Hi Kingsly, On Tue, Jun 9, 2009 at 1:31 PM, Kingsly John<member+ubu...@kingsly.net> wrote: > > These phones don't have drivers of their own, they usually work with generic > drivers. So it's most likely not a kernel level issue. (Did it work with > Ubuntu 7.x ??)
Yes it worked with 7.04 and 7.10 but not with 8.04 or 8.10. So if the phones don't have their own drivers where does it get uploaded from - was thinking that this is kind of built into the kernal. Strangely this device works on PCLinuxOS with kernal > > Can you do the following... Subsequent to your mail did the following (on Ubuntu 9.04) ~$ cat /proc/bus/usb/ > /tmp/usb-before cat: /proc/bus/usb/: Is a directory Seems like there is nothing in the above directory as seen below $ ls /proc/bus/usb/ ~$ (returned a blank) so am posting the output of dmesg - as follows $ dmesg > /tmp/usb-before_dmesg $ dmesg > /tmp/usb-after_dmesg $ diff /tmp/usb-before /tmp/usb-after_dmesg > /home/ram/Desktop/diff_dmesg.txt This last output is selectively copied and pasted below is with ref to the device ( am not sure if you want the whole dmesg) > [ 230.392069] usb 2-2: new full speed USB device using uhci_hcd and address 2 > [ 230.583651] usb 2-2: configuration #1 chosen from 1 choice > [ 230.710421] USB Serial support registered for TI USB 3410 1 port adapter > [ 230.710448] USB Serial support registered for TI USB 5052 2 port adapter > [ 230.710486] ti_usb_3410_5052 2-2:1.0: TI USB 3410 1 port adapter converter > detected > [ 230.710496] usb 2-2: firmware: requesting ti_usb-v0451-p3410.fw > [ 230.717968] usb 2-2: firmware: requesting ti_3410.fw > [ 231.344074] usb 2-2: reset full speed USB device using uhci_hcd and > address 2 > [ 231.544143] usb 2-2: device firmware changed > [ 231.544174] ti_usb_3410_5052: probe of 2-2:1.0 failed with error -5 > [ 231.544213] usbcore: registered new interface driver ti_usb_3410_5052 > [ 231.544218] ti_usb_3410_5052: v0.9:TI USB 3410/5052 Serial Driver > [ 231.544405] usb 2-2: USB disconnect, address 2 > [ 231.660105] usb 2-2: new full speed USB device using uhci_hcd and address 3 > [ 231.879285] usb 2-2: configuration #1 chosen from 2 choices > [ 231.881218] ti_usb_3410_5052 2-2:1.0: TI USB 3410 1 port adapter converter > detected > [ 231.881237] ti_usb_3410_5052: probe of 2-2:1.0 failed with error -5 > [ 231.883204] ti_usb_3410_5052 2-2:2.0: TI USB 3410 1 port adapter converter > detected > [ 231.883299] usb 2-2: TI USB 3410 1 port adapter converter now attached to > ttyUSB0 ** if you want the whole dmesg let me know will post it as an attachement so what seems to be the issue here. would appreciate help Thanks ram -- ubuntu-in mailing list ubuntu-in@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-in
