Здравствуйте, Dmitry Mityugov! Ответ на Ваше письмо от 31.01.2007 18:52 > Может-быть Ubuntu пытается как-то "усыпить" устройство?
По сканеру, кстати сегодня получил информацию о том, что происходит при сканировании: [EMAIL PROTECTED]:/home/juev# scanimage -v > test.pnm [sanei_debug] Setting debug level of plustek to 10. [plustek] Plustek backend V0.51-12, part of sane-backends 1.0.18 [plustek] Retrieving all supported and conntected devices [plustek] Available and supported devices: [plustek] Device: >libusb:001:012< - 0x04a9x0x2220 [plustek] ># Plustek-SANE Backend configuration file< [plustek] ># For use with LM9831/2/3 based USB scanners< [plustek] >#< [plustek] >< [plustek] ># each device needs at least two lines:< [plustek] ># - [usb] vendor-ID and product-ID< [plustek] ># - device devicename< [plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device /dev/usbscanner< [plustek] ># or< [plustek] ># device libusb:bbb:ddd< [plustek] ># where bbb is the busnumber and ddd the device number< [plustek] ># make sure that your user has access to /proc/bus/usb/bbb/ddd< [plustek] >#< [plustek] ># additionally you can specify some options< [plustek] ># warmup, lOffOnEnd, lampOff< [plustek] >#< [plustek] ># For autodetection use< [plustek] ># [usb]< [plustek] ># device /dev/usbscanner< [plustek] >#< [plustek] ># or simply< [plustek] ># [usb]< [plustek] >#< [plustek] ># or if you want a specific device but you have no idea about the< [plustek] ># device node or you use libusb, simply set vendor- and product-ID< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device auto< [plustek] >#< [plustek] ># NOTE: autodetection is safe, as it uses the info it got< [plustek] ># from the USB subsystem. If you're not using the< [plustek] ># autodetection, you MUST have attached that device< [plustek] ># at your USB-port, that you have specified...< [plustek] >#< [plustek] >< [plustek] >[usb] 0x04a9 0x2220< [plustek] next device is a USB device (0x04A9-0x2220) [plustek] ... next device [plustek] >< [plustek] >#< [plustek] ># options for the previous USB entry< [plustek] >#< [plustek] ># switch lamp off after xxx secs, 0 disables the feature< [plustek] ># (can also be set via frontend)< [plustek] >option lampOff 300< [plustek] Decoding option >lampOff< [plustek] >< [plustek] ># warmup period in seconds, 0 means no warmup, -1 means auto-warmup< [plustek] ># (can also be set via frontend)< [plustek] >option warmup -1< [plustek] Decoding option >warmup< [plustek] >< [plustek] ># 0 means leave lamp-status untouched, not 0 means switch off< [plustek] ># on sane_close< [plustek] ># (can also be set via frontend)< [plustek] >option lOffOnEnd 1< [plustek] Decoding option >lOffOnEnd< [plustek] >< [plustek] >#< [plustek] ># options to tweak the image start-position< [plustek] ># (WARNING: there's no internal range check!!!)< [plustek] >#< [plustek] ># for the normal scan area< [plustek] >#< [plustek] >option posOffX 0< [plustek] Decoding option >posOffX< [plustek] >option posOffY 0< [plustek] Decoding option >posOffY< [plustek] >< [plustek] ># for transparencies< [plustek] >option tpaOffX 0< [plustek] Decoding option >tpaOffX< [plustek] >option tpaOffY 0< [plustek] Decoding option >tpaOffY< [plustek] >< [plustek] ># for negatives< [plustek] >option negOffX 0< [plustek] Decoding option >negOffX< [plustek] >option negOffY 0< [plustek] Decoding option >negOffY< [plustek] >< [plustek] >#< [plustek] ># for setting the calibration strip position< [plustek] ># (WARNING: there's no internal range check!!!)< [plustek] ># -1 means use built in< [plustek] ># (can also be set via frontend)< [plustek] >option posShadingY -1< [plustek] Decoding option >posShadingY< [plustek] >option tpaShadingY -1< [plustek] Decoding option >tpaShadingY< [plustek] >option negShadingY -1< [plustek] Decoding option >negShadingY< [plustek] >< [plustek] >#< [plustek] ># to invert the negatives, 0 disables the feature< [plustek] >#< [plustek] >option invertNegatives 0< [plustek] Decoding option >invertNegatives< [plustek] >< [plustek] >#< [plustek] ># to disable the internal sensor speedup function,< [plustek] ># 1 disables the feature< [plustek] >#< [plustek] >option disableSpeedup 0< [plustek] Decoding option >disableSpeedup< [plustek] >< [plustek] >#< [plustek] ># to save/restore coarse calibration data< [plustek] ># (can also be set via frontend)< [plustek] >option cacheCalData 0< [plustek] Decoding option >cacheCalData< [plustek] >< [plustek] >#< [plustek] ># use alternate calibration routines< [plustek] >#< [plustek] >option altCalibration 0< [plustek] Decoding option >altCalibration< [plustek] >< [plustek] >#< [plustek] ># for skipping whole calibration step< [plustek] >#< [plustek] >option skipCalibration 0< [plustek] Decoding option >skipCalibration< [plustek] >< [plustek] >#< [plustek] ># for skipping entire fine calibration step< [plustek] ># coarse calibration is done< [plustek] >#< [plustek] >option skipFine 0< [plustek] Decoding option >skipFine< [plustek] >< [plustek] >#< [plustek] ># discard the result of the fine white calibration< [plustek] >#< [plustek] >option skipFineWhite 0< [plustek] Decoding option >skipFineWhite< [plustek] >< [plustek] ># for replacing the gain values found during coarse< [plustek] ># calibration< [plustek] ># (can also be set via frontend)< [plustek] >option red_gain -1< [plustek] Decoding option >red_gain< [plustek] >option green_gain -1< [plustek] Decoding option >green_gain< [plustek] >option blue_gain -1< [plustek] Decoding option >blue_gain< [plustek] >< [plustek] ># for replacing the offset values found during coarse< [plustek] ># calibration< [plustek] ># (can also be set via frontend)< [plustek] >option red_offset -1< [plustek] Decoding option >red_offset< [plustek] >option green_offset -1< [plustek] Decoding option >green_offset< [plustek] >option blue_offset -1< [plustek] Decoding option >blue_offset< [plustek] >< [plustek] >#< [plustek] ># for replacing the default lampoff settings, this< [plustek] ># works only for CIS devices like CanoScan LiDE20< [plustek] ># (can also be set via frontend)< [plustek] >option red_lampoff -1< [plustek] Decoding option >red_lampoff< [plustek] >option green_lampoff -1< [plustek] Decoding option >green_lampoff< [plustek] >option blue_lampoff -1< [plustek] Decoding option >blue_lampoff< [plustek] >< [plustek] >#< [plustek] ># for adjusting the default gamma values< [plustek] ># (can also be set via frontend)< [plustek] >option redGamma 1.0< [plustek] Decoding option >redGamma< [plustek] >option greenGamma 1.0< [plustek] Decoding option >greenGamma< [plustek] >option blueGamma 1.0< [plustek] Decoding option >blueGamma< [plustek] >option grayGamma 1.0< [plustek] Decoding option >grayGamma< [plustek] >< [plustek] >#< [plustek] ># to enable TPA (EPSON or UMAX, if autodetection fails)< [plustek] ># 0 means default behaviour as specified in the internal tables< [plustek] ># 1 means enable (needed for UMAX 3450)< [plustek] >option enableTPA 0< [plustek] Decoding option >enableTPA< [plustek] >< [plustek] >#< [plustek] ># model override functionality, currently only available for< [plustek] ># Mustek devices, using NSCs' vendor ID: 0x0400 and< [plustek] ># also their product ID: 0x1000 (LM9831) 0x1001 (LM9832)< [plustek] >#< [plustek] ># mov/PID | 0x1000 | 0x1001< [plustek] ># ---------------------------------------< [plustek] ># 0 (default)| BearPaw1200 | BearPaw 2400< [plustek] ># 1 | ignored | BearPaw 1200< [plustek] >#< [plustek] >option mov 0< [plustek] Decoding option >mov< [plustek] >< [plustek] >#< [plustek] ># and of course the device-name< [plustek] >#< [plustek] ># device /dev/usbscanner< [plustek] >device auto< [plustek] Decoding device name >auto< [plustek] >#device libusb:001:005< [plustek] >< [plustek] >#< [plustek] ># to define a new device, start with a new section:< [plustek] ># [usb]< [plustek] >#< [plustek] attach (auto, 0xbfef73c8, (nil)) [plustek] Device configuration: [plustek] device name : >auto< [plustek] USB-ID : >0x04A9-0x2220< [plustek] model ovr. : 0 [plustek] warmup : -1s [plustek] lampOff : 300 [plustek] lampOffOnEnd : yes [plustek] cacheCalData : no [plustek] altCalibrate : no [plustek] skipCalibr. : no [plustek] skipFine : no [plustek] skipFineWhite: no [plustek] invertNegs. : no [plustek] dis.Speedup : no [plustek] pos_x : 0 [plustek] pos_y : 0 [plustek] pos_shading_y: -1 [plustek] neg_x : 0 [plustek] neg_y : 0 [plustek] neg_shading_y: -1 [plustek] tpa_x : 0 [plustek] tpa_y : 0 [plustek] tpa_shading_y: -1 [plustek] red gain : -1 [plustek] green gain : -1 [plustek] blue gain : -1 [plustek] red offset : -1 [plustek] green offset : -1 [plustek] blue offset : -1 [plustek] red lampoff : -1 [plustek] green lampoff: -1 [plustek] blue lampoff : -1 [plustek] red Gamma : 1.00 [plustek] green Gamma : 1.00 [plustek] blue Gamma : 1.00 [plustek] gray Gamma : 1.00 [plustek] --------------------- [plustek] usbDev_open(auto,0x04A9-0x2220) - 0x80754a8 [plustek] Vendor ID=0x04A9, Product ID=0x2220 [plustek] usbio_DetectLM983x [plustek] usbio_DetectLM983x: found LM9832/3 [plustek] * setting device to idle state! [plustek] Detected vendor & product ID: 0x04A9-0x2220 [plustek] Device description for >0x04A9-0x2220< found. [plustek] usb_initDev(43,0x04a9,-1) [plustek] Device WAF : 0x00000002 [plustek] Transferrate: 1000000 Bytes/s [plustek] Device Flags: 0x00000000 [plustek] Vendor adjusted to: >Canon< [plustek] LAMP-STATUS: 0x00000000 [plustek] RESETTING REGISTERS(-1) - 0x80 [plustek] MISC I/O after RESET: 0x66, 0x16, 0x91 [plustek] Calibration file-names set to: [plustek] >/root/.sane/Canon-LiDE25-coarse.cal< [plustek] >/root/.sane/Canon-LiDE25-fine.cal< [plustek] usb_SetScanParameters() [plustek] usb_GetMCLKDivider() [plustek] usb_GetMCLKDiv() [plustek] * PhyBytes = 6 [plustek] * PhyLines = 4 [plustek] * TotalBytes = 24 [plustek] * Scansteps=72 (9*1200/150) [plustek] usb_SetScanParameters() done. [plustek] usbDev_getCaps() [plustek] Scanner information: [plustek] Vendor : Canon [plustek] Model : LiDE25 [plustek] Flags : 0x00000000 [plustek] drvclose() [plustek] usbDev_stopScan() [plustek] usbDev_ScanEnd(), start=0, park=0 [plustek] usbDev_close() [plustek] attach: model = >LiDE25< [plustek] sane_get_devices (0xbfef9508, 0) [plustek] sane_open - libusb:001:012 [plustek] Presetting Gamma tables (len=4096) [plustek] * Channel[0], gamma 2.000 [plustek] * Channel[1], gamma 2.000 [plustek] * Channel[2], gamma 2.000 [plustek] * Channel[3], gamma 2.000 [plustek] ---------------------------------- [plustek] sane_start [plustek] usbDev_open(libusb:001:012,0x04A9-0x2220) - (nil) [plustek] Vendor ID=0x04A9, Product ID=0x2220 [plustek] usbio_DetectLM983x [plustek] usbio_DetectLM983x: found LM9832/3 [plustek] Detected vendor & product ID: 0x04A9-0x2220 [plustek] Device description for >0x04A9-0x2220< found. [plustek] usb_initDev(43,0x04a9,43) [plustek] Device WAF : 0x00000002 [plustek] Transferrate: 1000000 Bytes/s [plustek] Device Flags: 0x00000006 [plustek] Vendor adjusted to: >Canon< [plustek] LAMP-STATUS: 0x00000000 [plustek] RESETTING REGISTERS(43) - 0x80 [plustek] MISC I/O after RESET: 0x66, 0x16, 0x91 [plustek] usbDev_getCaps() [plustek] scanmode = 3 [plustek] usbDev_getCropInfo() [plustek] usb_GetImageInfo() [plustek] PPL = 202 [plustek] LPA = 150 [plustek] BPL = 606 [plustek] brightness 0, contrast 0 [plustek] usbDev_setScanEnv() [plustek] usb_SaveImageInfo() [plustek] * dwFlag = 0x00000400 [plustek] usb_GetImageInfo() [plustek] * Preview Mode NOT set! [plustek] Setting map[0] at 0x0808914c [plustek] Setting map[1] at 0x0808d14c [plustek] Setting map[2] at 0x0809114c [plustek] usbDev_startScan() [plustek] LAMP-STATUS: 0x00000000 [plustek] Switching Lamp on [plustek] Warmup-Timer started [plustek] LAMP-STATUS: 0x00000001 [plustek] Lamp-Timer stopped [plustek] dwflag = 0x40000400 dwBytesLine = 606 [plustek] Lines = 150 [plustek] Bytes per Line = 606 [plustek] Bitdepth = 8 [plustek] TIME START [plustek] local_sane_start done [plustek] reader_process started (forked) [plustek] reader_process:starting to READ data (90900 bytes) [plustek] buf = 0x08095c90 [plustek] usbDev_PrepareScan() [plustek] sane_start done scanimage: scanning image of size 202x150 pixels at 24 bits/pixel scanimage: acquiring RGB frame [plustek] cano_DoCalibration() [plustek] ######################### [plustek] usb_SpeedTest(43,1000000) [plustek] GETMCLK[10/2], using entry 8: 6.000, 1200 [plustek] SETMCLK[10/2]: 6.000 [plustek] usb_SetScanParameters() [plustek] usb_GetMCLKDivider() [plustek] usb_GetMCLKDiv() [plustek] * PhyBytes = 30606 [plustek] * PhyLines = 1 [plustek] * TotalBytes = 30606 [plustek] usb_SetScanParameters() done. [plustek] usb_ScanBegin() [plustek] usb_DownloadShadingData(1) [plustek] usb_ScanBegin() done. [plustek] usb_IsDataAvailableInDRAM() [plustek] Data is available [plustek] usb_ScanReadImage() failed [plustek] usbDev_ScanEnd(), start=1, park=0 [plustek] UIO error [plustek] usb_SetScanParameters() [plustek] Scanner not ready!!! [plustek] ######################### [plustek] usb_AutoWarmup() [plustek] - function skipped, CIS device! [plustek] GETMCLK[10/2], using entry 8: 6.000, 1200 [plustek] SETMCLK[10/2]: 6.000 [plustek] GETMCLK[10/2], using entry 0: 3.000, 100 [plustek] SETMCLK[10/2]: 3.000 [plustek] UIO error [plustek] Scanner not ready!!! [plustek] Sensor-position NOT reached [plustek] cano_PrepareToReadWhiteCal() failed [plustek] calibration failed!!! [plustek] IPC: Transferrate = 2000000 Bytes/s [plustek] drvclose() [plustek] TIME END 1: 132s [plustek] usbDev_stopScan() [plustek] usbDev_ScanEnd(), start=1, park=1 [plustek] reader_process: read failed, status = -9004, errno 19 [plustek] UIO error [plustek] UIO error [plustek] Lamp-Timer started (using ITIMER) [plustek] usbDev_close() [plustek] close_pipe (r_pipe) scanimage: min/max graylevel value = 255/0 scanimage: sane_read: Error during device I/O [plustek] sane_cancel [plustek] do_cancel [plustek] >>>>>>>> killing reader_process <<<<<<<< [plustek] (SIG) Child is down (signal=17) [plustek] reader_process killed [plustek] TIME END 2: 132s [plustek] sane_close [plustek] sane_exit [plustek] Shutdown called (dev->fd=-1, libusb:001:012) [plustek] Lamp-Timer stopped Правда пока ничего не понимаю, в чем тут проблема. =\ Кто-нибудь может помочь расшифровать, что ему не хватает? -- Евсюков Денис Анатольевич Тольяттинская Академия Управления JID: [EMAIL PROTECTED] E-mail: [EMAIL PROTECTED] E-mail: [EMAIL PROTECTED] -- ubuntu-ru mailing list ubuntu-ru@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru
