Hi you need to download that exact zip from the Ubuntu servers. It is the full Ubuntu userland. the cm-...tilapia.zip is the Android side, same as system.img and boot.img but packaged in a zip for easy update via the recovery image. So the Ubuntu side is prrebuilt for armhf and should be almost identical for each device. On this page http://cdimage.ubuntu.com/ubuntu-touch/saucy/daily-preinstalled/20131018/ you can see boot, recovery and system.img files which are the regular ones built from an Android tree for all four supported Nexus devices. Then there is also http://cdimage.ubuntu.com/ubuntu-touch/saucy/daily-preinstalled/20131018/saucy-preinstalled-touch-armhf.tar.gzwhich is the Ubuntu rootfs and which is device independent.
Also you do not fastboot flash system system.img . It is not the Android image that will be the rootfs. It is Ubuntu from the above zip, and the Android system.img lives under /var/lib/lxc/android and gets mounted only after the Ubuntu userland is booted up. So first you need to make sure you boot into Ubuntu and not Android. You have to use the ubuntu-touch-generic-initrd package as the initrd as seen in build/core/Makefile Jani On Wed, Nov 6, 2013 at 11:33 AM, Dmitry Smirnov <divis1...@gmail.com> wrote: > One more question. > > "Manual Download & Installation" section on > https://wiki.ubuntu.com/Touch/Install mentions > a saucy-preinstalled-touch-armel+grouper.zip as a second step in this > process. In case of my own port, should it become something like > cm-10.1-20131101-UNOFFICIAL-tilapia.zip which is generated by Android build? > > Also, it is unclear for me whether this step is really needed after > fastbooting recovery, boot, system in the first step? > > > 2013/11/6 Jani Monoses <jani.mono...@canonical.com> > >> --------- >> >>> Either way, you'll need the Ubuntu preinstalled image besides the one >>> you're going to build with the instructions below. You can find the Ubuntu >>> preinstalled images >>> here<http://cdimage.ubuntu.com/ubuntu-touch/daily-preinstalled/> >>> . >>> -------- >>> Probably there should be some instructions where to put it (I mean for >>> usual recovery procedure) >>> >>> >> I agree the documentation leaves a lot to be desired. >> I mostly inspected the installed software on a flashed nexus4 , but for >> people porting to new hardware without seeing Ubuntu on one of the >> supported devices the docs by themselves are indeed confusing. >> >> Jani >> > >
-- Mailing list: https://launchpad.net/~ubuntu-phone Post to : ubuntu-phone@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-phone More help : https://help.launchpad.net/ListHelp
