On Mon, Feb 22, 2010 at 12:49 AM, Moz <list...@gmail.com> wrote: > Hello All, > > I have been trying for a couple of hours to connect to the internet using > BSNL EVDO recently purchased, on Ubuntu Karmic or MSWin7. I followed the > usual configuration for usbserial devices, that is, loading the usbserial > module with appropriate options from > > Bus 003 Device 017: ID 19d2:fffe ONDA Communication S.p.A. > > And so on. But everytime, I get the messages > > Feb 22 01:10:32 uthink chat[2303]: ATDT#777^M^M > Feb 22 01:10:32 uthink chat[2303]: CONNECT > Feb 22 01:10:32 uthink chat[2303]: -- got it > Feb 22 01:10:32 uthink chat[2303]: send (\d) > Feb 22 01:10:33 uthink pppd[2301]: Serial connection established. > Feb 22 01:10:33 uthink pppd[2301]: Using interface ppp0 > Feb 22 01:10:33 uthink pppd[2301]: Connect: ppp0 <--> /dev/ttyUSB0 > Feb 22 01:11:04 uthink pppd[2301]: LCP: timeout sending Config-Requests > Feb 22 01:11:04 uthink pppd[2301]: Connection terminated. > Feb 22 01:11:05 uthink pppd[2301]: Modem hangup > Feb 22 01:11:05 uthink pppd[2301]: Exit. > > I tried with wvdial, gnome-ppp, pppconfig and so on, all with same results. > Any idea? > > Any help will be appreciated.
*** Hi am using the bsnl evdo AC8700 on Ubuntu 9.10 This is my wvdial.conf [Modem0] Modem = /dev/ttyUSB0 Baud = 115200 SetVolume = 0 Dial Command = ATDT Init1 = ATZ FlowControl = Hardware (CRTSCTS) Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 # Init3 = at+crm=1;+cmux=1;+cps=33;+cta=0 Modem Type = Analog Modem Baud = 115200 New PPPD = yes Idle Seconds = 90 Auto Reconnect = off [Dialer evdo] Modem = /dev/ttyUSB0 Baud = 230400 Phone = #777 Init1 = ATZ Stupid Mode = 1 Dial Command = ATDT Username = 165 Password = 165 # below line error in spelling crtcts which should be crtscts # PPPD Options = crtcts multilink usepeerdns lock defaultroute # PPPD Options = crtscts multilink usepeerdns lock defaultroute # Inherits = Modem0 This is dmesg when i connect the device USB Serial support registered for GSM modem (1-port) [ 143.355741] option 2-2:1.0: GSM modem (1-port) converter detected [ 143.355892] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 143.355936] option 2-2:1.1: GSM modem (1-port) converter detected [ 143.356067] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 143.356109] option 2-2:1.2: GSM modem (1-port) converter detected [ 143.356203] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2 [ 143.356245] option 2-2:1.3: GSM modem (1-port) converter detected [ 143.356340] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3 [ 143.356367] usbcore: registered new interface driver option *** I did not have to set anything up except wvdial, It worked for a while through network manager, it still works on another 9.10 machine but on mine its a bit reluctant,. It worked through gnome-pp too but i preferred wvdial and it works swell, am on it right now. The password is default for all evdo's in Uttarakhand (i think) ram -- ubuntu-in mailing list ubuntu-in@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-in