0 ppp0 >> [EMAIL PROTECTED]:~$ >> >> ça devrait marcher et ça marche pas : les ping sont perdus. >> >> Je regarde maintenant du coté des hosts et hosts.allow! : >> >> hosts: >> 127.0.0.1 localhost >> # >> # The following lines are desirable for IPv6 capable hosts >> ::1 ip6-localhost ip6-loopback >> fe00::0 ip6-localnet >> ff00::0 ip6-mcastprefix >> ff02::1 ip6-allnodes >> ff02::2 ip6-allrouters >> ff02::3 ip6-allhosts >> 192.168.88.3 violette >> 192.168.1.1 modem >> 192.168.0.50 dlink >> 192.168.88.5 lombric >> 192.168.1.4 crapaud.chikungugna.org >> >> hosts.allow : >> /etc/hosts.allow: list of hosts that are allowed to access the system. >> # See the manual pages hosts_access(5) and >> hosts_options(5). >> # >> # Example: ALL: LOCAL @some_netgroup >> # ALL: .foobar.edu EXCEPT terminalserver.foobar.edu >> # >> # If you're going to protect the portmapper use the name "portmap" for >> the >> # daemon name. Remember that you can only use the keyword "ALL" and IP >> # addresses (NOT host or domain names) for the portmapper, as well as for >> # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8) >> # for further information. >> # >> 192.168.88.3 violette >> 192.168.88.5 lombric >> 192.168.1.1 modem >> 192.168.0.50 dlink >> ALL: LOCAL @chikungugna.org >> 192.168.1.4 crapaud.chikungugna.org >> >> Où est l'erreur? : ça devient compliqué, et le tuto n'est peut etre >> pas trop clair.. >> >> > Feb 23 08:59:52 moustique dhcpd: All rights reserved. > Feb 23 08:59:52 moustique dhcpd: For info, please visit > http://www.isc.org/sw/dhcp/ > Feb 23 08:59:52 moustique dhcpd: Wrote 0 leases to leases file. > Feb 23 08:59:52 moustique dhcpd: > Feb 23 08:59:52 moustique dhcpd: No subnet declaration for eth1 > (192.168.1.4). > Feb 23 08:59:52 moustique dhcpd: ** Ignoring requests on eth1. If this > is not what > Feb 23 08:59:52 moustique dhcpd: you want, please write a subnet > declaration > Feb 23 08:59:52 moustique dhcpd: in your dhcpd.conf file for the > network segment > Feb 23 08:59:52 moustique dhcpd: to which interface eth1 is attached. ** > Feb 23 08:59:52 moustique dhcpd: > Feb 23 08:59:52 moustique dhcpd: > Feb 23 08:59:52 moustique dhcpd: No subnet declaration for eth0 > (192.168.1.4). > Feb 23 08:59:52 moustique dhcpd: ** Ignoring requests on eth0. If this > is not what > Feb 23 08:59:52 moustique dhcpd: you want, please write a subnet > declaration > Feb 23 08:59:52 moustique dhcpd: in your dhcpd.conf file for the > network segment > Feb 23 08:59:52 moustique dhcpd: to which interface eth0 is attached. ** > Feb 23 08:59:52 moustique dhcpd: > Feb 23 08:59:52 moustique dhcpd: Can't bind to dhcp address: Address > already in use > Feb 23 08:59:52 moustique dhcpd: Please make sure there is no other dhcp > server > Feb 23 08:59:52 moustique dhcpd: running and that there's no entry for > dhcp or > Feb 23 08:59:52 moustique dhcpd: bootp in /etc/inetd.conf. Also make > sure you > Feb 23 08:59:52 moustique dhcpd: are not running HP JetAdmin software, > which > Feb 23 08:59:52 moustique dhcpd: includes a bootp server. > Feb 23 08:59:52 moustique avahi-daemon[7568]: Server startup complete. > Host name is moustique.local. Local service cookie is 3633587936. > Feb 23 09:00:20 moustique hald: mounted /dev/sdc1 on behalf of uid 1000 > Feb 23 09:00:21 moustique hcid[7610]: Default passkey agent (:1.20, > /org/bluez/passkey) registered > Feb 23 09:00:21 moustique hcid[7610]: Default authorization agent > (:1.20, /org/bluez/auth) registered > Feb 23 09:00:23 moustique NetworkManager: <info> Updating allowed > wireless network lists. > Feb 23 09:00:23 moustique NetworkManager: <WARN> > nm_dbus_get_networks_cb(): error received: > org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless > networks stored.. > Feb 23 09:04:07 moustique ntpd[7539]: synchronized to 91.189.94.4, > stratum 2 > Feb 23 09:04:07 moustique ntpd[7539]: time reset -0.509176 s > Feb 23 09:04:07 moustique ntpd[7539]: kernel time sync status change 0001 > Feb 23 09:09:48 moustique ntpd[7539]: synchronized to 91.189.94.4, > stratum 2 > -- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr